Where is the car's spark plug located?

1 Answers
GenevieveLee
07/29/25 5:44am
The spark plug in a car is generally located inside the engine cylinder. It can be clearly seen after removing the high-voltage ignition coil. Spark plug replacement procedure: Open the hood, lift the engine's plastic cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check for external debris such as leaves or dust and ensure thorough cleaning. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the firing order, then secure the cover. Spark plug replacement interval: Under normal maintenance conditions, replacement is recommended every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the owner's manual. Platinum spark plugs should be replaced at 40,000 km, standard nickel alloy spark plugs at 20,000 km, and iridium spark plugs between 60,000-80,000 km.
Was this review help?
8
1
Share
More Forum Discussions

Is the Haval F7 a four-wheel drive vehicle?

The Haval F7 offers a four-wheel drive version, which is equipped with an on-demand four-wheel drive system. This system can automatically identify driving conditions and switch between two-wheel drive and four-wheel drive modes based on changes in the driving environment. On rough, hilly, or winding roads with low traction, the vehicle automatically sets to four-wheel drive mode. On flatter urban roads, it switches back to two-wheel drive. The Haval F7 is powered by two engine options: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine, both paired with a 7-speed dual-clutch transmission. The front suspension uses a MacPherson independent suspension, while the rear suspension features a double-wishbone independent suspension.
7
3
Share

What Causes the Abnormal Noise from Car Window Glass?

Abnormal noise from car window glass can be attributed to the following reasons: 1. The window regulator is not tightly fitted to the door; 2. The vehicle's sealing strip has aged; 3. There are debris on the glass surface; 4. The door's velvet strip has aged. Taking the example of the window regulator not being tightly fitted to the door, although the window appears to be fully raised, the glass is not completely sealed. Even slight bumps on the road can cause abnormal noises. In this case, the door panel needs to be removed to re-tighten the regulator screws. While abnormal noises from car glass during driving do not affect the vehicle's safety, they can indirectly increase driving hazards. It is recommended that car owners promptly inspect and address the issue.
2
5
Share

Does Emergency Braking Cause Significant Damage to Vehicles?

Emergency braking causes substantial damage to vehicles. It wears out brake pads and increases fuel consumption. Damage to brake pads from emergency braking: It significantly impacts the braking system. Emergency braking also accelerates tire wear, reducing tire lifespan. Sudden acceleration places an abrupt load on the vehicle, increasing strain on the engine and transmission, which can damage these systems and affect engine longevity. Emergency braking harms the engine, transmission, and braking components, shortening their service life. This is similar to how sudden strenuous running can harm various organs in the human body. Increased fuel consumption: The braking system suffers considerable wear, requiring earlier replacement of brake discs and pads. The clutch system's lifespan is also reduced, and components like brake calipers and master cylinders deteriorate more rapidly.
1
0
Share

What is the maintenance cycle for the Haval H2S?

The maintenance cycle for the Haval H2S: minor maintenance is recommended every 5,000 kilometers or approximately every six months, while major maintenance is suggested every 10,000 kilometers or around one year. The actual maintenance cycle for the Haval H2S may vary depending on the frequency of use and the condition of the vehicle. For specific details, it is advisable to consult the staff at your local 4S store. In terms of exterior design, the Haval H2S has undergone adjustments primarily to the front bumper. The blue-label version features a larger design for the fog light position, complemented by chrome trim accents. The hexagonal grille has been updated to a five-horizontal-slat design. Additionally, except for the manual Fengshang model, the other four variants are equipped with a panoramic sunroof.
4
3
Share

Where is the engine of the Haval F7 produced?

The engine of the Haval F7 is independently developed by Haval Motors. The turbocharged engine used in this vehicle is also one of the main engines promoted by Haval Motors. In terms of power, this car offers two powertrain options, equipped with 1.5T and 2.0T turbocharged engines respectively. The 1.5T engine delivers a maximum power of 124 kW and a peak torque of 285 Nm, while the 2.0T engine produces a maximum power of 165 kW and a peak torque of 385 Nm. The transmission system paired with these engines is a 7-speed dual-clutch gearbox. The Haval F7 is a model from Haval's F series, featuring a circular smart cockpit design in its interior. It introduces a new gray-black interior option to meet diverse customer needs, with a distinctive 'F' logo on the seat backs for enhanced recognition and exclusivity.
13
0
Share

Which Cars Use 15w50 Engine Oil?

Household cars use 15w50 engine oil. In 15w50, 15 represents the minimum applicable temperature of the oil at -20 degrees Celsius, W stands for Winter, and 50 indicates the high-temperature viscosity of the oil, with a kinematic viscosity of 19cst when the engine is at 100 degrees Celsius. This type of oil is suitable for both winter and summer use, and its quality is also guaranteed. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, dampen shocks, and resist wear in the engine. Engine oil consists of two parts: base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while additives compensate for and improve the shortcomings of the base oil, imparting certain new properties.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.