Where is the car ACC located?

1 Answers
RosalieAnn
07/30/25 7:14am
Automobile ACC line is located in the car's fuse box. Here is relevant information: 1. Open the car's fuse box, turn off the vehicle's power supply, and ensure the dashboard lights are off. Locate the yellow fuse inside the fuse box, and test it with a circuit tester to check if there's electricity. When the vehicle's power is turned on, if the yellow fuse lights up on the tester, it can be confirmed as the ACC line. 2. The ACC line is the ignition power line, meaning it connects to the key-controlled ACC power line. When the key is in the ACC position, i.e., when the ACC line is connected, some of the vehicle's electrical equipment is powered, such as the radio, audio system, etc., but other parts of the vehicle are not yet powered.
Was this review help?
3
3
Share
More Forum Discussions

How to Deal with Road Surface Water Accumulation?

Implement organized drainage with systematic design and slope control. Poor connection between entrances/exits and peripheral municipal systems leads to elevation differences causing backflow. Adopt layered backfilling, compaction, and tamping for fill soil. Inadequate compaction of paving subgrade results in surface depressions after settlement. Conduct thorough measurement verification to prevent elevation errors. Insufficient drainage slopes around the site, despite having storm drains, still easily cause road surface water accumulation.
12
0
Share

How to choose between Panamera and Mercedes-Benz S?

Panamera is a supercar, while the Mercedes-Benz S-Class is a luxury car. Although the price difference is not significant, the public generally perceives supercars as more premium. The Mercedes-Benz S-Class meets the needs and positioning of business vehicles, often considered a must-have for successful individuals; the Panamera's positioning and exterior design are more suitable for younger consumers.
13
4
Share

How to Use a Vernier Caliper Correctly?

Check whether the zero graduation lines of the vernier and the main scale are aligned. If aligned, measurement can proceed; if not, record the zero error before measuring. Hold the main scale with your right hand and move the vernier with your thumb. Hold the object to be measured with your left hand, placing it between the external measuring jaws. When the jaws are tightly fitted against the object, you can take the reading. Look to the right from the zero graduation line of the main scale to locate the zero line of the vernier scale. Then, observe the value of the first division line to the left of the vernier scale zero line on the main scale, which represents the integer value. Identify which division line of the vernier scale aligns with a division line on the main scale, counting from the left of the vernier scale zero line, to read the fractional division value. Multiply the fractional division value by the corresponding millimeter value per division of the vernier scale (depending on the type of vernier caliper) to calculate the decimal value. The sum of the integer value and the decimal value gives the measured dimension of the object.
20
1
Share

What is the solution for Nissan CVT overheating protection?

In some sparsely populated road conditions or high-speed roads without speed limits, small-displacement engines may operate at high speeds under heavy loads. When the CVT overheating protection indicator appears, you can first pull over to the side of the road, allow proper cooling, and then continue driving.
20
1
Share

How to Repair a Faulty Starter Motor?

Its working principle involves the rotation of the energized coil in the magnetic field, which drives the starter rotor to rotate. The small gear on the rotor then drives the engine flywheel. Before repairing, it is necessary to inspect the clutch and transmission, and strictly follow the regulations to select the appropriate lubricating oil and fuel, as well as to reinstall the ring gear. Replace the flywheel and ring gear, weld the ring gear onto the flywheel, and correctly use the low-temperature starting device.
20
5
Share

How to Connect Bluetooth in Accord?

First, turn on the Bluetooth on both your phone and the car's settings page. Tap the Bluetooth option to enable it and enter the Bluetooth settings page. Next, on your phone's Bluetooth settings page, enable 'Discoverable' mode to allow proper connection with the car's Bluetooth device. In the phone's Bluetooth interface, click 'Search' to pair, then select the 'Auto-connect' feature. As long as you are within a 10-meter range, it will automatically connect.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.