Where is the central locking control box located in the Lechi?

How to Drive a Dual-Clutch Transmission?

Here are the correct methods for starting with a dual-clutch transmission: 1. When starting, make sure to press the brake pedal. Then shift into N (Neutral) to start the engine. After the engine starts, shift into D (Drive), release the brake, and gently press the accelerator for a smooth start. Avoid launch starts. 2. Always shift into N (Neutral) when parking. The principle of a dual-clutch transmission is similar to a manual transmission. When parking, the clutch is not fully disengaged. 3. Frequently use manual mode. Regular use of manual mode allows the transmission to develop a memory effect and operate according to your driving habits. This personalizes the driving experience and helps reduce shift frequency, thereby lowering the probability of malfunctions. Additional Information: Correct parking method for dual-clutch transmission: When parking, first press the brake pedal and wait until the vehicle comes to a complete stop. Then shift into N (Neutral), turn off the engine, and finally shift into P (Park) to complete the parking process.

15

1

Share

How many Chery 4S stores are there nationwide?

There are 500 Chery 4S stores nationwide. Chery Automobile's corporate culture: Sincerity and integrity, everlasting passion. Sincerity and integrity are the foundation of enterprise development, and only with passion can there be enthusiasm for work. Customers first, quality supreme. It is not the company but satisfied customers who provide employees with ideal salaries. Always pioneering, pursuing excellence. Pioneering is always arduous, and only by continuously pioneering can we talk about pursuing 'excellence'. Act immediately, improve daily. Use the strength of a large company and the flexibility of a small company to handle every matter. People-oriented, encouraging competition. First-class products are manufactured by first-class talents. Organizational optimization, team interaction. The exertion of organizational strength depends on the joint efforts of members within the organization, and the mechanism to maintain the exertion of organizational strength requires an optimized system. Beyond dreams, challenge limits. Analysis of Chery's industry competition structure: Competition among existing enterprises, analysis of potential entrants, analysis of substitute threats, supplier bargaining power, customer bargaining power.

14

5

Share

What does BYD DM-i mean?

BYD DM-i refers to BYD's Super Hybrid Technology. The DM-i Super Hybrid system is based on a high-capacity battery and a high-power electric motor. During driving, the vehicle relies on the high-power electric motor for propulsion, while the gasoline engine primarily functions to charge the battery. It directly drives the wheels only when additional power is needed, and even then, it works in tandem with the electric motor to reduce load. Additional Information: 1. Simply put, when a DM-i model has sufficient battery charge, it operates like a pure electric vehicle, with the electric motor providing ample power for various road conditions. When the battery charge is low, the DM-i model autonomously determines whether to use electricity, fuel, or a combination of both based on system conditions. 2. According to data released by BYD, in urban driving conditions, the vehicle uses the electric motor for propulsion 99% of the time, offering a driving experience nearly identical to that of a pure electric vehicle. Additionally, the engine remains off 81% of the time under these conditions. During high-speed driving, both the engine and the electric motor provide power to the wheels, with the engine consistently operating within its most efficient range.

5

4

Share

What is the optimal speed to pass speed bumps without damaging the car?

Vehicles should generally pass speed bumps at around 20 km/h. The classification of speed bumps is as follows: 1. Cement speed bumps: These are relatively higher, allowing vehicles to pass slightly faster. Generally, speeds between 20-30 km/h cause minimal shaking. For larger vehicles, speeds of 30-40 km/h are acceptable. Such speed bumps pose little harm to tires but require consideration of the vehicle's ground clearance. 2. Metal speed bumps: These are usually lower with an inverted V-shape. While they don't harm the chassis, they can damage tires. The recommended speed is around 40 km/h, though slower speeds are better for tire protection. 3. Liquid speed bumps: The slower the better when passing these, with optimal speeds below 10 km/h. 4. Rubber speed bumps: These are primarily taller but don't damage tires. The recommended passing speed is below 40 km/h, which aligns with the speed limit requirements in areas where such bumps are installed.

10

3

Share

What documents are required for the third driving test?

For the third driving test, you only need to bring your ID card. Below is a brief introduction to the third driving test: 1. Basic Information: The third driving test is part of the motor vehicle driver's license assessment, commonly referred to as the road driving skills and safe civilized driving knowledge test. 2. Test Content: (1) Road Driving. The road driving skills test generally includes: preparing to get on the vehicle, simulated lighting test, starting, driving straight, shifting gears, changing lanes, parking by the roadside, driving straight through intersections, turning at intersections, meeting vehicles, overtaking, making U-turns, and driving at night. The test content varies for different types of vehicles. (2) Knowledge Test. The safe civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, and knowledge of handling traffic accidents.

2

0

Share

What does 2.0e Camry mean?

2.0E refers to the Elite version of the Camry. In the Camry's 2.0S, 2.0E, and 2.0G models, the "E" stands for Elite version, "G" stands for Leading version, and "S" stands for Agile version/Sporty version. Here is more information about the Camry: 1. Exterior: The Camry features dual styling designs: Luxury and Sport, both inspired by Toyota's latest "Keen Look" design language. 2. Interior: The cabin uses high-quality materials for soft-touch surfaces and metal trim. For the first time, a three-dimensional surface decoration process (TOM) is applied to the instrument panel and center console trim, creating a visually three-dimensional effect. 3. Powertrain: The Camry is equipped with a new 2.5L Dynamic Force Engine. This new 2.5L Dynamic Force Engine delivers a maximum output of 154 kW and a peak torque of 250 Nm.

9

3

Share

Where is the central locking control box located in the Lechi?

How to Drive a Dual-Clutch Transmission?

How many Chery 4S stores are there nationwide?

What does BYD DM-i mean?

What is the optimal speed to pass speed bumps without damaging the car?

What documents are required for the third driving test?

What does 2.0e Camry mean?

What Are the Benefits of Waxing in Winter?

Is it okay to unplug the charging cable before the new energy vehicle is fully charged?

What is the model number of the Peugeot 307 alternator belt?

Can the Audi A4L be modified with an electric trunk?