Where is the Changan Ford Cabin Air Filter Located?

2 Answers
OCorey
07/24/25 4:42am
Changan Ford's cabin air filter is located behind the glove compartment on the front passenger side. Below are detailed introductions about the Changan Ford cabin air filter: 1. Specific functions of the cabin air filter: It separates solid impurities such as dust, pollen, and abrasive particles from the air, and adsorbs harmful substances in the cabin air to provide fresh air inside the vehicle. 2. Distinction: The cabin air filter is used to filter the quality of air entering the cabin from inside or outside the vehicle. The engine air filter, on the other hand, refers to the engine intake system, which filters the air entering the engine's intake pipe. These two filters have different functions. Generally, the replacement cycle for the engine air filter is based on air quality and mileage, while the cabin air filter should be replaced once a year or every 20,000 kilometers.
Was this review help?
14
4
Share
Elisa
08/11/25 12:21am
I've been driving a Changan Ford for three years, and the cabin air filter is usually located behind the glove compartment on the passenger side. The first time I replaced it myself, I was a bit confused. You need to pull open the glove compartment first, then press the small clips on both sides to remove it. After that, you'll see a plastic cover—just unscrew it to take out the old filter and replace it with a new one. The whole process takes about ten minutes. It's recommended to replace it annually or every 20,000 kilometers because if you don't, the air blown by the AC can develop a strange odor, degrade the air quality inside the car, and even trigger sneezing. The placement is quite thoughtful—no need to dismantle the dashboard, making maintenance simple and hassle-free. In dusty environments, be sure to replace it more frequently to ensure healthy breathing.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

How to Replace the Key Battery for Mercedes-Benz C200?

Steps to replace the key battery for Mercedes-Benz C200: 1. Push the small switch with teeth on the tail of the remote to the right, which will pop up a manual key; 2. After pulling out the key, gently insert it into the larger hole at the back of the key slot. Insert it about one centimeter until you touch the latch of the remote battery cover. Gently pry it open, and the cover will come off; 3. Open the cover by hand to see the remote's battery; 4. Press the battery lightly, and it will pop up. Remove it, replace it with a new battery, close the key cover, and reinsert the manual key. In terms of suspension, the front suspension of the Mercedes-Benz C200 is a multi-link independent suspension, and the rear suspension is also a multi-link independent suspension. For safety features, the Mercedes-Benz C200 comes standard with ESP, front side airbags, side curtain airbags, knee airbags, tire pressure monitoring, and more.
4
1
Share

Do I need to restart the inspection if I only completed half of the vehicle inspection and plan to continue it after a few days?

You need to restart the inspection. Introduction to Vehicle Annual Inspection: Vehicle annual inspection (Vehicles inspection), also known as motor vehicle inspection. The inspection items and scope vary depending on the usage nature of the motor vehicle. According to the definition in RB/T218-2017 "Requirements for the Qualification and Assessment of Inspection Bodies - Motor Vehicle Inspection Institutions", motor vehicle inspection includes three categories: motor vehicle safety technical inspection, motor vehicle emission inspection, and comprehensive vehicle performance inspection. Consequences of Not Undergoing Annual Inspection: If a vehicle is found by traffic police on the road without an annual inspection, the owner will be fined or the vehicle will be impounded. At the same time, in insurance contracts, vehicles that have not undergone timely annual inspections are considered unqualified, and no claims will be paid in the event of a car insurance accident.
17
3
Share

Will crossing the line at night be captured?

Crossing the line at night will be captured. As long as there are electronic surveillance cameras, driving over the line at any time will result in being photographed and fined. Detour to avoid emergencies: If an accident or natural disaster affects the road ahead, making it impassable for an extended period and forcing vehicles behind to detour by crossing the line, this will not be treated as a traffic violation. Follow the instructions of traffic police: According to the Road Traffic Safety Law, when traffic signals are malfunctioning and there are traffic police directing on-site, drivers should follow the instructions of the traffic police. Special vehicles performing tasks: If traffic violations such as running a red light or crossing solid lines occur while yielding to special vehicles like fire trucks or ambulances, these actions will not be considered violations. If a penalty notice is issued due to being captured by electronic surveillance, an administrative reconsideration can be requested to revoke the penalty.
3
1
Share

What is the power of the Caterpillar 320d engine?

The power of the Caterpillar 320d engine is 103 kW/2000 horsepower. Engine power: The maximum output power of the engine is 177 kW/241 horsepower, 246 kW/335 horsepower, and 309 kW/420 horsepower respectively. When choosing which engine to equip in this new sedan, the exceptional comfort and power of the Phaeton, as well as the technical potential of the Volkswagen brand, were fully demonstrated. The engines used in the production models are: 3.2-liter V6 engine, output power 177 kW/241 horsepower, maximum torque 315 Nm, equipped with a Tiptronic six-speed manual/automatic transmission; 4.2-liter V8 engine, output power 246 kW/335 horsepower, maximum torque 430 Nm, equipped with a Tiptronic six-speed manual/automatic transmission; the top-level model features a 6-liter W12 engine, output power 309 kW/420 horsepower, maximum torque 550 Nm, equipped with a Tiptronic five-speed manual/automatic transmission.
16
1
Share

Is it normal to have clearance between the upper and lower parts of the crankshaft?

If the clearance is reasonable, it is normal. Otherwise, the high temperature during operation may cause the crankshaft to expand and seize. However, excessive clearance is not acceptable as it will generate significant noise. Introduction to Crankshaft: The crankshaft is the most critical component in an engine. It receives the force transmitted by the connecting rod and converts it into torque, which is then output through the crankshaft to drive other engine accessories. The crankshaft is subjected to the combined effects of centrifugal force from rotating masses, periodically varying gas inertia forces, and reciprocating inertia forces, resulting in bending and torsional loads. Therefore, the crankshaft must have sufficient strength and stiffness, with wear-resistant journal surfaces, uniform operation, and good balance. Crankshaft Structure: To reduce the mass of the crankshaft and the centrifugal force generated during operation, the crankshaft journals are often hollow. Oil holes are drilled on each journal surface to allow the introduction or discharge of oil for lubricating the journal surfaces. To minimize stress concentration, transition arcs are used at the connections between the main journals, crankpins, and crank arms.
10
5
Share

Where is the car air conditioning expansion valve located?

Small car air conditioning expansion valves are generally located at the condenser inlet. Below is relevant information about the air conditioning expansion valve: 1. Thermal expansion valve: Also known as a throttle valve, the thermal expansion valve is one of the four major components in a car air conditioning refrigeration system (evaporator, compressor, condenser, and expansion valve). It senses the superheat of refrigerant vapor at the evaporator outlet to adjust the opening degree of the expansion valve, thereby controlling the flow of liquid refrigerant entering the evaporator. 2. Classification: Thermal expansion valves are divided into internally equalized and externally equalized types based on their balancing method: The working principles of internally equalized and externally equalized expansion valves are basically the same, with the difference being that the diaphragm of an internally equalized valve senses the evaporator inlet pressure. When the pressure drop in the evaporator is too large, it reduces the superheat sensed by the power head, causing insufficient valve opening. In contrast, the diaphragm of an externally equalized valve senses the evaporator outlet pressure, avoiding the influence of evaporator pressure drop on valve opening and overcoming the shortcomings of internally equalized valves.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.