Where is the child lock located on the Buick Verano?

1 Answers
OBeau
07/29/25 8:12pm
Verano's child lock is located on the inner edge of the rear doors. The child lock, also known as the car child safety lock, is a safety device designed to ensure the safety of children sitting alone in the rear seats. It prevents the danger of children accidentally opening the door from inside while the vehicle is in motion. More relevant details are as follows: 1. When using the child safety lock, first open the rear door and gently push the small lever below the door lock toward the direction with the child icon, then close the door. 2. When the car child safety lock is engaged, even if the central locking system is unlocked, the door will remain locked. In this case, the door can only be opened from the outside. Therefore, if you find that the rear door cannot be opened from inside while it works normally from outside, check if the child safety lock has been accidentally engaged.
Was this review help?
9
0
Share
More Forum Discussions

What is the fuel tank capacity of the BAIC Huansu S6?

The fuel tank capacity of the BAIC Huansu S6 is 60 liters, as officially announced. The BAIC Huansu S6 uses 92-octane gasoline, with a fuel consumption of 7.7-7.8L per 100 kilometers. A full tank can cover a distance of 769-779 kilometers. During daily driving, it is important to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the specified tank capacity.
1
0
Share

Where is the horn located on the 10th-generation Civic?

The 8 speaker locations of the 10th-generation Civic are in the four doors and behind the rear seats. Concept of the horn: The horn is the acoustic signaling device of a car. During driving, the driver emits necessary acoustic signals as required and regulated to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. Principle of the horn: The car's electric horn produces sound through the vibration of a metal diaphragm. It consists of an iron core, magnetic coil, contacts, armature, and diaphragm. When the driver presses the horn switch, current flows through the contacts to the coil, generating a magnetic force that pulls down the armature, forcing the diaphragm to move. The movement of the armature opens the contacts, interrupting the current and causing the coil's magnetic force to disappear. The diaphragm, along with the armature, returns to its original position due to its own elasticity and the spring plate. The contacts close again, allowing current to flow through the coil once more, repeating the above process.
8
4
Share

Does the 10th Generation Accord Elite Edition Have Tire Pressure Monitoring?

The 10th Generation Accord Elite Edition is equipped with tire pressure monitoring. Function of Tire Pressure Monitoring: Tire pressure monitoring continuously and automatically monitors the tire pressure during vehicle operation and alerts the driver in case of tire leaks or low pressure to ensure driving safety. Types of Tire Pressure Monitoring: Tire pressure monitoring is mainly divided into two types: indirect tire pressure monitoring (Wheel-Speed Based TPMS, abbreviated as WSB) and direct tire pressure monitoring (Pressure-Sensor Based TPMS, abbreviated as PSB). Additionally, there is a composite TPMS. Tire Pressure Control: For normal driving, maintaining the tire pressure of all four tires between 2.2-2.5 bar is acceptable. If the vehicle is fully loaded and carrying additional cargo in the trunk, the rear tire pressure can be appropriately increased to 2.6 bar. The spare tire, which is not used frequently, can be inflated to 2.8 bar.
15
5
Share

How Often Should the Fuel Filter in the 10th Generation Accord Be Replaced?

It is recommended to replace the Accord's fuel filter every 5,000 kilometers or every 3 months. Types of Fuel Filters: There are two types of fuel filters, also known as fuel filters. One is the inline fuel filter, and the other is the built-in fuel filter. Introduction to Fuel Filters: The fuel filter, abbreviated as Fuel Filter, is an important component of the engine. Its main function is to filter out impurities in the gasoline. If the fuel filter becomes dirty or clogged, the main symptoms include: slow acceleration or inability to accelerate, difficulty starting the car, and sometimes requiring 2-5 attempts to start. Modern fuel filters are generally made of paper elements enclosed in hard plastic casings. When the fuel filter is clogged, the resistance of the filter increases, causing poor gasoline flow and affecting fuel supply. Therefore, it is essential to replace the fuel filter promptly. Replacement of the Fuel Filter: The fuel filter should generally be replaced every 10,000 kilometers. It is a consumable part and needs timely replacement. Symptoms: If the car accelerates slowly or requires multiple attempts to start, it may be time to consider replacing the fuel filter.
16
3
Share

How is the safety of the Corolla?

The safety of the Corolla is at a mid-level, certainly not comparable to luxury cars. Greatest advantages of the Corolla: Low fuel consumption; comfortable ride, relatively smooth driving; rich and user-friendly interior configurations. Power of the Corolla: Overall power is good with quick acceleration, but the start is relatively slow. The engine noise is small, with users commenting that 'the sound is very quiet, and the noise inside the car is minimal.' However, when driving exceeds 80 kilometers per hour, the tire noise becomes significant, leading some owners to modify their cars for better sound insulation. The new dual VVT-i engine pairs perfectly with the CVT continuously variable transmission, with the 2.0L engine providing ample power. The six-speed manual transmission is highly precise with clear gear engagement, but the four-speed transmission is relatively outdated.
13
4
Share

Where is the engine number stamped on the Heyue?

The engine number of the Jianghuai Heyue is engraved on the vehicle's nameplate, which also includes the chassis number and production date, located on the body at the rear of the engine. Purpose of the engine number: The engine number exists to provide traceability for the engine, allowing for tracking in case of issues or manufacturer investigations. The sequence and content of the engine number vary depending on the manufacturer. Uniqueness of the engine number: The engine number is a unique identifier. Each motor vehicle has a separate engine, which bears specific information such as the engine model, exact production date, and production location code. This information is crucial for vehicle identification and must not be altered or replaced.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.