Where is the car's carbon canister located?

2 Answers
VonLane
07/29/25 3:18am
The location of the carbon canister varies by vehicle model. Here are methods to determine its position: 1. There are generally three pipes on the fuel tank. The fuel supply pipe and return pipe for the engine are engine-related. Follow the remaining pipe to locate the carbon canister. 2. Trace the pipe connected behind the throttle body. Sometimes the solenoid valve assembly is integrated with the carbon canister, in which case you'll find a small rectangular box on the plastic housing - this is the carbon canister. Additional information about the carbon canister: 1. The carbon canister is actually part of the Evaporative Emission Control System (EVAP), which was introduced to prevent fuel vapor from escaping into the atmosphere after the engine stops running. The collection and storage of gasoline vapors is primarily handled by the carbon canister. 2. Its housing is typically made of plastic, filled internally with activated charcoal particles that can adsorb vapors. The top is equipped with a purge control valve to regulate the amount of gasoline vapor and air entering the intake manifold, along with a filter screen to purify gasoline vapors.
Was this review help?
5
2
Share
LeEva
08/12/25 7:10am
Every time I perform maintenance, I check the location of the charcoal canister. It's on the car's chassis near the fuel tank, resembling a small black box. Some car designs place it on the frame rails beside the fuel tank, while other models position it in front of the rear axle. To locate it, you need to lift the car to view the undercarriage or remove the rear wheel inner liner to spot it. The charcoal canister is connected to three tubes, leading to the fuel tank, engine intake manifold, and the atmosphere, respectively. It's placed near the fuel tank to collect fuel vapors but must avoid high-temperature areas like the exhaust pipe to prevent safety hazards. The undercarriage location requires protection against flying stones during driving or water corrosion, so the charcoal canister housing is made of engineering plastic. Regular checks for blockages are crucial.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

What are the symptoms of insufficient fuel pump pressure in a Mazda6?

The symptoms of insufficient fuel pump pressure in a Mazda6 are: 1. Weak vehicle acceleration with noticeable hesitation during sudden acceleration; 2. Difficulty starting the vehicle; 3. Abnormal noises from the fuel pump; 4. Constant illumination of the engine warning light on the instrument cluster. The Mazda6 has a body size of 4670mm in length, 1780mm in width, and 1435mm in height, with a wheelbase of 2675mm and a minimum ground clearance of 150mm. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 108kW and a maximum torque of 183Nm, paired with a 6-speed manual transmission. The front suspension features a double-wishbone independent suspension with a stabilizer bar.
8
3
Share

Where is the fuel tank cap switch on the Corolla?

Corolla fuel tank cap switch is located at the bottom left side of the driver's seat. Lift the fuel tank switch to open the fuel tank cap. The Corolla is a compact car with body dimensions of 4635mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm, ground clearance of 152mm, and a fuel tank capacity of 50 liters. The Corolla is equipped with a 1.2L inline 4-cylinder turbocharged engine, delivering a maximum power of 85kW at 5200-5600rpm and a maximum torque of 185Nm at 1500-4000rpm.
8
1
Share

What are the standard dimensions of a parking space?

