Where is the chassis number of the Great Wall Wingle 5 pickup truck?

Where to Check the Production Date of Goodyear Tires?

Goodyear tire production dates can be found on the tire sidewall. The production date is typically represented by a four-digit number, where the first two digits indicate the week of production and the last two digits represent the year. For example, "3512" means the tire was produced in the 35th week of 2012. Below are the functions of tires: 1. Tires serve as the medium for transmitting forces between the vehicle and the road surface, transferring driving force, braking force, steering force, etc., thereby enabling the vehicle's driving, braking, and steering operations. 2. Supporting the vehicle's load. The vehicle's load causes the tire to compress until the average pressure on the tire's contact area balances with the internal inflation pressure. 3. Reducing and absorbing vibrations and impacts during driving, preventing early damage to vehicle components due to severe vibrations. At the same time, tires adapt to the vehicle's high-speed driving conditions, reduce driving noise, and ensure driving safety, comfort, handling stability, and fuel efficiency.

12

3

Share

Why is there a gasoline smell inside the car when starting it?

The following are the reasons for the gasoline smell inside the car when starting it: 1. Under very low external temperatures, when the water temperature and exhaust pipe temperature are low, combined with the cold start of the engine in winter, the mixture is richer, and some of the mixture cannot burn completely, being directly discharged through the exhaust pipe, which results in a gasoline smell. This is a normal phenomenon. 2. It might be due to issues with the carbon canister or the carbon canister solenoid valve, causing the mixture to be too rich during startup. 3. If the local temperature is low and there is excessive carbon buildup inside the engine, leading to poor mixture atomization, a gasoline smell may also occur. 4. If the solenoid valve remains closed, the gasoline vapor in the carbon canister will accumulate more and more, eventually filling the entire canister, and the excess gasoline vapor will escape into the atmosphere, also causing a gasoline smell. 5. There might be leakage in the fuel injector, resulting in an overly rich mixture, and the unburned mixture will be discharged through the exhaust pipe, thus causing a gasoline smell.

4

2

Share

Are the hazard warning flasher and double flasher the same light?

The hazard warning flasher and double flasher refer to the same thing. It is a signal light used to alert other vehicles and pedestrians that the vehicle is experiencing special circumstances. Below are common situations when the hazard warning flasher should be activated: Vehicle breakdown: If a vehicle suddenly breaks down while driving on the road and cannot be moved to a safe area promptly, the hazard warning flasher should be turned on immediately to alert passing vehicles and pedestrians for safety, and the authorities should be notified while waiting for assistance. Highway breakdown: If a vehicle breaks down on the highway, it should be parked in the emergency stopping lane, with the hazard warning flasher activated promptly. Additionally, a warning sign should be placed 150 meters behind the vehicle, and the authorities should be notified quickly. The driver and passengers should wait for rescue outside the guardrail in front of the disabled vehicle. Towing a malfunctioning vehicle: When towing a malfunctioning vehicle, both the towing vehicle and the towed vehicle should have their hazard warning flashers activated simultaneously, as the vehicles are in an abnormal state. This alerts passing vehicles and pedestrians, especially those approaching from behind, to avoid sudden lane changes or insufficient safe distances, which could lead to dangerous situations.

8

2

Share

How to Properly Use High Beam and Low Beam Headlights?

Here are the correct methods for using high beam and low beam headlights: 1. On roads without street lighting or with poor lighting, high beams can be used. However, when encountering other vehicles or pedestrians, switch to low beams to avoid glare. 2. When unfamiliar with the road conditions and needing to read road signs or other indicators, high beams can be used, but should be quickly switched back to low beams. 3. When overtaking another vehicle, the left turn signal should be activated in advance, and the driver should alternate between high and low beams or use the horn to alert the vehicle ahead to yield. 4. When passing through corners, curves, or intersections without traffic signals, alternating between high and low beams can serve as a warning. 5. When entering a tunnel, turn on high beams; when encountering oncoming vehicles, switch to low beams in advance. 6. In urban areas with street lighting at night, low beams must be used. 7. Driving in areas without street lighting at night, or during dusk when it is darker or at dawn when light is just appearing, requires the use of low beams. 8. In heavy fog, snow, or heavy rain when visibility is obstructed, low beams must be used even during the day.

8

4

Share

Can a C1 driver's license drive a yellow-plate vehicle?

C1 driver's license cannot drive yellow-plate vehicles. Holders of a C1 license can drive manual or automatic transmission minivans and commercial vehicles with 9 seats or less; can drive small passenger vehicles with 9 seats or less; can drive light and small cargo vehicles with a total mass of 4,500 kg or less, a vehicle length of 6 meters or less, and an approved load capacity of 1,500 kg or less, all three conditions must be met simultaneously. If any one exceeds the specified limits, the vehicle cannot be driven. Below is an introduction to the types of vehicles that a C1 license cannot drive: 1. Vehicles that a C1 license cannot drive: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. 2. C1 license does not permit riding motorcycles. Without a D or E license, driving a motorcycle is considered unlicensed driving, even if holding a C1 license. According to Article 99 of the Safety Law, 'Driving a motor vehicle without obtaining a motor vehicle driver's license, or when the motor vehicle driver's license has been revoked or temporarily suspended, shall be fined not less than 200 yuan but not more than 2,000 yuan, and may also be detained for not more than 15 days.'

3

1

Share

How to Maintain the Car Cooling System?

Here are the methods for maintaining the car cooling system: 1. Selection of coolant: It is best to use river water with low hardness. If well water is used, it should be boiled and softened before use. The best option is to use antifreeze. 2. Pay attention to the technical condition of each component: If the radiator is found to be leaking, it should be repaired. If the water pump or fan is found to wobble or make abnormal noises, they should be repaired promptly. 3. Inspection and adjustment of fan belt tension: If the fan belt is too loose, it not only affects the cooling airflow but also increases the engine workload and accelerates belt wear due to slipping. If the belt is too tight, it will accelerate the wear of the water pump bearing and generator bearing. Therefore, the belt tension should be checked during use and adjusted if necessary. If it does not meet the specifications, the position of the generator and adjusting arm can be changed for adjustment. 4. Regular descaling: After the engine has been used for a certain period, scale will deposit in the water tank and radiator, affecting heat dissipation. Therefore, regular cleaning is necessary. The cleaning method involves adding enough cleaning solution to the cooling system, soaking for a period, then starting the engine to run at low to medium speed for a certain time before draining the cleaning solution while it is hot, followed by rinsing with clean water. 5. If the engine is found to be overheating, check promptly for water shortage. If there is a shortage, stop the engine and add sufficient coolant after it cools down. If the thermostat is not functioning properly, causing the engine to operate at excessively high or low temperatures, it should be repaired or replaced promptly.

6

2

Share

Where is the chassis number of the Great Wall Wingle 5 pickup truck?

Where to Check the Production Date of Goodyear Tires?

Why is there a gasoline smell inside the car when starting it?

Are the hazard warning flasher and double flasher the same light?

How to Properly Use High Beam and Low Beam Headlights?

Can a C1 driver's license drive a yellow-plate vehicle?

How to Maintain the Car Cooling System?

What is the royal-black tire brand?

What brand has a vertical rectangular logo?

Why was the Shuai Ke discontinued?

Why is polishing ineffective for tree sap that has penetrated car paint?