Where is the car air conditioning evaporator located?

2 Answers
JohnAnn
07/24/25 8:11pm
The car air conditioning evaporator is located inside the glove compartment on the passenger side, behind the cabin air filter. The function of the car air conditioning evaporator is to convert high-pressure liquid into gas, which is then blown out by the blower to achieve cooling. Common causes of car air conditioning evaporator failure include: 1. The expansion valve's adjustment range is too small, resulting in excessively low low-pressure; 2. Insufficient refrigerant in the system, leading to low evaporation pressure; 3. Clogged interior circulation filter; 4. Malfunctioning temperature sensor causing the compressor to run continuously. Solutions for car air conditioning evaporator issues: 1. Check if the temperature control sensor is properly positioned; 2. Replace the temperature control regulator; 3. Inspect whether there are any faults in the air conditioning computer control.
Was this review help?
7
0
Share
VanAdriana
08/11/25 11:02am
The car's air conditioning evaporator is usually hidden under the dashboard, to be more precise, near the footwell of the front passenger seat. That spot is quite concealed—you'd need to remove the glove box or some lower interior panels to see it. Why is it placed there? Because the air needs to be cooled by the evaporator before being blown out, and its position near the front of the car makes it easier to connect to external air ducts. If the AC isn't cooling properly, the evaporator might be the issue—perhaps leaking refrigerant or frozen pipes causing blockages. I often encounter this issue when repairing cars; cleaning it can be a hassle, but regular maintenance can prevent major problems. This design placement ensures faster and more efficient airflow, though it makes repairs more challenging. The exact location varies slightly by model—SUVs might have it positioned lower, while sedans are more compact. Either way, knowing this helps stay calm when troubleshooting issues.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Does the Haval F7 spare tire have a tire pressure sensor?

Haval F7 spare tire has a tire pressure sensor. The following are the location and specific judgment of the Haval F7 spare tire pressure sensor: Location of the Haval F7 spare tire pressure sensor: The tire pressure of the Haval F7 is displayed on the dashboard, which can monitor tire pressure and temperature in real time. When the tire is abnormal, it will alarm to remind the driver to take corresponding measures to avoid accidents. Taking the 2021 Haval F7 as an example, it is a compact SUV with a body size of 4620mm in length, 1846mm in width, 1690mm in height, a wheelbase of 2725mm, and a minimum ground clearance of 169mm. The 2021 Haval F7 is equipped with a 1.5T turbocharged engine, with a maximum horsepower of 169PS, a maximum torque of 285Nm, a maximum power of 124kW, and is matched with a 7-speed dual-clutch transmission. Specific judgment: Specific operation to check the tire pressure of the Haval F7: Press and hold the OK button on the steering wheel for five seconds, then use the up and down adjustment buttons to adjust to the tire pressure display interface, where you can view the pressure and temperature information of the four tires in real time. The tire pressure display function of the Haval F7 can intuitively show the tire pressure: too low or too high tire pressure is not good, and it will also trigger the tire pressure display or tire pressure alarm system. Insufficient tire inflation pressure will also lead to excessive tire wear, poor vehicle control, reduced fuel economy, and may also cause wheel deformation, so the tire inflation pressure should be kept within the specified value. The hazards of excessive tire inflation pressure: Excessive tire inflation pressure will lead to uncomfortable riding, excessive wear in the center of the tire tread, and increase the possibility of tire damage on dangerous roads.
2
5
Share

What is the coverage and compensation amount of car insurance?

Coverage: The insured vehicle collides or overturns during use (Collision refers to direct contact between the insured vehicle and external objects, but human-induced scratches on the insured vehicle are not covered under the vehicle damage insurance; Overturning means the insured vehicle flips over due to natural disasters or accidents, losing its normal state and driving capability, and cannot be restored to driving condition without rescue.); The insured vehicle encounters fire, explosion, etc.; External objects collapse, airborne objects fall, or the insured vehicle falls parallel while driving; The insured vehicle is struck by lightning, storms, tornadoes, heavy rain, floods, tsunamis, ground collapse, ice collapse, cliff collapse, avalanches, hail disasters, mudslides, landslides, etc.; Natural disasters encountered by the insured vehicle during transportation (Only during transportation, with the 58 Auto driver accompanying and taking care of the vehicle, will the insurance company compensate); Compensation amount: Determined based on the extent of vehicle damage, with no uniform standard for compensation amount. Generally, there are the following scenarios: In case of total loss of the vehicle, compensation is calculated within the insured amount. If the insured amount exceeds the actual value of the insured vehicle at the time of the insurance incident, compensation is calculated based on the actual value of the insured vehicle at the time of the incident; In case of partial loss of the vehicle, for vehicles with the insured amount determined by the new car purchase price, compensation is calculated based on actual repair and necessary, reasonable rescue costs, using the formula: Actual repair and rescue costs - residual value. For vehicles with an insured amount lower than the new car purchase price at the time of insurance, in case of partial loss, compensation for repair and rescue costs is calculated based on the ratio of the insured amount to the new car purchase price at the time of the incident, using the formula: (Actual repair and rescue costs - residual value) × (Insured amount ÷ New car purchase price).
13
3
Share

What is the fuel consumption of the Beijing 40 diesel version?

