Where is the child lock located on a Polo car?

1 Answers
Clifford
07/25/25 3:22am
polo car child lock is located under the left and right rear door locks, which is black and can be toggled. The door child safety lock is a feature designed to prevent children from accidentally opening the door while the vehicle is in motion, thereby avoiding potential harm to them. The principle of the child lock is quite simple: the mechanical lock's switch consists of the interior and exterior door handles, which operate on a dual-lever principle to open the mechanical lock. The child lock functions by disabling the interior handle control lever, preventing the door from being opened from inside. The Polo is a car model introduced by Shanghai Volkswagen, with dimensions of 4053mm in length, 1751mm in width, and 1446mm in height, and a wheelbase of 2564mm.
Was this review help?
20
5
Share
More Forum Discussions

How to distinguish between intake and exhaust camshafts in Wuling Hongguang?

In Wuling Hongguang, the letter 'i' on the camshaft represents intake, and 'e' represents exhaust. The main body of the camshaft is a cylindrical rod approximately the same length as the cylinder group. The camshaft is fitted with several cams, whose function is to drive the intake and exhaust valves to open and close. Both the intake and exhaust camshafts are equipped with a drive wheel, which is directly driven by a chain or belt to rotate the camshaft. Camshaft maintenance methods: 1. Inspection of camshaft journal wear: First clean the camshaft thoroughly, then measure directly with an outside micrometer. If the wear exceeds the allowable range, replace the camshaft. 2. Inspection of the fit clearance between the camshaft journal and the bore: Measure the inner diameter of the journal bore with a camshaft journal gauge, and measure the size of the corresponding camshaft journal with an outside micrometer. The difference between the two is the fit clearance. 3. Inspection of cam lift: Position the camshaft as above, place the dial indicator pointer against the cam surface of the camshaft for direct measurement. If the measured value exceeds the allowable value, replace the camshaft.
19
5
Share

Why can't I check my score after passing Subject Four?

After passing the Subject Four exam, the issuance of the driver's license begins, and all exam records are archived. Individuals cannot access these records themselves; they need to inquire at the vehicle management office or their driving school. After the implementation of the Ministry of Public Security's Order No. 123, the Subject Three exam was divided into two parts: the road test and an additional safe and civilized driving test, commonly known as Subject Four. Since this test is conducted after Subject Three, it is conventionally referred to as the Subject Four exam. However, the official terminology does not include the term 'Subject Four.' Subject Four, also known as the Subject Four theory test or driver theory test, is part of the assessment for the motor vehicle driver's license. The original exam consisted of the Subject One theory test, Subject Two stake test, electronic Subject test, and Subject Three road test. According to the Ministry of Public Security's Order No. 123, a theory test is conducted after the road test. Since this test follows Subject Three, it is commonly referred to as the Subject Four exam. However, the official terminology (i.e., the Ministry of Public Security's Order No. 123) does not include the term 'Subject Four.' Subject Four separates the requirements related to safe and civilized driving from Subject One, including safe driving skills under complex conditions and emergency handling knowledge, and conducts them after the 'Subject Three' actual road driving test to further assess the candidate's level of traffic awareness.
11
5
Share

What is the difference between the first and second sessions of Subject 2 driving test?

The difference between the first and second sessions of the Subject 2 driving test is only the sequence in time, and everything else is the same. Candidates for the Subject 2 test are divided into multiple sessions, with a fixed number of people in each session and the same duration of 45 minutes. The first session, also known as the first batch of test-takers, enters the test site following the examiner's instructions; the second session, or the second batch, enters after the first session is completed. Additional information: 1. Review the process before the test: Before the test, go through the process in your mind, then review the test precautions and the difficulties of each project. During the test, follow the steps in order, which makes it less likely to forget operations due to nervousness. 2. Don't panic if the engine stalls: If the engine stalls during the test, don't panic, return the vehicle to neutral before restarting. When going uphill, pay attention to stepping on the brake, because stalling only deducts 10 points, but stalling again or the vehicle rolling back will result in an immediate failure. 3. Driving test is half skill and half mentality: The driving test also tests your mentality. Skills are relatively easy to master through long-term practice, while adjusting your mentality depends on the individual candidate. Practice steadily during usual training and build a solid foundation. During the test, maintain a normal mindset and perform as you would during training, and you will definitely pass the test smoothly.
6
0
Share

What are the symptoms of poor spark plug ignition?

Symptoms of poor spark plug ignition include: difficulty starting the car, low power, excessive exhaust emissions, and increased fuel consumption. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its condition based on the following appearance colors. A normal spark plug's insulator skirt and electrodes should appear gray-white, gray-yellow, or light brown. If the spark plug has oil stains or deposits, the spark plug itself is not damaged. If the top of the spark plug shows blistering, black streaks, or similar phenomena. Symptoms of spark plug failure: difficulty starting the car, low power, excessive exhaust emissions, and increased fuel consumption. Steps to replace a spark plug: Open the engine hood, lift the plastic engine cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage distributor wires in the firing order, then secure the cover.
1
3
Share

How to Remove Formaldehyde in the Car?

Methods to remove formaldehyde in the car include: 1. Develop the habit of driving with windows slightly open to maintain fresh air circulation and accelerate formaldehyde dissipation; 2. Use activated charcoal to absorb formaldehyde; 3. Use an air compressor to atomize and spray solvent inside the car; 4. Use Shui Zhi Rui car disinfectant; 5. Utilize negative ion deodorization services at car maintenance centers. Methods to detect formaldehyde are: 1. Use a formaldehyde detector to accurately measure formaldehyde levels; 2. Formaldehyde self-test kits offer an economical, convenient, and easy-to-use alternative; 3. If you notice a pungent odor in the car, it likely contains harmful gases including formaldehyde.
20
2
Share

Do I need to pay again if I miss the Subject 1 exam?

Missing the Subject 1 exam is considered an absence, and you will need to pay the fee again. There is no limit to the number of times you can take the Subject 1 exam, and each attempt gives you two chances. If you fail both attempts, you will need to reschedule the exam. The Subject 1 exam covers basic knowledge of motor vehicles; laws, regulations, and road traffic signals; safe driving and civilized driving fundamentals; and basic knowledge related to motor vehicle driving operations. The Subject 1 exam process is as follows: First, follow the instructions of the staff and collect your driving training file in order at the waiting area. Bring and present your ID card for verification by the supervising officer. Note that you must turn off your phone when entering the exam area, no loud talking is allowed, and law textbooks are not permitted in the exam area (or should be placed in your bag). After the exam, keep your ID card safe and submit your file to the "Document Submission Window" at the front of the exam room. Candidates who pass the exam will sign under the guidance of the staff at the exit before leaving. Candidates who fail the exam can leave immediately and wait for notification from their driving school regarding the retake schedule.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.