Where is the car keyhole located?

1 Answers
Joshua
07/30/25 2:09am
The car keyhole is located on the driver's side door handle. The functions of the car key include: 1. After the vehicle is turned off, long-press the lock button on the remote key to close the windows; 2. The red horn-shaped button on the key serves both as a vehicle locator and an emergency function; 3. It has an automatic trunk-opening feature. The principle of the car key: The owner emits a weak radio wave, which is received by the car's antenna. The electronic control unit (ECU) identifies the signal code, and the system's actuator motor or electromagnetic coil performs the locking or unlocking action. The method to replace the car key battery is: 1. Use a flat-head screwdriver to pry open the key casing; 2. Remove the battery from the circuit board; 3. Replace it with a new battery and close the casing.
Was this review help?
18
1
Share
More Forum Discussions

What are the causes of engine acceleration weakness?

Engine acceleration weakness may be caused by: 1. Poor fuel quality; 2. Cracked engine intake pipe; 3. Incorrect ignition timing; 4. Fuel injection system malfunction; 5. Throttle position sensor failure; 6. Three-way catalytic converter failure; 7. Spark plug malfunction; 8. Slow response from transmission computer. Solutions for weak car acceleration include: 1. Replace engine intake pipe; 2. Adjust ignition timing; 3. Replace fuel injection system; 4. Replace throttle position sensor; 5. Inspect three-way catalytic converter; 6. Use higher-grade fuel; 7. Replace spark plugs; 8. Replace transmission computer.
16
4
Share

What is the battery model for the Mercedes-Benz C-Class key?

The battery model is CR2032. It is a lithium manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery is cylindrical in shape, with F used instead if it is square; 20 indicates the battery diameter is 20mm; 32 indicates the battery height is 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is approximately 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is low or quality control is poor, its lifespan will be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture interference, etc.), the lifespan can be extended further, up to 8 or even 10 years. The usage time of a car remote key battery is closely related to the frequency of use—the more frequently it is used, the shorter the lifespan. If the remote key battery runs out, the mechanical key can be used directly to unlock and start the vehicle. Car remote keys use button batteries, mainly in the following models: CR2016, CR2025, CR2032, and CR2450. For the specific model used in each key, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: This is one of the most commonly used car remote batteries. The battery voltage is 3V, while most car keys operate on 9V, so three batteries need to be replaced each time. Examples include Honda, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter is 20mm, thickness is 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016, but it is still used in some car keys. It is thicker than CR2016 but has a relatively higher storage capacity. CR2025 specifications: battery diameter is 20mm, thickness is 2.5mm. This type of battery is also commonly used in audio remotes. Button-type CR2032 battery: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode is metallic lithium, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are dimethoxyethane, propylene carbonate, and lithium perchlorate. Its shape resembles a button, hence the name button lithium battery or lithium-manganese button battery. Button-type CR2450 battery: Compared to the other three models, it is thicker and larger, with a diameter of 24.5mm and a height of 5.0mm. The rated current value for CR2450 is 0.2mA, mainly used in low-power electronic products. Generally, such batteries can provide an output current of 0.001mA to 5mA, with a continuous output current of up to 15mA and a burst output current of up to 30mA, meeting the requirements of most small electronic products for light, sound, and RF output.
14
5
Share

How to Match Gears and Speeds Correctly?

Methods for matching gears and speeds: 1. First gear (0-15 km/h): Used for vehicle start-up or climbing slopes, not suitable for prolonged use; 2. Second gear (15-25 km/h): Appropriate for turning corners or driving under special weather conditions; 3. Third gear (25-35 km/h): Suitable for passing intersections or driving on roads with gentle slopes; 4. Fourth gear (35-40 km/h): Represents normal driving speed, ideal for traffic-heavy conditions; 5. Fifth gear: Applicable for speeds above 40 km/h, typically used as standard cruising speed. On well-paved roads, vehicle speed can be increased by pressing the accelerator.
19
4
Share

What type of suspension does the Dacheng e20 use?

The Dacheng e20 uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. The suspension refers to all the force-transmitting connection devices between the car's frame and the axle or wheels. Taking the 2019 Dacheng e20 as an example, its body dimensions are: length 2871mm, width 1563mm, height 1568mm, wheelbase 1765mm, and curb weight 912kg. The 2019 Dacheng e20 features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a permanent magnet synchronous motor, delivering a maximum power of 35kW and a maximum torque of 125Nm, paired with a single-speed fixed gear ratio transmission.
11
1
Share

Where is the air conditioning filter of Trumpchi GS5 located?

The air conditioning filter of Trumpchi GS5 is located in the engine compartment, right in front of the battery. The functions of the air conditioning filter are: 1. To provide fresh air; 2. To absorb harmful substances; 3. To filter solid impurities. Taking the 2021 GAC Trumpchi GS5 as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4695mm, width 1885mm, height 1726mm, wheelbase 2710mm, and fuel tank capacity 55l. The 2021 GAC Trumpchi GS5 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 169PS, maximum power of 124kW, maximum torque of 265Nm, and is paired with a 6-speed automatic transmission.
13
3
Share

What are the differences between the Trumpchi GS7 and GS8?

The differences between the Trumpchi GS7 and GS8 are: 1. Different engines: The Trumpchi GS7 is equipped with a total of three engines; the GS8 is equipped with two engines. 2. Different body suspensions: The front and rear suspensions of the Trumpchi GS7 both use MacPherson independent suspensions; the front suspension of the GS8 uses a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension. 3. Different body dimensions: The length, width, and height of the Trumpchi GS7 are 4730mm, 1910mm, and 1770mm respectively, with a wheelbase of 2720mm; the length, width, and height of the GS8 are 4810mm, 1910mm, and 1770mm respectively, with a wheelbase of 2800mm.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.