···
Log in / Register

Where is the charging port of Yadea electric vehicle?

3 Answers
McJaxson
07/29/25 6:47am
Yadea electric vehicle charging port is under the seat and on the side of the body, and the charging port is marked. Electric vehicle is a relatively common means of transportation. The main components and functions are as follows: The electronic control system is used to control the whole vehicle circuit. Without the electronic control system, the electric vehicle cannot operate normally; The motor is the power source of the electric vehicle, which is responsible for driving the electric vehicle forward; The battery is the component used to store electric energy on the electric vehicle. This component can supply power to all electronic devices on the electric vehicle. The battery is a vulnerable part that needs to be replaced regularly. With the increase of charging and discharging times, the performance of the battery will also decrease.
Was this review help?
15
5
Share
MacEmersyn
08/12/25 10:49pm
I've had my Yadea electric bike for almost a year now. I remember when I first got it, I spent quite some time looking for the charging port. Turns out it's right under the seat, next to the battery cover – just lift the seat and you'll see it. It's usually hidden on the plastic panel above the battery, with the plug protected by a blue cover. Always remember to close the cover after charging to prevent water damage and short circuits. Charging typically takes 6-8 hours, and it automatically stops when fully charged – avoid overcharging to protect the battery. I'd recommend new users check the manual to locate it as positions vary slightly between models, but Yadea designs them to be easily found. For daily use, just plug it in somewhere dry.
Was this review help?
16
1
Share
Expand All
TylerFitz
10/04/25 4:25am
Safety is crucial when charging. I’ve been using Yadea for commuting long-term, and the charging port is mostly located under the seat, near the battery. Before plugging in, check if the cover is tightly closed to prevent rainwater or dust from entering and causing leakage. The design is very user-friendly—just crouch down, and it’s visible. I recommend avoiding charging during hot afternoons or in the rain; keep the area ventilated and dry to prevent battery overheating and accidents. If the location isn’t obvious, refer to the vehicle manual for specifics. Yadea typically places charging ports in easily accessible spots for maintenance, minimizing risks. Simply remember: lift the seat, find the protective cover, and plug in.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

Is it necessary to apply film to the sunroof?

No. After applying film to the sunroof, the increased glass thickness may, if not installed properly, lead to difficulties in opening and closing the sunroof and affect its sealing performance. Here are some additional details: 1. Reasons: The primary purpose of applying film is to block UV rays and provide heat insulation, as well as to prevent injuries from shattered glass. However, sunroofs generally do not require film, as most sunroof glass already offers good heat insulation. If the sunroof is used infrequently, the sunshade can effectively block sunlight. 2. The role of a car sunroof: In summer, especially when the car is parked under the scorching sun, the temperature inside the car can become extremely high. The best way to cool down is to open the windows for ventilation, allowing air to circulate. If the car has a sunroof, air exchange inside the vehicle will be faster. Using this method cools the car 2-3 times faster than using the air conditioning and also saves fuel.
6
0
Share

What are the differences between multi-point fuel injection and direct injection?

The following are the differences between multi-point fuel injection and direct injection: 1. Different definitions: Multi-point fuel injection refers to the process where gasoline fuel is injected into the intake manifold during the operation of a gasoline engine, controlled by a specific sequence of commands from the control program and executed by electronic fuel injectors. Direct injection, on the other hand, involves injecting fuel directly into the cylinder to mix with the intake air. 2. Different development speeds: The application of direct injection technology represents a significant attempt by people, and it is gradually replacing multi-point fuel injection. Moreover, the development of direct injection technology is progressing rapidly, with major automakers competing to research this technology, achieving quite remarkable results. Currently, Volkswagen is one of the automakers that has achieved relatively mature direct injection technology. 3. Different levels of fuel efficiency: Direct injection allows for a more balanced fuel injection compared to multi-point fuel injection vehicles, enabling more complete combustion of fuel during engine operation. This is an area where multi-point fuel injection vehicles can never match.
19
3
Share

What is the standard tire pressure for the Haojue 125 scooter?

