Where is the Changan Mazda factory located?

1 Answers
DiJoel
07/30/25 12:25am
Changan Mazda factory is located in Nanjing. Taking the Changan Mazda CX30 2020 manual Shangyue model as an example, its body structure is a 5-door 5-seat SUV with dimensions of 4395mm in length, 1797mm in width, and 1545mm in height, with a wheelbase of 2653mm. The Changan Mazda CX30 2020 manual Shangyue model is equipped with a 2.0L inline 4-cylinder naturally aspirated engine, with a maximum power of 116 kW at 6000 rpm, and a maximum torque of 202 Nm at 4000 rpm, paired with a 6-speed manual transmission.
Was this review help?
19
0
Share
More Forum Discussions

What is the difference between car heat insulation film and explosion-proof film?

Specific differences are as follows: 1. Analysis of car sun film: Car sun film refers to the film pasted on the surface of car glass, commonly known as sun film. In addition to heat insulation and light blocking, it also has explosion-proof functions. High-quality explosion-proof film uses special polyester film as the base material, which itself has strong toughness and is combined with special pressure-sensitive adhesive. In case of accidents, the glass will not shatter and cause injury after being broken. Car explosion-proof film also has the functions of one-way perspective and reducing glare. 2. Analysis of car explosion-proof film: Car explosion-proof film is the highest level of safety film, that is, explosion-proof film products. It adds a layer of protection to car glass to prevent glass from shattering and fix broken glass fragments when colliding with the outside world, providing certain protection for the personal safety of the car owner. 3. Differences between car sun film and explosion-proof film: (1) Differences in material structure and thickness: The thickness of safety film is between 100-175 microns (about 4-7mil), while car explosion-proof film is a multi-layer polyester composite film made by special lamination process, with a thickness of more than 250 microns (about 10mil). Thickness is a hard indicator to distinguish safety film from security film. (2) Differences in protection level and concept: Sun film is mainly made of the original PET material and magnetron sputtering technology, and its function is to insulate heat and control harmful light, that is, to block infrared and ultraviolet rays. The design of explosion-proof film can absorb explosion shock waves and resist stronger energy impacts. High-end explosion-proof film combined with glass can even reach the bulletproof level, and its protection function covers the effect of safety film while reaching the level of safety explosion-proof. (3) There are obvious differences in the implementation standards: The standard that car sun film can generally achieve is the level standard of blocking ultraviolet rays, while the detection standard of explosion-proof film is based on preventing penetration, that is, when the glass is hit, the glass can be broken, but the explosion-proof glass film layer cannot be penetrated.
6
3
Share

How to Open the Car Door When the Entire Vehicle Has No Power?

If it is a conventional folding key, you can directly use the mechanical key to open the door when there is no power. The basic components of a remote key are as follows: 1. Transmitter: Composed of a transmission switch, transmission antenna, integrated circuit, etc., it includes an identification code storage circuit and an amplitude modulation modulation circuit, with a button-type lithium battery installed on the opposite side of the circuit. The transmission frequency uses radio waves, and each press of the transmission switch button sends a signal once; 2. Receiver: After the transmitter sends the identification code using shortwave modulation, it is received by the car's shortwave antenna and enters the shortwave high-frequency amplification processor of the receiver's electronic control unit through a distributor for demodulation, where it is compared with the demodulator's identification code.
9
0
Share

Why Doesn't Beijing Use Ethanol Gasoline?

Beijing is not avoiding ethanol gasoline, but it has not yet been widely adopted. Here is an expanded explanation: 1. Introduction to Ethanol Gasoline: Ethanol gasoline refers to the addition of 10% (in China) of fuel ethanol (commonly known as alcohol) to regular unleaded gasoline. In simple terms, it is gasoline blended with 10% biofuel ethanol. It is typically denoted by the letter 'E' following the gasoline octane rating, such as E92#, E95#, and E98#. 2. Disadvantages of Ethanol Gasoline: Ethanol has a lower calorific value than conventional gasoline, approximately 60% of regular automotive gasoline, which can increase engine fuel consumption by 5%. Additionally, it reduces vehicle performance, fuel economy, and cold-start capability, negatively impacting acceleration. 3. Advantages of Ethanol Gasoline: The ethanol in ethanol gasoline is a renewable resource with mature technology. It burns more completely, effectively reducing harmful exhaust emissions and benefiting environmental protection. Ethanol gasoline also has excellent cleaning properties, effectively eliminating the deposition and coagulation of fuel impurities in the fuel tank and fuel system.
20
4
Share

What Causes the Vibration When Turning on the AC in an 8th Generation Accord?

Vibration when turning on the AC in a car is generally caused by carbon buildup on the spark plugs, carbon buildup on the throttle body, or a deformed fan or loose screws. Below is a detailed explanation of the reasons for vibration when turning on the AC: 1. Carbon buildup on spark plugs: After a period of use, carbon deposits will accumulate on the spark plugs. If not cleaned in time, this can reduce the engine's torque output, leading to vibration when the AC is turned on. Soak the spark plugs in a container with white vinegar for 2-3 hours (or 4-5 hours for severe cases), then use a stiff brush to remove the carbon deposits. Clean them with gasoline and let them air dry naturally. 2. Carbon buildup on the throttle body: When the AC is turned on, the engine load suddenly increases, and the throttle opening expands. At this point, the issue of dirt is magnified. If the throttle is stuck or fails to open to the proper position, the air intake is restricted, reducing engine power and eventually causing engine vibration. 3. Deformed fan or loose screws: Check if the vibration is due to resonance caused by a deformed fan when the AC is turned on or if it's caused by loose screws securing the fan.
7
5
Share

What lights should be turned on when entering a tunnel?

Before entering a two-way traffic tunnel, vehicles should turn on the width marker lights or low beam headlights. High beam headlights should be used inside the tunnel. Precautions for driving into a tunnel are as follows: (1) Slow down and turn on the lights before entering the tunnel. (2) Do not turn on the high beam headlights. (3) Speeding is strictly prohibited. (4) Do not honk the horn inside the tunnel. (5) Do not attempt to repair the vehicle by yourself. Due to poor lighting conditions in the tunnel, in case of a malfunction, evacuate promptly and seek professional assistance instead of attempting self-repairs. (6) Maintain a safe following distance. (7) Do not change lanes. The lighting conditions inside the tunnel, especially at the tunnel exit, are poor, and there are usually only two or three lanes, so lane changing is strictly prohibited inside the tunnel.
6
4
Share

Where is the Wrangler engine serial number located?

You can find it on the nameplate next to the battery under the car's hood. Like the VIN code, the engine number is unique and serves the purpose of ensuring traceability for the engine, allowing tracking in case of issues or manufacturer investigations. Here is additional information: Engine number: The sequence and content of engine numbers vary by manufacturer. Generally, they include the engine model, production date, and a randomly assigned serial number when the engine comes off the production line. Some may also include a place-of-origin code. The number of digits in the engine number differs by brand, with common engine numbers typically ranging between 7 and 8 digits.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.