Where is the chassis number stamping located on the Mercedes-Benz S350?

1 Answers
Tobias
07/29/25 5:10pm
The VIN (Vehicle Identification Number) for the Mercedes-Benz S350 is located under the hood. Below is an introduction to related Mercedes-Benz information: 1. Mercedes-Benz SAM: The control unit, also known as the Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing a safety hazard. 2. Mercedes-Benz Introduction: A German automotive brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical standards, rigorous quality benchmarks, continuous innovation, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automotive and brand logos globally. Mercedes-Benz cars not only offer unparalleled quality but also a comprehensive range of models, currently producing mainly A-Class (compact cars), C-Class (mid-range sedans and coupes), E-Class (luxury sedans and coupes), S-Class (premium sedans and coupes), and G-Class (SUV off-road vehicles).
Was this review help?
7
0
Share
More Forum Discussions

What Causes the Clicking Sound When the Car Fails to Start?

The car fails to start and makes a clicking sound, which may be caused by the following reasons: 1. The starter motor is faulty and cannot drive the flywheel to rotate. Check whether the starter motor is working when starting the vehicle. 2. The battery is faulty and cannot store power. If you can only hear the sound of the starter when starting the car, it is very likely that the battery is dead and cannot start the car. 3. The fuel supply system of the vehicle is faulty. Disconnect the oil pipe joint on the engine, turn the ignition switch to the position where the instrument lights are on, and observe whether there is oil flowing out. If there is oil flowing out, the fuel supply system is fine; if not, further inspection is needed. 4. The ignition system of the vehicle is faulty. Pull out one of the ignition high-voltage wires on the engine, insert an old spark plug or other pen-shaped metal rod into the spark plug cap, and place the spark plug body or metal rod close to the metal part of the engine. Start the engine and observe whether there is a high-voltage spark phenomenon. If not, check the ignition system for problems.
19
3
Share

What Does It Mean When the Engine Fault Light Comes On?

When the engine fault light comes on, it indicates issues such as sensor malfunction, poor combustion state, or carbon buildup inside the engine. Below are the common causes for the engine fault light illuminating. Poor Combustion State: A poor combustion state is the primary reason for the engine fault light to come on. In automotive design, to ensure the engine operates in good condition and maintains a normal working lifespan, oxygen sensors are installed to monitor the engine's combustion state. If the combustion state is poor, it not only pollutes the environment but also leads to fuel wastage and excessive engine wear. Poor Fuel Quality: Many drivers who notice the engine fault light coming on share a common experience: the light suddenly illuminates after refueling with a new tank of gas. This is because engines have specific requirements for fuel quality, especially as regulations increasingly demand higher performance from engines, thus raising the standards for fuel quality. In reality, some gas stations fail to fully comply with these standards and provide fuel that meets the requirements of high-performance engines, leading to frequent occurrences of the engine fault light coming on.
1
2
Share

Can motorcycles use the non-motorized vehicle lane?

Motorcycles are not allowed to use the non-motorized vehicle lane. Introduction to non-motorized vehicle lanes: Non-motorized vehicle lanes are primarily dedicated to vehicles such as bicycles, flatbed carts, tricycles, electric vehicles, and animal-drawn carts. Non-motorized vehicles have many unique advantages, especially in terms of environmental protection, which holds significant practical importance. Width of non-motorized vehicle lanes: When various non-motorized vehicles travel together, different width combinations will occur. The lateral safety distance between two different types of non-motorized vehicles is approximately 0.4-0.5m. In China, the design of urban road non-motorized vehicle lanes generally uses bicycles as the design vehicle. The trajectory of a bicycle is serpentine, with a lateral swing distance of about 0.2m on each side. The handlebar width of each bicycle is 0.6m, so the width of a single bicycle lane is calculated as 1m. When bicycles travel on the road, the distance from the bicycle to the curb is 0.45m; when traveling in a tunnel, the distance from the bicycle to the wall should be 0.6m.
2
3
Share

What is the definition of a slow charging port for new energy vehicles?

Definition of slow charging port for new energy vehicles: Slow charging refers to the process where the charger delivers current, and the vehicle's charger converts this current into electrical energy for charging. Difference between slow charging and fast charging: Some vehicles have their fast and slow charging ports located in different positions, so it's necessary to confirm the vehicle's parking position during actual charging. Fast charging adopts a 'simple and direct' method: storing direct current (DC) directly into the power battery; whereas slow charging requires the onboard charger to convert alternating current (AC) into DC before charging the power battery. Advantages of slow charging: Slow charging is stable, safe, and takes a longer time. Conventional charging piles are mostly slow chargers with 220V household voltage, requiring only the plug of the onboard charger to be inserted into a power socket in the parking lot or nearby to start charging. The current and voltage required for slow charging are smaller, making it suitable for civilian circuits, and installation is convenient.
13
2
Share

How Long Does a New Car Take to Be Considered a Stock Car?

There is no clear definition of a stock car, and there are no relevant national regulations specifying the term 'stock car.' However, in the automotive sales industry, the term 'stock car' does exist. Generally, it refers to vehicles that have been in stock for more than three months or half a year. For imported cars, due to factors such as transportation cycles, those that have been manufactured for half a year or more can also be considered stock cars. Stock cars can be divided into two scenarios: 1. Long-term stationary storage: The tires, rubber seals, and other components of the car mostly age. Tires, due to prolonged fixed contact with the ground, will inevitably become out of round. The battery, when not started, will also discharge over time, leading to a depleted state. Various oils and lubricants, due to gravity, flow to the bottom, preventing effective protection of engine components. 2. Dealers store the car indoors, periodically warming up the engine to circulate fluids and charging the battery. To prevent tire aging, the vehicle is moved regularly. In this case, the car's condition remains relatively good without significant aging.
18
0
Share

What to Do When BYD S6 Fails to Detect the Key?

Here are the specific reasons and solutions for the BYD S6 failing to detect the key: 1. Battery power shortage. For cars with batteries used for more than 2 years or parked for a long time, you can use a multimeter to measure the voltage to determine if the battery is low on power. Generally, the voltage should be around 12V when not powered, and above 10V when starting. This can rule out battery failure. 2. Poor fuse contact. Gently tap the fuse box with your hand. If the car starts, it indicates poor fuse contact. 3. Starter motor failure. If the battery has power but you don't hear the starter motor sound when pressing the start button, it may be a starter motor failure, and you need to replace the starter motor at a repair shop. 4. Ignition system failure. Ignition system failures include ignition coil failure, spark plug failure, and connection line failure. The S6 has two ignition coils and four spark plugs. The chance of both ignition coils or spark plugs failing simultaneously is relatively high. Check the connectors before and after the ignition coil to prevent loose connections and observe if the car can start. It is recommended to leave this to professionals. 5. Fuel pump power supply failure. You can unplug the fuel pump connector and measure the voltage or current when starting the car.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.