Where is the car film applied?

How to Close the Engine Hood on a Corolla?

When closing the engine hood on a Corolla, first lower the front hood support rod. With your other hand, hold the hood and slowly move it downward. When the hood is about 30 centimeters from closing, release it to allow it to fall freely. A "clunk" sound indicates that it is locked. If you don't allow the hood to fall freely, it may not close properly. Below are the functions of the engine hood: 1. Airflow Guidance. For objects moving at high speed in the air, the air resistance and turbulence generated around the object can directly affect its trajectory and speed. The shape of the engine hood can effectively adjust the direction of airflow relative to the car's movement and the resistance it generates, reducing the impact of airflow on the vehicle. Through guidance, air resistance can be decomposed into beneficial forces, increasing the downforce on the front wheels and improving driving stability. 2. Protection of the Engine and Surrounding Components. Beneath the engine hood lie critical components of the car, including the engine, electrical circuits, fuel lines, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and construction of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. 3. Aesthetics. The exterior design of a vehicle is a direct reflection of its value. As an important part of the overall appearance, the engine hood plays a crucial role in enhancing visual appeal and embodying the concept of the entire car.

3

4

Share

What is an Automotive Chip?

An automotive chip is an integrated circuit formed by a large number of microelectronic components (such as transistors, resistors, capacitors, etc.) placed on a plastic substrate to create a single chip. Below is an introduction to automotive chips: 1. A chip, generally referred to as a semiconductor component product, is also known as an integrated circuit; 2. Automotive chips are mainly divided into three categories: functional chips, power semiconductors, and sensors; 3. Functional chips primarily refer to processor and controller chips; 4. For a vehicle to operate on land, it relies on an electronic and electrical architecture for information transmission and data processing. The vehicle control system mainly includes several major parts: the body electronic system, vehicle motion system, powertrain system, infotainment system, and autonomous driving system. Under these systems, there are numerous sub-functions, each of which is supported by a controller. Inside each controller, there is a functional chip.

2

Share

Is the Electronic Annual Inspection Label Recognized by Traffic Police?

The electronic annual inspection label is recognized by traffic police. On June 20th, the nationwide implementation of electronic annual inspection labels was fully rolled out. After passing the annual inspection, vehicle owners will receive an electronic label. During inspections, only the electronic annual inspection label needs to be presented, eliminating the need to stick a paper label on the windshield. Below are the methods to present the electronic annual inspection label: 1. Online Presentation: When traffic police request to check the electronic annual inspection label, you can directly open the Traffic Management 12123 APP for online presentation. 2. Offline Presentation: During a traffic stop, you can present a screenshot of the label. 3. Printed Presentation: You can also print the electronic annual inspection label by saving a screenshot of the QR code and carrying it with the vehicle for immediate use when needed. All methods are equally valid.

2

5

Share

How Many Years Can a Sedan Be Driven Before Scrapping?

There is no usage lifespan limit for sedans. When the normal driving mileage reaches 600,000 kilometers, the state will guide the vehicle to be scrapped. Vehicle scrapping process: 1. The car owner applying for scrapping and renewal should fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix the owner's seal. 2. Apply at the registration acceptance counter. For vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age but are deemed to meet the scrapping standards after inspection by the vehicle inspection counter, a "Vehicle Scrapping Notice" will be issued. 3. The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". 4. After verifying the "Notice", the recycling company will dismantle the vehicle and take photos. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. 5. The vehicle owner should submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates will be reclaimed, and the application will be submitted for approval according to regulations to complete the scrapping registration.

13

5

Share

How to Drain the Coolant in a Mazda6?

The drain port for the Mazda6 coolant is located at the bottom of the radiator. To drain the coolant, you need to disconnect the return hose connecting the radiator to the engine. The specific steps are as follows: First, unscrew the cap of the radiator's small reservoir to release the internal high-pressure gas, then disconnect the hose between the car's radiator and the engine to drain the coolant. The use of coolant in the Mazda6 engine provides the following protective functions: 1. It offers anti-corrosion protection for components of the cooling system. 2. It prevents scale buildup, avoiding a reduction in the radiator's cooling efficiency. 3. It ensures the engine operates normally within the proper temperature range.

8

5

Share

How to Apply for a Temporary License Plate for a New Car?

You can apply at the vehicle management office or any traffic branch or team vehicle management station for a temporary license plate. Applicants for a temporary car license plate need to hold a unit introduction letter, vehicle origin certificate, qualification certificate, and other relevant documents (except for the introduction letter which is archived, the rest are returned to the applicant) to apply at the vehicle management office. During the application, the starting and ending locations of the vehicle's travel and the duration of the temporary license plate use should be specified. After the management staff review and inspect the vehicle, a temporary license plate will be issued, with the validity period and travel locations signed. The temporary license plate is valid for one month. After the car passes the review, the reviewing unit will process it, with a validity period of half a month, 15 days. Below are the materials required for applying for a temporary car license plate: 1. Original and copy of the vehicle qualification certificate (import certificate for imported vehicles) 2. Original and copy of the third part of the traffic compulsory insurance 3. Original and copy of the vehicle owner's identity proof 4. If applying on behalf of someone else, provide the original and copy of the agent's ID card

10

3

Share

Where is the car film applied?

How to Close the Engine Hood on a Corolla?

What is an Automotive Chip?

Is the Electronic Annual Inspection Label Recognized by Traffic Police?

How Many Years Can a Sedan Be Driven Before Scrapping?

How to Drain the Coolant in a Mazda6?

How to Apply for a Temporary License Plate for a New Car?

What is the purpose of the 12V socket in the trunk?

How Often Should the Clutch Fluid Be Replaced?

How to turn on the air conditioning in a Mercedes-Benz C260L?

Are charging piles for all new energy vehicles universal?