Where is the child lock located on the Lavida?

1 Answers
Joshua
07/29/25 2:29pm
Lavida's child lock is located on the side of the rear doors, featuring a small orange toggle switch that can be seen when the door is opened. It can be activated by turning it with a key. Once the child safety lock is engaged, the rear doors cannot be opened from the inside, even if the central locking system is not activated. The purpose of the child lock is to prevent curious or restless children from opening the doors during the ride, thereby avoiding potential dangers. The Lavida is a compact sedan under the Volkswagen brand, with dimensions of 4670 mm in length, 1806 mm in width, and 1474 mm in height, and a wheelbase of 2688 mm. The Lavida is equipped with three engine options: a 1.2-liter turbocharged engine, a 1.4-liter turbocharged engine, and a 1.5-liter naturally aspirated engine.
Was this review help?
14
1
Share
More Forum Discussions

What is the difference between 48V mild hybrid and plug-in hybrid?

48V mild hybrid and plug-in hybrid differ in the following ways: 1. Different working principles: The 48V mild hybrid system consists of a 48V lithium-ion battery pack and an integrated starter/generator. The battery pack is installed at the rear of the vehicle or under the rear seat, and the mild hybrid starter generator replaces the traditional alternator and starter motor. Plug-in hybrid, as the name suggests, is a hybrid vehicle that requires plugging in a charger to charge. This type of vehicle is equipped with a conventional internal combustion engine, a small electric motor, and a battery pack, with the battery directly connected to the electric motor. 2. The 48V mild hybrid is more efficient but costly. The 48V electrical system provides many new technologies for vehicles, which is a future development trend. Compared to PHEV (plug-in hybrid electric vehicles), it is more efficient and can create more possibilities. However, the downside is that the integrated generator and starter motor result in higher repair costs if damaged, and the failure rate is also higher than that of conventional vehicles.
10
0
Share

What is the bulb model for a 125cc motorcycle headlight?

The bulb model for a 125cc motorcycle headlight is X9-H4. Below is relevant information about motorcycle headlights: 1. Function: Motorcycle headlights primarily serve illumination and signaling purposes. The light emitted illuminates the road conditions ahead, enabling safe nighttime riding. 2. Classification: Motorcycle lights can be categorized by light source into halogen tungsten lamps and xenon lamps. Halogen lamps emit light through tungsten filaments with relatively low lumen output, insufficient brightness, high power consumption, and a short lifespan of only 600 hours. 3. Application: Motorcycle headlights (high beam and low beam) are used during nighttime and foggy conditions to clearly see vehicles and pedestrians ahead. However, when meeting oncoming traffic, the low beam should be used to avoid affecting the other party's visibility and prevent collisions.
4
5
Share

Can the Guaneng T5 have its speed limit removed?

Yes, the speed limit can be removed. Here are the detailed introductions of Guaneng T5: 1. Seven core components: Three complementary core components including TTFAR motor, TTFAR graphene battery, and TTFAR energy recovery controller, as well as four hardware components consisting of TTFAR energy monitoring instrument, TTFAR low rolling resistance tires, TTFAR resistance-reducing cables, and TTFAR low wind resistance body. 2. Appearance: The Guaneng T5 adopts a bold line design, giving the vehicle a strong muscular feel. The body conforms to the TTFAR low wind resistance design, which can reduce the vehicle's air resistance, thereby improving the range. The body material uses ABS thickened plastic parts, which not only enhance the overall texture but also withstand daily bumps and collisions.
11
4
Share

Is the Fuel Consumption of the Xingyue L High?

The comprehensive fuel consumption of the Xingyue L is 6.8-7.8L/100km. There are currently 7 models of the Xingyue L on sale. The two-wheel-drive luxury model, two-wheel-drive flagship model, two-wheel-drive premium model, four-wheel-drive flagship model, and four-wheel-drive premium model have a comprehensive fuel consumption of 6.8L/100km. The two-wheel-drive intelligent premium model and two-wheel-drive comfort model have a comprehensive fuel consumption of 7.8L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.0-10.4L/100km. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements, as larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
17
1
Share

Can a Faulty Crankshaft Position Sensor Cause Engine Stalling?

The crankshaft position sensor plays a crucial role in determining the position of the crankshaft, specifically its rotational angle. It typically works in conjunction with the camshaft position sensor to establish the fundamental ignition timing. Crankshaft Sensor: It generally collaborates with the camshaft position sensor to determine the basic ignition timing. There are typically three types of crankshaft sensors: magnetic induction type, Hall effect type, and optical type. The most common magnetic induction crankshaft position sensors are usually categorized as 2-wire or 3-wire. Sensor Inspection: To check the sensor, turn off the ignition switch and disconnect the crankshaft position sensor connector. Measure the resistance between terminal 1 and terminal 2 of the sensor; it should read between 400 to 600 ohms. If the reading falls outside this range, it indicates a fault in the crankshaft position sensor itself, and the sensor should be replaced.
10
3
Share

After how many years does a double-row vehicle require biannual inspections?

Generally, vehicles over 15 years old require two inspections per year. Private cars are exempt from inspection for the first 6 years after purchase. Inspection schedule: The annual vehicle inspection schedule is determined by the initial registration date of the vehicle. For example, if the registration date on the vehicle's license is June 2015, then the annual inspection should be conducted every June. According to Article 40 of the newly revised "Motor Vehicle Registration Regulations", vehicle owners can apply for an inspection compliance mark at the vehicle management office up to three months before the expiration of the current inspection period. This means that vehicles due for inspection in June can undergo the inspection in April, May, or June. Vehicle inspection items: Inspection includes appearance check, exhaust emission test, window tint transparency check, traffic violation check, and safety inspection, which covers a comprehensive examination of components such as horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, license plate installation, etc.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.