Where is the CD player installed in the Volkswagen Touareg?

2 Answers
VonEmersyn
07/24/25 12:48am
The CD player in the Volkswagen Touareg is located in the drawer in front of the passenger seat. There is a yellow clip on it, and you can pull it down. Functions of the CD player buttons: BAND - Radio band, CENTER - Front center (speaker), MODE - Mode selection, LOUD - High volume, SETUP - Settings, MUTE - Mute, TITLE - Title. Precautions for using the CD player: Since the mechanism of the built-in CD player is relatively delicate, the space is small, and the precision is high, improper use can easily cause the CD to get stuck, especially in built-in multi-disc CD players. Of course, with proper use, the CD player is not so prone to getting stuck.
Was this review help?
12
0
Share
Gage
08/10/25 8:28pm
To locate the CD player in the Touareg, having driven many Volkswagen models, I can tell you it's typically installed in the area below the large central display on the dashboard, easily within reach. Specifically, when seated in the driver's seat, look at the center of the instrument panel—there's a small slot designed for inserting CDs, usually with a button to control ejection. If you're driving an older Touareg model from around 2010, the CD player might be positioned above the glove compartment on the passenger side. However, in newer models post-2020, it's often integrated into the multimedia system while maintaining the same location. Remember, the vehicle must be powered on to operate it. The CD slot is ergonomically designed to minimize distraction while driving. On a side note, modern vehicles increasingly favor digital playback, with USB ports offering more convenient music playback options, making the CD player less commonly used despite its presence. During routine maintenance, check for dust around the slot to prevent jamming.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

Does Crystal Coating Liquid Harm Car Paint?

Crystal coating does not harm car paint. Automotive crystal coating provides reliable paint surface sealing technology, offering efficient and long-lasting protection for the car paint, preventing environmental impacts on the paint color. A water droplet experiment showed that after 12 months of use, the car paint surface remained perfectly intact, demonstrating the effectiveness of automotive crystal coating technology. Here are the benefits of automotive crystal coating: 1. Scratch resistance: With a hardness of 6H, compared to the 2H hardness of ordinary car paint, it prevents most minor scratches and has an elastic recovery function, protecting the vehicle from daily minor scratches and reducing paint surface scratches by over 70% compared to regular coatings. When external forces exceed the elastic protection range of the crystal, it usually only leaves scratches on the crystal without damaging the paint surface. 2. Corrosion resistance: The ultra-fine nano-crystal layer isolates the paint surface from the external environment, effectively preventing oxidation and resisting corrosion from bird droppings, insect residue, acid rain, etc. 3. No cracking: It resists UV rays, extreme heat, and cold, with a temperature resistance range of -50°C to 300°C, adapting to a wide range of temperature changes without cracking or peeling.
3
1
Share

What is the tire model of the Envision 28T Elite?

The tire specification for the Envision 28T Elite is 235/50R19. The first number, 235, indicates the tire width is 235MM. The 50 represents the aspect ratio of the tire's cross-section, which is 50%, meaning the height of the cross-section is 50% of the width. The letter R stands for radial tire, and 19 indicates the rim diameter is 19 inches. The Envision 28T Elite has a top speed of 205km/h and accelerates from 0 to 100km/h in 8.4 seconds. In addition to the model, tires also display the following common data: Tire carcass cord material: Represented by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
10
5
Share

Why is there a 10-day rule for driving test appointments?

It takes 10 days to schedule an exam to allow students to calm down during this short period of time, consolidate these test items, and deepen their impressions. At the same time, because there are too many people applying for an exam, the number of places is limited. The following is extended information: 1. Formulation and announcement of the examination plan: Relevant departments should formulate and review the examination plans for each subject of the driving test at least 10 days before the announcement, and the announced examination plan should not be less than 5 days. 2. Notes: a. Self-appointment means that candidates freely choose the examination venue and time in the examination plan; system appointment is automatically selected by the system. b. Except for the subject one exam, when scheduling other subject exams, you need to evaluate the previous exam before continuing to schedule. c. After the appointment application is submitted, the system will notify the student by SMS 3 days in advance whether the appointment is successful, and the student can also log in to the appointment platform to directly check. d. When registering information, ensure that the mobile phone number and ID number are filled in correctly. e. Do not cancel easily after a successful appointment, otherwise it will affect the success rate and examination time of the next appointment.
20
3
Share

What to Bring for the First Maintenance?

