···
Log in / Register

Where is the car GPS usually installed?

3 Answers
Denise
08/26/25 4:36am
Car GPS is usually installed in: 1. The A-pillar, B-pillar, or C-pillar of the vehicle; 2. Inside the engine compartment; 3. Around the dashboard; 4. Under the car seat; 5. Inside the trunk; 6. Hidden under the decorative panel of the front windshield; 7. Under the decorative panel of the rear windshield; 8. Inside the front bumper (waterproofing should be noted). GPS installation tips: 1. To avoid theft and damage, the device should be placed in a concealed location; 2. Avoid placing it near emission sources, such as wireless reversing radar, anti-theft devices, and other vehicle communication equipment; 3. It can be fixed with cable ties or strong double-sided foam tape; 4. The device contains GSM and GPS antennas, so ensure the front side faces upward during installation.
Was this review help?
17
1
Share
ConnorLynn
09/08/25 6:05am
I've been driving for almost twenty years, and car GPS devices are usually installed below the windshield or near the center console, secured with suction cups or directly integrated into the infotainment system. My own car has one mounted at the lower right corner of the front windshield—close enough for the driver to see but not obstructing the view. A quick glance at the navigation map while driving is very convenient. However, it's important to choose a well-ventilated spot to prevent the device from overheating and getting damaged in the summer heat. I once saw a friend place it in the center of the dashboard, and the screen ended up getting fried. Also, avoid positioning it too high or too low; ensure it's at eye level for easy visibility to minimize distraction risks. Road safety comes first—if the GPS falls off on a bumpy road, it can be a real hassle, so I regularly check if the suction cup is secure. In short, a good installation spot makes navigation more efficient, especially on unfamiliar routes.
Was this review help?
9
1
Share
Expand All
LilaMarie
10/22/25 6:09am
As a new driver who just got my license, when I first started learning to drive, I explored the installation positions for the car GPS. It's usually mounted on the dashboard or the upper part of the windshield. I tried sticking it right in the center of the windshield - the high position provided a clear view of the navigation, but it blocked my view of the road ahead while driving, which made me nervous. Later, I moved it to the right side near the passenger seat for easier adjustment. When choosing a position, you need to consider whether the power cord is long enough - if it's too low, you might need to bend over to operate it, which can be distracting. I also learned to check signal strength and avoid placing it where metal frames might block GPS accuracy. My beginner experience taught me that finding the right position can significantly improve driving experience and prevent getting lost.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What is the maintenance interval for the Roewe i5?

The Roewe i5 requires its first minor maintenance at 3,000 kilometers, which is provided free of charge. The second maintenance is due at 13,000 kilometers. Thereafter, maintenance should be performed every 10,000 kilometers, alternating between minor and major services. Below is additional information about vehicle maintenance: 1. Overview: Vehicle maintenance, also known as vehicle servicing, refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. 2. Purpose: To maintain a clean appearance, ensure normal technical conditions, eliminate potential hazards, prevent faults, and extend the service life. 3. Types: Regular maintenance is categorized into three aspects: body maintenance, interior maintenance, and body refurbishment.
20
0
Share

How to Solve the Problem of Unsmoothed Window Lifting?

Solutions for unsmoothed window lifting: 1. Lower the glass to the bottom and spray dashboard wax into the rubber strips on both sides of the glass; 2. Lift and lower the glass several times, and you will notice a reduction in sticking or unsmooth movement (if there is noise, the noise will also decrease); 3. Lower the glass to the bottom again and spray dashboard wax into the rubber strips on both sides of the glass; 4. Repeat step 2 until the car window lifts without sticking, unsmooth movement, or noise; 5. Use a car towel (microfiber cleaning cloth) to wipe off excess dashboard wax from the rubber strip edges of the car window. It is recommended that car owners regularly maintain the rubber components of the vehicle, including door seals, window seals, engine compartment seals, wiper blades, and trunk seals. Spray a specialized rubber protectant on the rubber strips and then wipe it off. This not only forms a protective film on the rubber surface but also improves the rubber's flexibility.
7
5
Share

Where is the engine nameplate located on the Geely Binyue?

The engine number of the Binyue is located on the lower right side of the engine block. Relevant information is as follows: 1. Displacement: The Binyue comes with 2 displacement options: 1.0T and 1.5T, and offers 2 transmission choices: dual-clutch and manual. The engine has a maximum power of 130.0kW, maximum horsepower of 177PS, and maximum torque of 255.0N.m. 2. Engine number: The engine model number is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It is used to represent information such as the manufacturer, specifications, performance, features, technology, purpose, and product batch of the engine.
7
1
Share

What is the troubleshooting for Wuling fault code P0016?

Wuling fault code P0016 troubleshooting generally refers to a fault with the crankshaft or camshaft position sensor, often caused by issues with the sensor itself or its circuit. Below are the specific steps for clearing the fault code: 1. Correct operation: It is essential to strictly follow the designated fault code clearing method specified for the particular vehicle model. Under no circumstances should the method of disconnecting the battery negative ground cable be used casually to clear the fault code. 2. Abnormal situations: Failure to follow the correct operation method may cause the control center computer of some vehicle models to lose normal records. Many vehicle models' onboard computers have an automatic memory function. If the battery negative ground cable is removed carelessly, it will automatically clear the engine operation experience data stored in the random access memory (RAM). Moreover, it may result in the loss of normal functions.
4
3
Share

What car is represented by three vertical bars?

Three vertical bars represent the Hyundai Veloster. Here is some information about the Veloster: 1. Exterior: In terms of length, it is comparable to a compact car, while its height clearly reflects its sports car characteristics. The overall appearance is very avant-garde. The layered design of the front end, with its rich lines, gives it a strong visual impact, complemented by sharp eagle-eye headlights and fog lights. The most distinctive feature of the Hyundai Veloster is its asymmetric 2+1 door design: the driver's side has only one door, while the passenger side has two doors for front and rear passengers to enter and exit, with the rear door handle adopting a unique hidden design. 2. Performance: The Veloster excels in performance. It is equipped with the renowned Gamma 1.6L T-GDI turbocharged engine, delivering a maximum power of 204 horsepower and a peak torque of 265 N·m. In terms of power data, the Veloster 1.6T can already compete with some 2.0T models. For the transmission system, the car offers a 6-speed manual and a 6-speed automatic transmission.
8
5
Share

Why does the red light turn on when charging the Wuling Mini?

Reasons why the red light is on when charging the Wuling Mini: The converter of the charger is damaged and cannot convert or charge, replace the charger resistor. Charging precautions are as follows: Suitable charging locations: It is best to charge the battery in a cool, ventilated, and dry place. Direct sunlight or rain can adversely affect the performance of the battery and charger. Keep the battery and charger away from other heat sources during charging. Full charge status: The battery should be fully charged promptly after use. The charger showing a green light indicates a full charge. Storing the battery in a low-charge state for a long time or using the battery without a full charge will affect its performance. Using the battery 3 hours after the charger shows a green light yields the best results.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.