···
Log in / Register

Where is the charging port of Haval H2s?

4 Answers
DiEliana
07/29/25 3:08pm
The USB port of Haval H2s is located inside the center armrest box between the front seats. The main functions of the USB port in the car: Using the standard power supply in the car, the USB port can be used to charge electrical devices or serve as a fixed power supply interface for electrical devices. The USB port is a type of vehicle transmission line, featuring fast transmission speed, convenient use, support for hot-swapping, flexible connection, and independent power supply. It is generally a universal interface for devices like USB drives and MP3 players. Precautions for using the USB port: Charging should only be done when the car's engine is running to avoid damage to electrical devices due to unstable power supply. Do not connect too many electrical devices at once, as this may overload and damage the car battery and generator. Avoid using the USB port during thunderstorms to prevent lightning strike accidents. Do not use the USB port in humid environments, as rust or water stains may cause the USB drive to fail to connect properly.
Was this review help?
9
5
Share
DiEmilio
08/13/25 7:48am
I remember driving the Haval H2S for quite some time. There are charging ports under the front center console, usually in the area in front of the gear shift. You can feel a 12V cigarette lighter socket and a few USB ports there. The USB ports are USB-A type, and while the charging speed isn’t fast, it’s sufficient for navigation or charging phones. If you can’t find them, check around the armrest or rear air vents—there might be additional ports there. The design is quite user-friendly, preventing distractions while driving. For long trips, bringing a converter allows for fast charging, but don’t forget to check if the fuse is blown to avoid unexpected power cuts. Some people on forums complain that the ports are too low, requiring bending to use, but you get used to it over time. In newer models, the position has been optimized. The H2S’s range isn’t top-tier, but the charging ports are durable—just avoid inserting too forcefully. It’s best to clean the ports regularly to keep them dust-free. The manual has detailed diagrams, so downloading it is recommended to avoid mistakes.
Was this review help?
6
5
Share
Expand All
VanHailey
08/13/25 7:49am
When repairing cars, the Haval H2S is frequently encountered. The charging port location isn't complicated—it's positioned near the driver at the lower section of the dashboard, featuring a row of small ports including a 12V cigarette lighter and a standard USB. The model might vary slightly between years, but post-2016 models have it standard in a clearly visible front position. If you can't find it, avoid random poking; first rule out fuse failures or poor wiring connections. Relevant details: The USB outputs 5V2A power, suitable for phones but not high-wattage devices. For fast charging, use the cigarette lighter with an adapter. Maintenance-wise, the plastic ports easily accumulate dust; regular cleaning can extend their lifespan. Keep children from tampering to prevent short circuits or fires. The H2S's overall electrical system is stable, but avoid overloading when adding accessories. Check grounding to prevent interference with the audio system. During regular maintenance, inspect the port condition to avoid major repairs later.
Was this review help?
18
4
Share
Expand All
BellaMarie
10/11/25 6:41am
I just got my Haval H2S recently and had a hard time finding the charging ports! They're all conveniently located near the gear shift lever on the front console - both the USB and cigarette lighter ports are within easy reach. Though it's a bit disappointing that there's no charging port reserved for the rear seats, it's sufficient for daily use. Take your time when exploring and don't rush - the design proves quite handy for phone navigation during drives. The screen doesn't lag while charging, but the USB-A port is relatively slow, so bringing a power bank on long trips gives peace of mind. Beginners often overlook the manual diagrams - online video tutorials helped me a lot to avoid incorrect insertions. Once you're clear about the locations, it becomes much more convenient without distracting from driving. Just remember not to search for them while the vehicle is in motion.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

Will Timing Chain Skipping Teeth Definitely Cause Valve Interference?

Timing chain skipping teeth does not necessarily cause valve interference. Methods to determine if valve interference occurs due to timing chain skipping: 1. Abnormal sounds: When the car is idling, there are slight noises; at medium speed, the noises become obvious; at high speed, the noises become chaotic or disappear; when accelerating sharply, the noises reappear, and in severe cases, the timing gear cover vibrates. This indicates excessive timing gear meshing clearance. 2. After major repairs or timing gear replacement: Continuous noises occur, with louder noises at higher speeds, especially noticeable during sharp acceleration. This indicates insufficient timing gear meshing clearance. 3. Rhythmic noises can be heard at idle: The noises increase with rising speed. This indicates uneven timing gear meshing. 4. Clear, rhythmic metal knocking sounds at idle: The noises worsen with increasing speed. This indicates axial displacement of the timing gear or damage to individual gear teeth.
6
5
Share

What happens if the Domain Tiger 7 cannot start due to urea deficiency?

