Where is the chassis number stamped on an Iveco vehicle?

2 Answers
AlanDella
07/24/25 5:14am
The specific location of the Iveco chassis number is on top of the engine in the front engine compartment of the vehicle. Below is relevant information about the Iveco Daily: Model Features: The overall design is more youthful, with a large mesh grille at the front paired with slim headlights, making it quite appealing. The newly launched Daily covers commercial vehicles, vans, light trucks, and special vehicle chassis with a total weight ranging from 4 to 7 tons. In terms of body dimensions, depending on the chassis model (vehicle type), the NewDaily's wheelbase can range from 3000mm up to 4750mm, with a maximum body length of 6190mm. Additionally, the NewDaily van comes in different heights: 1545mm, 1900mm, or 2100mm, depending on the size. Interior: The new vehicle's dashboard features a symmetrical design, and for ease of operation, elements such as the gear shift and functional area buttons are centrally located. Moreover, the Iveco NewDaily offers abundant storage space inside the cabin, with numerous storage compartments on the inner door panels and dashboard. In terms of configuration, the new vehicle is equipped with ESP (standard), lane departure warning, rearview camera, air suspension, multimedia entertainment system, Bluetooth phone, and GPS navigation system, with options available for customization based on customer needs.
Was this review help?
11
2
Share
LaCecilia
08/11/25 12:55am
I've handled quite a few Iveco vehicles. The VIN stamping location is mainly on the small platform in the engine compartment near the lower corner of the windshield, usually embossed on the metal frame. Another common spot is on the inner bottom edge of the driver's door frame – you'll need to open the door and bend down to check the metal strip for engravings. The VIN is extremely important as it serves as the vehicle's ID card, required for verification during ownership transfer, insurance claims, or traffic police inspections. Some vehicles may have faded numbers due to long-term use or rust, so it's recommended to regularly clean the area with a brush to reveal clear digits. If you can't find it, don't worry – check the vehicle manual or visit the official website for model-specific locations. Older models might have it on the front crossbeam; use a small flashlight to carefully inspect corners for better visibility.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

How to use cruise control on Honda CR-V?

Honda CR-V cruise control usage method: Press the power button to activate the system (the on/off functions may be combined in one button or separated into two buttons). At this point, the cruise control indicator light on the instrument panel will illuminate. Accelerate to your desired speed and press the SET button. You can then release the accelerator pedal with your right foot, as the speed will be maintained at the current level. Use the RES and SET buttons to make fine adjustments to the speed. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda Automobile Company. In terms of body dimensions, the Honda CR-V measures 4550mm in length, 1820mm in width, and 1685mm in height.
1
4
Share

What are the common causes of frequent electronic power steering issues in the Hongguang S?

Common causes of electronic power steering failures are as follows: Air in the system: A large amount of air in the power steering system can cause abnormal car steering. Electrical faults: Poor contact in the internal connectors or motor of the electronic power steering. Control valve failure: Foreign objects in the steering hydraulic lines can cause the steering pump flow control valve to stick, or excessive wear of the steering gear piston cylinder and poor sealing of the oil seal, leading to control valve adhesion or damage. Hydraulic system failure: Loose connections in the power steering system can cause steering fluid leakage, overloading the steering system, resulting in excessive wear of the stator and rotor inside the steering pump, leading to irregular oil movement and abnormal noises.
10
4
Share

What are the differences between the new and old BMW X3 models?

The differences between the new BMW X3 and the old BMW X3 are as follows: In terms of body dimensions: The new X3 measures 4717mm in length, 1891mm in width, and 1689mm in height; the old X3 measures 4648mm in length, 1881mm in width, and 1661mm in height. In terms of engine: The new X3 is equipped with a 184 horsepower 2.0T turbocharged engine; the old X3 is equipped with a 258 horsepower 3.0-liter naturally aspirated engine. The maximum torque is different, with the new X3 having a maximum torque of 300nm and the old X3 having a maximum torque of 310nm.
14
2
Share

What are the side effects of modifying a BMW key to a blade style?

It is basically the same as the original version, with no side effects. The following is a related introduction to the BMW blade key: Blade design: Many of BMW's new models feature keys with a blade design, which are finely crafted and eliminate the hassle of later modifications; Upgraded version: BMW's latest smart blade key is an upgrade from the original M3 color scheme. The key's shape is meticulously designed, focusing on hand grip comfort and ease of use while also exuding a sense of luxury and elegance. It has a moderate weight and a substantial feel. The exterior of the key is made of aluminum alloy and ABS materials, with a polished surface that provides an exceptionally smooth touch. A special coating is applied to effectively prevent paint chipping and oxidation.
19
4
Share

How to Correct the Car Body When Reversing?

When reversing, always pay attention to the rearview mirrors and control the clutch properly. Use your naked eye to judge the distance between the car body and the lines on both sides, ensuring the width is equal on both sides. Continuously observe the left and right rearview mirrors, and when the widths on both sides are equal, quickly straighten the steering wheel. Continue to control the speed with the clutch and reverse slowly. The main technique for correcting an uneven car body is to turn the steering wheel in the opposite direction and then straighten it at the right moment.
14
1
Share

What is the qx license plate?

qx license plate is the military vehicle license plate of the Western Theater Command. The following is a specific introduction to vehicle license plates: 1. Concept: Vehicle license plates are hard-numbered plates with unified format and style as stipulated by national vehicle management regulations, issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for license plates. 2. Function: Generally, there are two plates, installed at designated positions on the front and rear of the vehicle as required. Vehicle license plates are the legal certificates allowing vehicles to drive on the road, serving as credentials for road traffic management departments, public security management departments, and the general public to supervise vehicle driving conditions, identify, remember, and search for vehicles.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.