Where is the car temperature control switch located?

What was the price per kilogram of waste engine oil in 2021?

One liter of engine oil weighs approximately 0.85-0.93 kilograms. Engine oil, also known as motor lubricant, serves multiple functions such as lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the 'blood' of a car. Related introduction: The engine is the heart of a car, containing many metal surfaces that move against each other. These components operate at high speeds under poor conditions, with working temperatures reaching 400°C to 600°C. Advanced technology can convert natural gas into crystal-clear fully synthetic base oil, which is then enhanced with unique power cleaning technology to create lubricants with superior cleaning and protective performance. Under such harsh operating conditions, only qualified lubricants can reduce engine component wear and extend service life. In the market, engine oils are broadly categorized into mineral oils and synthetic oils based on their base oil composition. Synthetic oils are further divided into fully synthetic and semi-synthetic. Lubricant base oils are primarily classified into two major types: mineral base oils and synthetic base oils.

1

2

Share

How big is a 2.6 cubic meter van?

2.6 cubic meter van dimensions are 1.8m x 1.3m x 1.1m. Additional information: Van classifications: Microvans: 6 to 8-seater vans are the most common type, used for general passenger or cargo transport, requiring only a C1 driver's license. Light buses: 9 to 12 seats. According to traffic regulations, student shuttles must be vehicles with 9 seats or more, so they are often used as student shuttles, travel buses, or commercial vehicles. These vans require a B1 driver's license to operate. Medium buses: These 13+ seater vehicles are more specialized, as their functionality somewhat resembles passenger cars, capable of transporting more passengers or cargo. Additionally, they can be converted into RVs. Huolala small trucks (load capacity 500kg, dimensions 1.8x1.3x1.1m, cargo volume 2.6 cubic meters) are generally suitable for transporting small items as long as they do not exceed the load capacity and volume limits.

9

4

Share

What does a vehicle inspected every 2 years need to do annually?

A vehicle inspected every 2 years only needs to be driven normally, pay attention to traffic violations, and undergo regular maintenance, without requiring any special actions. Required documents for biennial vehicle inspection: owner's ID card (if handled by an agent, the agent's ID card is required), original and duplicate pages of the vehicle license, duplicate of compulsory traffic insurance, and the vehicle and vessel tax invoice for the year of inspection. Below are the precautions for vehicles that have not undergone inspection: Accident liability: For all traffic accidents caused by vehicles that have not participated in the inspection on time, the party involved will bear full or primary responsibility, and the insurance company will not bear any responsibility. This is because the insurance policy specifies that objects of refusal to compensate include vehicles with expired inspection. Mandatory scrapping: According to the "Regulations on the Mandatory Scrapping Standards for Motor Vehicles", if a motor vehicle fails to obtain a qualified inspection mark within 3 consecutive inspection periods after the expiration of the inspection validity period, it will be mandatorily scrapped.

11

2

Share

At What Tire Pressure Will a Tire Burst?

The tire pressure for passenger car tires generally ranges between 2.3 2.8 BAR, and as long as it stays within this range, it is considered safe. However, during summer when temperatures are high, the tire pressure, which was initially within the normal range, may actually rise above 3.0 BAR after driving. Therefore, in summer, it is advisable to maintain a slightly lower tire pressure within the normal range, with 2.3 2.5 BAR being more appropriate. The hazards of excessively high or low tire pressure are as follows: 1. Excessive tire pressure: Reduces the contact area between the tire and the ground, significantly increasing the pressure and wear per unit area. This can easily lead to loss of braking control, tire bursts when encountering road protrusions or depressions, damage to the vehicle's suspension system, and an uncomfortable ride. 2. Insufficient tire pressure: Increases the contact area between the tire and the ground, causing abnormal rises in tire temperature during driving. Additionally, severe deformation of the tire sidewall accelerates the aging of internal steel wires and fabric layers, thereby creating a hidden risk for tire bursts. It also increases fuel consumption and reduces tire lifespan.

1

Share

Does pressing the accelerator deeper make the car go faster?

Pressing the accelerator deeper does make the car go faster. Here is some relevant information about the accelerator: Introduction: The faster you press the accelerator, the higher the engine speed (how many revolutions the engine makes per minute) becomes. However, engine speed is related to multiple factors. Automotive design engineers specify the rated speed (i.e., normal operating speed) and the maximum speed (the fastest speed the engine can achieve when pushed to its limit) during the design phase. Note: At the same engine speed and in the same gear, the car will go faster if it is unloaded (lower total weight) and slower if it is fully loaded (higher total weight). At the same engine speed, higher gears (e.g., 4th gear) result in faster speeds, while lower gears (e.g., 1st gear) result in slower speeds. Therefore, generally speaking, when the accelerator is pressed all the way down, the engine speed will reach its highest (but not exceed the designed maximum speed), and the car speed will also increase, potentially reaching the maximum speed. However, whether the maximum speed is achieved depends on factors such as the gear, vehicle load (total weight of the car), and road conditions (uphill, flat, or downhill).

9

4

Share

Is Mold on Car Tires a Serious Issue?

Tires affected by mold may exhibit surface cracking, stickiness, hardening, softening, powdering, discoloration, and mold growth, which can compromise their appearance. Additionally, mold on tires produces Penicillium and Streptomyces bacteria, whose invasion accelerates tire aging, increasing the risk of blowouts and potentially leading to traffic accidents that endanger lives. Below are the causes of tire mold and preventive measures: Causes of Tire Mold: The primary components of tires include rubber, carbon black, steel wires, zinc sulfur oxide, and desulfurization agents, among others. Among these, rubber, as the main constituent in tire manufacturing, is the key factor leading to tire mold. Measures to Remove Tire Mold: If mold has already appeared on tires and is affecting warehouse walls and shelves, evenly spray AEM5700B (a small amount in other passageways) from the ground up to a height of 3 meters. After spraying, close doors and windows for at least 12 hours. For stubborn, localized mold stains that cannot be cleaned, use a cotton cloth dipped in AEM5700B to wipe them clean.

10

1

Share

Where is the car temperature control switch located?

What was the price per kilogram of waste engine oil in 2021?

How big is a 2.6 cubic meter van?

What does a vehicle inspected every 2 years need to do annually?

At What Tire Pressure Will a Tire Burst?

Does pressing the accelerator deeper make the car go faster?

Is Mold on Car Tires a Serious Issue?

How to adjust the bass and treble of the GAC GA4 audio system?

Is There No Insurance Label for 2021 Auto Insurance?

Where to Add Windshield Washer Fluid in the Lamando?

What is the structure of a fuel tank?