Domain Tiger 7's inability to start due to urea deficiency will result in engine weakness, but it does not affect the vehicle's driving. The vehicle should be sent to the nearest service station for inspection and repair. Introduction to automotive urea: Automotive urea refers to a urea aqueous solution with a urea concentration of 32.5% and a solvent of ultra-pure water. The raw materials are special automotive urea materials and ultra-pure water. The role of automotive urea: Automotive urea is an essential product for heavy-duty diesel vehicles to meet the National IV emission standards. It mainly plays a role in purifying exhaust gas in vehicles, reacting with nitrogen oxides in the exhaust gas to reduce nitrogen oxide emissions. The main function of automotive urea is to convert nitrogen oxides (NOx) produced by diesel engines into non-toxic nitrogen gas (N2), reducing the content of NOx in the exhaust gas to comply with national emission standards.
14
1
Share

How to Replace the Battery in a Cadillac Key Fob?

Here are the steps to replace the battery in a Cadillac car key: 1. Hold the key fob upright, press the metal button, and then pull out the mechanical key. 2. Use a flat-head screwdriver to pry open the key fob by inserting it into the gap. 3. Once opened, you will see the battery inside. Remove the old battery. 4. Insert the new battery and reassemble the key fob. Here is more information about Cadillac: 1. Cadillac is a world-renowned luxury automobile brand under General Motors (USA), established in 1902 in Detroit, known as the Motor City of America. 2. Cadillac cars feature the famous wreath and crest emblem, symbolizing their leadership in the automotive industry. This intricate and meaningful badge also represents the Cadillac family's heritage as royal nobility, reflecting the courage and honor of the ancestors of Detroit's founders.
14
1
Share

What are the differences between the Accord 10th Gen 230 and 260?

The differences between the 230 and 260 mainly include the following points: 1. Price: The 230 is priced lower than the 260; the 230 has two models, one of which does not meet the China 6 emission standard and only meets the China 5 emission standard. The 260 has four models, all divided into China 5 and China 6 emission standards. 2. Power: The 230 is equipped with a low-power version of the 1.5T inline 4-cylinder turbocharged engine, paired with a CVT continuously variable transmission, with a maximum power of 130KW and a maximum torque of 230Nm. The 260 is equipped with a high-power version of the 1.5T inline 4-cylinder turbocharged engine, paired with a CVT continuously variable transmission, with a maximum power of 143KW and a maximum torque of 260Nm. 3. Configuration: The 230 lacks the following configurations: side airbags, cruise control, rearview camera, electric adjustment for the driver's seat, and electric adjustment for the passenger seat.
17
3
Share

What are the differences between Corolla Twin Engine E and regular Twin Engine?

The difference lies in the engine. The Twin Engine E+ adds charging functionality, and the battery pack capacity is also increased, with the Twin Engine E+'s battery having higher energy density. Below is an introduction to the Corolla Twin Engine E: 1. The Corolla Twin Engine is positioned in the SML-H market, launched in 2015, within the price range of A-segment cars. It adopts Toyota's advanced hybrid dual-engine technology, ensuring excellent power performance while maintaining low fuel consumption and low emissions. 2. The FAW Toyota Corolla Twin Engine E+ features a plug-in hybrid system, qualifying for green license plates and controllable fuel consumption. Without charging, its combined fuel consumption is only 4.3L/100km, making it very fuel-efficient, which is a favorite among many consumers. 3. The interior of the Corolla Twin Engine E+ feels very cozy and looks high-end, featuring a leather-wrapped three-spoke multifunction steering wheel, a 4.2-inch LCD instrument panel, and an 8-inch touchscreen LCD display, giving a strong sense of technology.
2
0
Share

What Causes Nissan Key System Malfunctions?

Nissan key system malfunctions can be attributed to the following reasons and solutions: Dead Battery: The battery may be dead or have poor contact. Key Control Module Failure: Malfunction of the timing control module in the remote key can also render the remote ineffective. Aging of Remote Transmitter Antenna: Aging of the vehicle's remote transmitter antenna, among other factors, can lead to this issue. In such cases, it is advisable to visit a repair station for inspection and repair. Handling Key System Malfunctions in Venucia D60: First, try using the spare key to determine if it functions normally. If the spare key works properly, it indicates that the other key is faulty. You can have it reprogrammed at a 4S shop or an external auto repair shop. Remember to copy the key serial number from the user manual, as it will be needed during the reprogramming process.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.