Where is the Camry trunk switch located?

1 Answers
MacBrandon
07/30/25 5:27am
The Camry trunk switch is located on the door trim panel of the driver's compartment. To open the trunk, simply pull up the trunk switch. Taking the 2019 Camry as an example, it is a mid-size sedan with the following dimensions: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, and curb weight 1530kg. The 2019 Camry is equipped with a 2.0L inline 4-cylinder naturally aspirated engine, delivering maximum power of 178PS, maximum torque of 230Nm, and maximum output of 131kW, paired with a 10-speed continuously variable transmission.
Was this review help?
17
4
Share
More Forum Discussions

Why is the window rolling up and down slowly?

The reasons for slow window operation: 1. The window felt channel is too tight or doesn't match the curvature of the glass; 2. The window regulator has become loose over time, causing misalignment, or the cable has developed burrs, increasing resistance; 3. The regulator motor has aged and lacks sufficient power; 4. The outer water seal strip has aged and creates resistance, or the inner dust seal strip has deteriorated. It's recommended to visit a repair shop for inspection. Automotive glass is manufactured by heating it to near softening temperature in a furnace, then rapidly transferring it to cooling zones with varying intensities, creating different stress levels between the main viewing area and peripheral zones. Typically, this process produces zone-tempered glass.
20
0
Share

What does D3 mean in an automatic transmission car?

D3 in an automatic transmission car means locking the gear in the 3rd gear, where the vehicle can automatically switch between 1st, 2nd, and 3rd gears, but cannot exceed the 3rd gear. Automatic transmissions also have D1 and D2. D1 means manually locking the car's gear in the 1st gear, not controlled by the car itself; D2 means manually locking the gear in the 2nd gear, not exceeding the 2nd gear, allowing the car to automatically switch between 1st and 2nd gears. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L.
15
1
Share

What are the impacts of excessive engine oil in Tucson?

Tucson excessive engine oil impacts: 1. Increases internal engine power loss and leads to more oil splashing onto cylinder walls, potentially causing oil burning and exhaust issues; 2. Excessive oil in the lubrication system increases the load and pressure on components, accelerating their aging, and may even result in crankshaft oil seal leakage. In severe cases, some cylinder gaskets in the crankshaft case may leak oil. The Tucson is a compact SUV under Hyundai, with body dimensions of 4545mm in length, 1850mm in width, 1670mm in height, and a wheelbase of 2670mm.
20
4
Share

What are the benefits of cleaning the three-way catalytic converter in a car?

The benefits of cleaning the three-way catalytic converter in a car: After cleaning the three-way catalytic converter, the vehicle's acceleration becomes noticeably faster, power improves, and exhaust emissions meet standards, reducing the risk of spontaneous combustion and making driving safer. The three-way catalytic converter is an important external purification device installed in the car's exhaust system. It converts harmful gases such as CO, HC, and NOx in the car's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Regularly cleaning the three-way catalytic converter not only helps improve the vehicle's engine performance but also reduces frequent alarms from the exhaust system's oxygen sensor. It is particularly suitable for closed-loop fuel injection engines. Vehicles with good driving habits can be cleaned every 10,000 to 20,000 kilometers.
18
1
Share

What is the principle of the Toyota Camry Hybrid?

Toyota Camry Hybrid adopts a series-parallel hybrid system. In its power coupling mechanism, the motor MG1 and the engine need to undergo planetary gear speed coupling. After speed coupling, torque coupling with motor MG1 is also required. Through speed synthesis, motor MG2 adjusts the engine speed, making the engine speed independent of the vehicle speed, thereby achieving the ECVT function. The Camry is a model under GAC Toyota. In terms of body dimensions, it measures 4900mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm.
18
5
Share

Where is the VIN stamping located on the Dongfeng Peugeot 2008?

The locations of the VIN stamping on the Dongfeng Peugeot 2008: 1. In the engine compartment, lift the engine hood, and you will find it on a vertical steel plate at the lower front left side near the windshield; 2. Next to the passenger door frame, visible upon opening the door. The VIN (Vehicle Identification Number) is a unique 17-character alphanumeric code used to identify a vehicle's manufacturer, engine, chassis number, and other specifications. The Peugeot 2008 is a strategic model introduced to expand Dongfeng Peugeot's lineup of urban compact SUVs. In terms of dimensions, it measures 4159mm in length, 1739mm in width, 1578mm in height, with a wheelbase of 2538mm.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.