The front tire pressure should be maintained at 2.0 bar, and the rear tire pressure should be maintained at 2.5 bar, as the average pressure for all four tires of the vehicle is around 2.2 bar. Each tire has a maximum pressure limit, and exceeding this specified value can lead to the risk of a tire blowout. Conversely, if the tire pressure is too low, the tire may wear out prematurely. Therefore, tire pressure must be adjusted in combination with the maximum pressure value of the tire's rating. Below is more related information: 1. Types of tires: There are various types of tires, including high-performance racing slicks, which can effectively prevent tire slippage. If conditions permit, you may opt for racing slicks. If conditions are limited, you can choose anti-skid tires, which feature larger tread patterns to enhance grip. 2. Installing snow chains: In special road conditions, such as icy or snowy surfaces, snow chains can be installed to improve tire grip and prevent slippage. However, this method is only suitable for specific road conditions. Using snow chains on regular roads, while providing anti-skid benefits, will noticeably increase vehicle vibration and limit speed.
19
1
Share

Which cities have implemented the China VI emission standards?

The following 9 provinces and municipalities have officially confirmed the early implementation of the China VI standards, which took effect from January 1st. These cities are Beijing, Tianjin, Hebei, Shandong, Shanxi, Henan, Guangzhou, Shenzhen, and Hainan. Additional information: 1. The implementation of China VI is divided into two phases: China VIa and China VIb. China VIa serves as a transitional phase from China V, with emission standards further improved based on China V, while China VIb represents the true China VI standard, the most stringent emission standard in history, imposing stricter requirements and limitations than Euro VI in many aspects. 2. It should be noted that the China VI standard is formulated based on international standards and is currently one of the most stringent emission standards globally, reaching the level of EU current vehicle fuel standards, with some indicators even surpassing EU standards. Compared to the currently implemented China V standard, China VI not only unifies gasoline and diesel standards but also introduces more requirements in eight areas, including particulate emission limits, test cycles and procedures, emission warranty periods, real-world driving emissions, and onboard diagnostics, making it the most stringent domestic emission standard. This poses direct challenges for automakers, the engine industry, component manufacturers, and after-treatment plants, primarily in terms of technological upgrades.
5
5
Share

What's the situation when the car won't start but the dashboard lights are on?

When the dashboard lights are on but the car won't start, the most common fault issues are insufficient battery power or engine problems. Such issues require professional instrument repair at a 4S shop. Insufficient battery power is a frequently encountered phenomenon. If the dashboard lights are on, it indicates that the battery still has some power, but not enough to start the engine. The dashboard lights being on shows that the battery has some power left, and the key can still be turned, but the power is insufficient to start the engine. When turning the key, you may encounter the following phenomena: 1. Severe power loss, with no response at all when turning the key (in this case, the dashboard might not light up). 2. During startup, the dashboard flickers, accompanied by a "clicking" sound, which is a very standard sign of battery power loss, and the starter shows no response. 3. The dashboard flickers, and you can hear the starter turning, but it operates weakly, which is a milder sign of power loss, but it still makes it difficult to start the car. This is a battery issue. If the battery hasn't been replaced in over 3 years, it should be replaced promptly; otherwise, frequent difficulties in starting the car may occur.
12
4
Share

How to Use Hazard Warning Lights When Parking a Manual Transmission Car?

Generally, there is a button with a red triangle symbol located on the center console. Pressing this button will activate the vehicle's hazard warning lights. It is important for drivers to note that these lights should only be used in relatively urgent situations. Hazard warning lights, also known as emergency flashers or hazard lights, serve to alert, warn, and indicate during accidents or other emergencies. When a vehicle encounters an emergency and must stop by the roadside, the hazard lights should be turned on, and a triangular safety warning sign should be placed at a certain distance behind the vehicle. However, if the hazard lights are turned on while waiting for someone in urban areas where short stops are allowed, it constitutes misuse. In the event of a traffic accident where the vehicle cannot be moved to a safe area, the driver should immediately activate the hazard lights to signal danger to other road users, call the police, and while waiting for rescue, all occupants should exit the vehicle and move to a safe location. According to relevant traffic laws, on regular roads, hazard lights may only be used in conjunction with fog lights during foggy conditions. In other weather conditions such as rain, snow, or sandstorms, hazard lights must not be used while driving on regular roads.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.