Where is the car air conditioning thermostat located?

2 Answers
ChloeMarie
09/02/25 2:04am
The car air conditioning temperature control switch is located on the air conditioning control panel, while the temperature sensor is installed at the air intake position of the air conditioning system. The operating range of the car thermostat is generally between 85 to 105 degrees Celsius. Air Conditioning Layout: Different types of air conditioning systems have varying layout configurations. Currently, most passenger cars use integrated heating and cooling air conditioning systems. The typical arrangement combines the evaporator, heater core, centrifugal blower, and control mechanisms into a single unit, referred to as the air conditioning assembly. Air Conditioning Components: Modern air conditioning systems consist of refrigeration systems, heating systems, ventilation and air purification devices, and control systems. A car air conditioning system mainly comprises components such as the compressor, electronically controlled clutch, condenser, evaporator, expansion valve, receiver-drier, piping, condenser fan, vacuum solenoid valve, idle speed controller, and control system.
Was this review help?
7
1
Share
NolanRose
09/14/25 4:25am
I've driven quite a few cars and found that there's really no standard location for the AC thermostat. In most family cars like the Corolla or Sylphy, it's actually hidden inside the dashboard, right behind the center console panel. Think about it - doesn't the cool or warm air come out from the dashboard when you're driving? Its sensor is like a little ear there, detecting the cabin temperature. Some older models have odd designs, maybe placing it behind the blower motor or behind the glove compartment. If you've ever taken apart the dashboard to replace the cabin air filter yourself, you might have seen it - looks like a little button with wires attached, feeling cool to the touch. Don't mess with it yourself though, if you mess up the wiring the AC will go crazy.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

Are There Automatic Transmission Seven-Seater Cars?

Seven-seater cars do come with automatic transmissions. Below is a relevant introduction to automatic transmission vehicles: 1. Overview of Automatic Transmission Cars: Automatic transmission vehicles typically utilize an automatic transmission (AT) to regulate speed. While driving, the control system of the automatic transmission automatically selects the appropriate gear based on the engine's RPM and load, replacing the driver's subjective judgment of timing and gear-shifting operations. 2. Operational Characteristics of Automatic Transmission Cars: In modern automatic transmission vehicles, the driver only needs to control the accelerator pedal. The computer analyzes signals such as engine throttle opening and vehicle speed collected by sensors to automatically control gear shifting or engage different gears. Generally, automatic transmissions result in some loss of engine power.
3
3
Share

What is the function of the reverse gear lock in the transmission control mechanism?

The function of the reverse gear lock in the transmission control mechanism is to require the driver to apply greater force on the gear lever to engage reverse gear, serving as a reminder to prevent accidental engagement of reverse gear and improve safety. The safety devices of the transmission control mechanism include: Direct control type. The transmission of most vehicles is located near the driver's seat, with the gear lever extending from the floor of the cab, allowing the driver to operate it directly. This control mechanism generally consists of a gear lever, shift blocks, shift forks, shift fork shafts, and safety devices, mostly assembled in the upper cover or side cover of the transmission. Remote control type. When the driver's seat is far from the transmission or the gear lever is arranged on the steering column below the steering wheel (in some cars), several transmission components are usually added between the gear lever and the shift fork to form a remote control mechanism. The positioning and locking devices of the transmission control mechanism: Self-locking device, the so-called self-locking prevents automatic axial movement that could cause automatic gear engagement or disengagement. Interlocking device, the function of the interlocking device is to prevent the simultaneous movement of two shift fork shafts, meaning that when one shift fork shaft is moved axially, the other shift fork shafts are locked, thereby preventing the simultaneous engagement of two gears.
11
3
Share

What is the first maintenance mileage for the Audi A3?

The first maintenance for the Audi A3 is at 10,000 kilometers. The maintenance items include engine oil, oil filter, air filter, fuel filter, cabin air filter, transmission fluid, brake fluid, spark plugs, and coolant. During the maintenance period, engine oil changes and oil filter replacements are free of charge. The three-guarantee validity period is 2 years or 50,000 kilometers, and the warranty period is 3 years or 100,000 kilometers, whichever comes first. The manufacturer provides one free maintenance service, which includes engine oil, oil filter materials, and labor costs. The Audi A3 is a compact sedan under the Audi brand. The car has a length, width, and height of 4292mm, 1765mm, and 1423mm respectively, with a wheelbase of 2578mm. The drive system is front-engine, front-wheel drive with turbocharging.
15
4
Share

What is the method to reset the maintenance light on the Envision?

The method to reset the maintenance light on the Envision is: 1. Use the up and down buttons on the multifunction steering wheel to locate the oil life, then press and hold the button with a checkmark on the right side of the steering wheel until the oil life displays 100%; 2. Alternatively, you can select the maintenance reset option via the menu button and hold it down to reset. Many modern vehicles come with a maintenance mileage recording function. If the vehicle exceeds the specified maintenance mileage without servicing, the maintenance light on the dashboard will illuminate. The Envision is a model under the Buick brand of Shanghai General Motors, with body dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, and a wheelbase of 2750mm. In terms of exterior design, the Envision features a newly designed intelligent drag-reducing grille, aluminum roof rails, newly designed chrome dual exhaust pipes, 19-inch multi-spoke aluminum alloy wheels, and multifunctional exterior rearview mirrors.
4
5
Share

Why does the car air conditioner cool at idle but not while driving?

Car air conditioner cools at idle but not while driving due to reasons such as insufficient refrigerant, severely clogged air filter, or excessively dirty condenser. Here is an introduction to car air conditioning: 1. Introduction: Car air conditioning refers to the air conditioning device installed in a car, which can cool, heat, ventilate, and purify the air inside the cabin. 2. Function: It provides a comfortable environment for passengers, reduces driver fatigue, and improves driving safety. The air conditioning system has become one of the indicators of a car's full functionality. 3. Components: Generally includes cooling devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, with a simple structure and easy operation, making it a popular modern car air conditioning system internationally.
20
3
Share

Is the rear window film applied on the inside or outside of the car?

Automotive rear window film is applied on the inside. The following is an introduction to automotive glass: 1. Introduction: Automotive glass is manufactured by heating the glass to near softening temperature in a furnace, then rapidly transferring it to air grids with varying cooling intensities for uneven cooling. 2. Function: This process creates different stress zones between the main viewing area and peripheral areas of the glass. Typically, glass produced this way is zone-tempered glass. 3. Application: The peripheral areas are positioned in the strong cooling zones of the air grids, requiring full tempering. These areas exhibit good fragmentation characteristics and high tempering strength. The main viewing area is located in the weak cooling zones, resulting in larger fragments and lower tempering strength.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.