
Car engine coolant is located in the coolant reservoir on the right side of the engine compartment. Coolant is also known as antifreeze, which prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block when the car is parked in cold seasons. Precautions for using car engine coolant: 1. Different types of antifreeze cannot be mixed; 2. Do not open the radiator cap or drain valve immediately after driving; 3. When replacing the coolant, be sure to completely remove the old antifreeze and thoroughly clean the radiator. Steps to replace car engine coolant: 1. Unscrew the radiator cap and open the radiator drain valve to release the antifreeze; 2. Flush the engine cooling system; 3. Add new antifreeze when the engine is cool, filling it up to the maximum mark on the radiator.

I've driven several cars and know how crucial the coolant location is. It's usually in the engine compartment, a translucent plastic tank, often white or yellow, labeled 'Coolant' or 'COOLANT'. The position varies by car—my old Santana had it on the left side of the engine, while my new SUV has it on the right. Remember to check when the car is cold; just pop the hood to see the level, safest between MAX and MIN marks. If low, top up with the same type—avoid mixing blue and green to protect the engine. I check mine monthly to prevent overheating breakdowns. Once, a leak on the highway nearly fried my engine, so now I'm extra careful. Keeping the manual handy for location diagrams is simple and worry-free.

When I first bought my car, I was totally confused about where the coolant was. Later, I asked an experienced driver friend and finally figured it out. Open the hood and look for a plastic container that resembles a kettle, usually brightly colored and possibly labeled 'coolant reservoir' in English. Be careful when adding coolant if the level is low—don’t do it when the engine is hot, as it can burn your hands. I recommend beginners check the manual for labeled diagrams of its location and avoid adding tap water or incompatible coolant, which could corrode the pipes. I remember last time my car was low on coolant, I went to the 4S shop to top it up—it was located in front of the driver’s seat, and the process was simple to learn. Proper maintenance keeps the engine running quietly and reduces breakdowns.

Safe driving is crucial, and remembering the coolant level is essential. It is usually located in the engine compartment, in a round or square reservoir with clear markings. Check to ensure the fluid level is within the range to prevent engine overheating and stalling. Take a quick look before each maintenance to save trouble.

If you enjoy DIY car repairs, locating the coolant is quite straightforward. Pop the hood and look for the plastic reservoir with a cap, typically positioned at the front or side. Use a flashlight to check the fluid level against the markings—top it up with OEM-spec coolant if low. Always perform this when the engine is cold, and avoid mixing brands to prevent chemical reactions that could cause damage. Regular coolant replacement helps extend engine lifespan.


