Where is the child lock located on the Volkswagen Tharu?

1 Answers
Boromir
07/28/25 4:53pm
The child lock on the Volkswagen Tharu is located on the inner edge of the rear doors. The child safety lock is a security device designed to ensure the safety of children sitting alone in the rear seats, preventing the danger of children accidentally opening the car doors while the vehicle is in motion. Key activation method: Insert the key into the child lock control socket and rotate it in the indicated direction to tighten. Deactivation method: Rotate the keyhole in the opposite direction to unlock. The Tharu is a compact SUV under the Volkswagen brand, equipped with two engines: one is a 1.4-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine.
Was this review help?
10
5
Share
More Forum Discussions

What is the special feature of the Aston Martin DB11?

Aston Martin DB11's special feature is flash charging. Below are the specific details of the Aston Martin DB11: Model Positioning: The Aston Martin DB11 is a supercar under the Aston Martin brand. Interior: The interior design of the Aston Martin DB11 continues the family tradition, almost entirely wrapped in genuine leather. The control knob for the multimedia system, developed in collaboration between Aston Martin and Mercedes-Benz, is almost identical to the Mercedes COMAND operation knob. Power: The Aston Martin DB11 is equipped with a brand-new 5.2T twin-turbocharged V12 engine, with a maximum output power of around 600 horsepower (441kW).
18
3
Share

Buick P1101 Intake Flow System Performance?

P1101 intake flow system performance failure may be caused by an air leak in the intake system or a damaged mass air flow (MAF) sensor. It is necessary to check whether there is any air leakage in the pipeline between the MAF sensor and the throttle body. To determine if the MAF sensor is damaged, you can unplug the MAF sensor connector. If the car can start normally, it indicates that the MAF sensor is damaged. Precautions for the vehicle intake flow system: Cleaning and replacement of the air filter: Cleaning of the intake pipe: The intake pipe should be disassembled and cleaned with a cleaner to remove dust and debris accumulated inside. This can effectively ensure the airflow into the engine, reduce air intake resistance, improve the engine's charging efficiency, and thus ensure the engine's power performance. Replacement of the air filter: When the vehicle has been driven for 10,000 kilometers, the air filter may become very dirty. At this point, cleaning methods cannot restore its filtering function or remove the internal dust, and replacement is required.
19
5
Share

What is the maximum wading depth of the Wuling Sunshine?

According to official specifications, the Wuling Sunshine has a maximum wading depth of 26 cm. Common tire specifications include 155R13LT and 165/70R13, with a body length of 3797mm, curb weight ranging from 930-997kg, and equipped with a 5-speed manual transmission (MT). Maximum wading depth refers to the deepest water level a vehicle can safely pass through. Generally, sedans have a maximum wading depth not exceeding 30 cm, while SUVs typically have higher wading depths (though it's advisable not to exceed 50 cm). Among common models: GAC Trumpchi GS8 (30 cm), Audi A4 (32 cm), Volkswagen Sagitar (30 cm), Range Rover (90 cm), Jeep Compass (48 cm), and Highlander (45 cm). SUVs clearly surpass sedans in wading capability. Vehicle owners should take different precautions based on water depth and vehicle characteristics: When water reaches exhaust pipe level: Relatively safe. Exhaust pressure can expel water unless the engine stalls in water. When water reaches door sill level: Hazardous. Electrical components and sensors concentrated in lower areas may short-circuit, causing critical failures. When water reaches air intake level: Extremely dangerous. Immediate engine stalling may occur, potentially causing permanent engine damage.
7
5
Share

Is the Quality of Changan and Changan Oushang the Same?

There is little difference in quality between Changan and Changan Oushang. Taking the Oushang X5 as an example, here are the specific details of the Oushang X5: Vehicle Positioning: The Oushang X5 is positioned as a compact SUV, with body dimensions of 4490mm x 1860mm x 1580mm and a wheelbase of 2710mm. Safety Features: The Changan Oushang X5 adopts a high-strength steel ring body design, with high-strength steel accounting for 78%. It includes DMS (Driver Monitoring System), LDW, ACC, AEB, ESP, ABS, EBD, BAS, TCS, ultra-high-definition surround-view dashcam, cloud-eye rearview mirror, 360-degree panoramic imaging, and bodyguard mode. Suspension: It features front MacPherson independent suspension and rear torsion beam non-independent suspension.
3
1
Share

What is the fuel consumption of the Borui?

The actual fuel consumption of the Geely Borui is approximately 8.7L/100km. Extended information: Fuel consumption per 100 kilometers: This refers to the fuel consumption of a vehicle traveling a certain speed for 100 kilometers on the road, which is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis. The measured values are converted into speed parameters, and then the vehicle is driven at specified speeds to calculate the theoretical experimental fuel consumption data per 100 kilometers for the model. Since most vehicles approach their economical speed at 90 km/h, the theoretical fuel consumption figures released to the public are usually the fuel consumption per 100 kilometers at 90 km/h. For the Borui, which weighs 1760kg: The 1.8T engine provides sufficient power at startup, and the fuel consumption naturally increases when driving in urban areas where speeds are lower. Of course, once the speed reaches 60 km/h, the engine speed exceeds 2,000 rpm, and the turbocharger delivers excellent acceleration power in the latter stages.
1
0
Share

What Causes a Renault to Fail to Start Due to Brake System Malfunction?

Renault's failure to start due to brake system malfunction can be attributed to brake shoe failure, insufficient brake fluid, ABS system failure, or spark plug malfunction. Below are additional details: Brake pad failure: Abnormal or irregular wear of brake shoes; brake pads need replacement. Oil leakage (brake fluid) or insufficient brake fluid; brake fluid requires replacement. Battery discharge: ABS system failure, abnormal wheel speed sensors or wiring; check if the battery is discharged and recharge it promptly. Spark plug malfunction: Faulty spark plugs leading to increased ignition gap, resulting in failure to start. Replacing the spark plugs will resolve the issue.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.