Items required for the first maintenance include: driver's license; maintenance manual; vehicle registration book; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice, to be taken to the designated first maintenance facility for the vehicle's initial service. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven, with the specific time varying by vehicle, generally after driving 1,000 to 3,000 kilometers. It is essential to attend the first maintenance promptly, neither in advance nor delayed. The completion of the first maintenance signifies the end of the vehicle's break-in period, allowing it to be driven under standard load and normal speed as required by the car. The timing for the first maintenance is calculated from the date of vehicle pickup. There are two indicator values for the first maintenance: mileage and time. Whichever condition is met first will be the standard. The first maintenance items include: oil change, oil filter replacement, cleaning the air filter, checking various fluid levels for normalcy, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and examining tires for damage or bulges. Time required: Completing all tasks takes approximately 2 hours. The most crucial part of the first maintenance for a new car is changing the oil and oil filter. When changing the oil, the oil filter must also be replaced simultaneously. The choice of oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars themselves during holidays, using water to wash the body and wiping it with a cloth. Here, it is important to note that the interior of the car body should not be directly rinsed with water. If the floor mats are dirty, they can be vacuumed or taken out, scrubbed with a brush and detergent, dried, and then placed back. There are many drainage holes under the rubber mats on the floor of the driver's compartment. If water enters, it will not dry but flow through the holes to areas like the gearbox, causing erosion and corrosion. The better approach is to use a vacuum cleaner for cleaning, followed by wiping with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the antifreeze in the car is low, it is recommended to drain the antifreeze and add the same brand from the beginning. Since antifreeze brands differ, their chemical properties vary significantly. Different types of corrosion inhibitors can corrode each other. Different brands of antifreeze use different corrosion inhibitors, so they should not be mixed to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function properly again. To prevent rust on wheel bolts and nuts, some people apply lubricant, which can pose a safety risk. At high speeds, bolts and nuts can loosen or even fall off, leading to driving malfunctions. Do not press the accelerator when starting an EFI car: The starter of an EFI (Electronic Fuel Injection) car differs from that of a conventional car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring smooth starting.
2
0
Share

How to Reset the Maintenance Reminder Light on a Peugeot 308?

Here are the steps to reset the maintenance light on a Peugeot 308: 1. Turn off the ignition. 2. Press and hold the trip meter reset button on the instrument panel. 3. Turn on the ignition (while still holding the button from step 2). 4. The odometer will start counting down. When the display shows 0000.0, release the button. The wrench indicator light on the instrument panel should then turn off. Here are the exterior features of the Peugeot 308: 1. The first models released were the 5-door standard version, followed by the 3-door version. 2. The total length of 4.27 meters is 6 cm longer than the 307 and 8 cm longer than the Golf 5. 3. The wheelbase of 2.61 meters is also longer than the 307, with a width and height of 1.81 meters and 1.49 meters respectively. 4. The front overhang is increased by 30mm, and the rear overhang by 16mm. 5. The front grille comes in various styles, which can be divided into sporty and classic types. 6. The Peugeot 308's design draws heavily from the style of the 207.
7
0
Share

Is there a big difference in power between the Sagitar 1.2 and 1.4?

The only difference between the Sagitar 1.2T and 1.4T engines is their performance. The 1.2T has a maximum horsepower of 116 hp and a maximum torque of 250 Nm, while the 1.4T has a maximum horsepower of 150 hp and a maximum torque of 250 Nm, showing a very noticeable gap. Apart from performance differences, there are no distinctions in other aspects such as dimensions or wheelbase. Below are some relevant details about the Sagitar: 1. The Sagitar's body dimensions are 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. 2. The Sagitar is equipped with two engines: a 1.2-liter turbocharged engine and a 1.4-liter turbocharged engine. Both engines feature direct fuel injection technology, use aluminum alloy cylinder heads and blocks, and are paired with a 7-speed dual-clutch transmission. 3. The Sagitar's front suspension uses a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.