According to the "Urban Road On-Street Parking Space Setting Standards," the standard size of a general parking space is determined based on the size of the vehicle. Small parking spaces typically measure 2.5~2.7 meters in width and 5~6 meters in length. The width of a single-lane turnaround should be no less than 3.5 meters, while a double-lane turnaround should be no less than 5 meters. The turnaround section should accommodate a vehicle's one-time turnaround, and for safety or to accommodate medium-to-large vehicles, it is often set to 6 meters or more. Details are as follows: (Length ≤ 6m, width ≤ 1.8m): The spacing between vehicles should be no less than 0.5 meters, and the spacing between a vehicle and a wall or the end of the parking space should also be no less than 0.5 meters. (6m < length ≤ 8m, 1.8m < width ≤ 2.2m): The spacing between vehicles should be no less than 0.7 meters. Small vehicle parking space: Length ≥ 5 meters, width 2.2~2.5 meters. Large vehicle parking space: Length 7~10 meters, width 4 meters, depending on the vehicle type. According to the "Architectural Design Standards for Parking Garages," the dimensions for small vehicle indoor parking spaces are as follows: The design dimensions for small vehicles are 4.8m (length) x 1.8m (width) x 2.0m (height). For perpendicular parking, the minimum parking space size should be 5.3m (length) x 2.4m (width), with a minimum driveway width of 5.5m in front of the parking space. The minimum distance between a small vehicle and the side walls should be 0.6m, and the minimum distance from the front and rear walls should be 0.5m. Modern underground parking garages have large floor areas and numerous parking spaces. To ensure smooth vehicle movement, driveways are planned to be relatively wide. Driveways, as horizontal passages dedicated to parking spaces, account for a significant portion of the allocated floor area, often 50% or more of the total parking space area. Parking space arrangements can be categorized into three types: parallel, angled (30°, 45°, or 60°), and perpendicular. Large vehicle parking spaces should not use angled or perpendicular arrangements. Details are as follows: Parallel parking space: Standard length is 6 meters, width is 2.5 meters. Angled parking space: Diagonal length should be 6 meters, width 2.8 meters, with a perpendicular distance of 2.5 meters between the two diagonal lines. Perpendicular parking space: Length ≥ 5 meters (typically 6 meters), width 2.5 meters. The optimal standard size is 2.5m x 5.3m. Article 33, Paragraph 2 of the "Road Traffic Safety Law of the People's Republic of China" states: Within urban road areas, government authorities may designate parking spaces without obstructing pedestrian or vehicle traffic. Article 34: Roads in front of schools, kindergartens, hospitals, and nursing homes without pedestrian crossing facilities must have crosswalks marked and warning signs installed. Sidewalks on major urban roads should include tactile paving as per planning, complying with national standards. Article 56: Motor vehicles must park in designated areas. Parking on sidewalks is prohibited, except in spaces marked under Article 33. Temporary parking must not obstruct other vehicles or pedestrians. Article 63: Parking is prohibited in areas with no-parking signs or markings. Additionally, on-street parking spaces must not have ground locks to prevent private occupation. Roads prohibiting parking on one side may have barriers, posts, or bollards installed. After removal or cancellation of parking spaces, markings and related facilities must be promptly cleared to prevent unauthorized parking and ensure road safety. Off-street public parking lots should not have on-street parking spaces within 200m~300m. Quantitative regulations for on-street parking spaces: The "Urban Road On-Street Parking Space Setting Standards" specify road width requirements. For two-way roads: if the actual width exceeds 12 meters, parking spaces may be set on both sides; between 12m and 8m, on one side; below 8m, none. For one-way roads: if the actual width exceeds 9 meters, parking spaces may be set on both sides; between 9m and 6m, on one side; below 6m, none. For disabled parking spaces, at least 2% of total spaces must be designated, with a minimum of one space if there are 20 or more total spaces. Parking space marking colors: White: Paid parking spaces. Blue: Free parking spaces. Yellow: Reserved parking spaces. Time-limited parking spaces: Dotted border.
5
0
Share

Is the Shadow Leopard Front-Wheel Drive or Rear-Wheel Drive?

The Shadow Leopard adopts a front-engine, front-wheel-drive layout. The vehicle features a MacPherson strut independent front suspension and a multi-link independent rear suspension. Exterior Introduction: In terms of exterior design, the GAC Trumpchi Shadow Leopard employs the "Light Sculpture Surface" design language, offering two exterior styles: Sport and Luxury. The body dimensions are 4700mm*1850mm*1432mm. Specifically, the Sport version features a large hexagonal front grille with a vertical waterfall-style design. The grille also incorporates two blue polygonal decorative elements resembling fighter jet air intakes, accented with carbon-fiber-like materials. Configuration Parameters: The Shadow Leopard is powered by the all-new third-generation 1.5TGDI engine from the Julang Power series, delivering a maximum power of 130kW and peak torque of 270N·m. With GCCS technology at its core, it integrates dual-flow turbocharging, top-mounted water-cooled intercooler, high-pressure injection, large-inertia balance shaft, intelligent thermal management, and low-friction technology, achieving a fuel consumption as low as 5.7L/100km. The transmission boasts an efficiency of up to 96%, with a shift time of just 0.2 seconds. In the 0-100km/h acceleration test, it recorded a fastest time of 6.95 seconds.
4
1
Share

How long is the transmission warranty for the Passat?

The transmission warranty for the Passat is 3 years or 100,000 kilometers. The transmission is a crucial component of the vehicle, and its function is to change the transmission ratio, expanding the torque and speed of the drive wheels. The Passat is a mid-size car from SAIC Volkswagen. Taking the 2021 Passat as an example, its body dimensions are: length 4933mm, width 1836mm, height 1469mm, with a wheelbase of 2871mm and a fuel tank capacity of 68.5 liters. The 2021 Passat is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm. It uses a McPherson independent suspension at the front and a multi-link independent suspension at the rear.
4
0
Share

How to reset the maintenance reminder on a Chery vehicle?

The method to reset the maintenance reminder on a Chery vehicle is as follows: 1. Insert the key and press the small button on the right side of the dashboard; 2. Turn the key to the "on" position without starting the engine; 3. Hold the small button for a few seconds and then release it; 4. Press and hold the small button again, gently turn it to the right, and then release to reset the maintenance reminder. Chery's vehicle lineup includes models such as the Tiggo 8, Tiggo 3x, Arrizo 5e, Tiggo 3xe, and Big Ant. Taking the Tiggo 8 as an example, it is a mid-size 5-door, 5-seat SUV with body dimensions of 4700mm in length, 1860mm in width, 1746mm in height, and a wheelbase of 2710mm.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.