The comprehensive fuel consumption of the Beijing BJ40 diesel version is 8.5L/100km. Currently, there are three models of the Beijing BJ40 diesel version on sale: the Automatic 4WD Blade Hero Edition Adventurer, the Automatic 4WD Blade Hero Edition Pioneer, and the Automatic 4WD Blade Hero Edition Adventurer (with front and rear electronic locks), all with a comprehensive fuel consumption of 8.5L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 9.1-10.2L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional cleaning of the carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio in the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. If the oxygen sensor is damaged, the exhaust pipe will emit darker exhaust gas during driving, and the sensor should be replaced immediately. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, faults may occur in older vehicles.
6
4
Share

Where is the horn relay located in an Accord?

In the fuse box next to the left shock absorber upper mount in the engine compartment. When the horn button is pressed, current flows through the circuit to the electromagnetic coil of the horn relay. The coil then attracts the moving contact switch to close, allowing current to reach the horn. This current activates the electromagnet inside the horn, causing the diaphragm to vibrate and produce sound. More details about the Accord are as follows: 1. The Accord, as an embodiment of Honda's 'innovative' spirit and global leading technology, continues to create new value and has won the trust of 19 million users worldwide. 2. In 1999, the sixth-generation Accord entered China, marking the first time the world's latest and most advanced model was introduced simultaneously in the Chinese automotive market. Over 15 years in China, the Accord has consistently undergone vertical generation changes and continuous evolution, earning the trust of over 1.5 million Chinese car owners. 3. The ninth-generation Accord, launched in September 2013, incorporates Honda's global leading technologies. It showcases the extraordinary charm of a 'fully-armed technological' vehicle through three groundbreaking technologies: Dream Power Technology, Ultimate Driving Pleasure Technology, and Luxury Cabin Technology, strongly refreshing industry standards with its comprehensively evolved capabilities. 4. Based on an in-depth understanding of Chinese consumers' needs, GAC Honda further enhanced the technological and luxurious feel of the ninth-generation Accord, positioning it as the 'All-Value Evolution Technology Flagship,' perfectly surpassing the expectations of the social elite for mid-to-high-end vehicles.
20
0
Share

How to Force Reset the Tiguan Sunroof?

Hold the sunroof button to open it fully and continue pressing for a few seconds without releasing. Similarly, hold the button to close it completely and continue pressing for a few seconds. Repeat this process several times to reset it. Below is some relevant information about sunroofs: 1. Regularly check the waterproofing of the sunroof. Many people are unaware that sunroofs are not "sealed." The sunroof frame is equipped with drainage holes that channel water accumulated during rain or snow out of the vehicle. If these drainage holes become clogged or corroded, water may back up into the sunroof, making drainage inspection essential. 2. In addition to cleaning the sunroof every two months, take time annually to thoroughly clean the rubber seals. Sunroof seals typically use rubber gaskets, so it's important to keep them dust-free during regular use, especially in autumn, winter, or after long-distance driving. Use a specialized dusting brush for cleaning. The movable outer frame of the sunroof is made of low-maintenance materials, but the mechanical parts require cleaning with engine oil or lubricant. A cleaning interval of two months is ideal. In seasons with heavy sand or dust, use a sponge to clean the seals based on the actual condition of the sunroof. Additionally, if the sunroof freezes in winter, avoid forcing it open, as this can damage the motor. 3. The sunroof control panel also requires proper care. Before opening the sunroof each time, check for any obstacles on the roof that might hinder the movement of the glass panel. Sunroof panels are generally designed with built-in heat insulation and UV protection. Avoid using sticky cleaning agents when washing the panel, and be gentle when cleaning the button areas to prevent damage from excessive force.
16
0
Share

What are the speed limits for each lane on a four-lane highway?

According to regulations from the national transportation department, the speed limits for four-lane highways are as follows (from left to right): First lane: 100-120 km/h (generally reserved for passenger cars); Second lane: 80-100 km/h; Third lane: 60-100 km/h; Fourth lane: Emergency lane. Relevant details are as follows: 1. Lane speed limits: For two lanes in the same direction, the minimum speed in the left lane is 100 km/h; For three or more lanes in the same direction, the minimum speed in the leftmost lane is 110 km/h, and the minimum speed in the middle lane is 90 km/h. 2. Vehicle speed limits: The maximum speed must not exceed 120 km/h, and the minimum speed must not be lower than 60 km/h. On highways, the maximum speed for small passenger vehicles must not exceed 120 km/h, for other motor vehicles it must not exceed 100 km/h, and for motorcycles it must not exceed 80 km/h.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.