···
Log in / Register

Where is the cabin air filter of the JINGYI X3 located?

3 Answers
DiFrank
07/29/25 8:14pm
The cabin air filter of the JINGYI X3 is located in the engine compartment, directly above the engine and below the wipers. There is a black cover plate, and the filter can be seen after removing the cover. Below is some relevant information: 1. The JINGYI X3 is an SUV strategic model launched by Dongfeng Fengxing Automobile for young first-time buyers. It is the first extra-large urban wide-comfort SUV in China. 2. A dirty cabin air filter can lead to reduced cooling efficiency of the air conditioning, decreased airflow from the vents, and most importantly, it can affect the air quality inside the vehicle, impacting the health of the driver and passengers. 3. If the airflow from the air conditioning significantly decreases, the cabin air filter may be clogged. The filter should first be cleaned or replaced if necessary. The frequency of cleaning depends on road conditions (such as dusty roads, etc.), and it is recommended to clean it earlier rather than later.
Was this review help?
19
5
Share
HaleyLee
08/14/25 4:36pm
I'm quite familiar with the Jingyi X3. The cabin air filter is cleverly hidden—open the hood and look toward the base of the windshield on the passenger side, near the wiper roots. You'll find a black plastic cover there. Use a Phillips screwdriver to remove three screws, lift the cover, and you'll see the rectangular filter slot. Last time I replaced it, it only took me ten minutes. Just pay attention to the arrow markings on the filter indicating the correct orientation—don't install it backward. This spot tends to collect leaves, so I recommend cleaning it every six months; otherwise, you might get a dusty smell when you turn on the AC.
Was this review help?
9
3
Share
Expand All
McSamuel
10/16/25 3:13am
Just helped my neighbor replace the air filter on a Jingyi X3, with the main operation in the engine compartment. Standing at the front of the car, the filter housing is located below the right front windshield, covered by a plastic lid with clips. You'll need a T20 screwdriver bit wrench, and be careful not to break the clips during removal. The CF105 carbon fiber filter provides the best dust absorption. After replacement, remember to wipe dry any accumulated water in the lid's grooves—last time I skipped this step, and the drain got clogged during the rainy season.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

Should the Handbrake Be Engaged for Long-Term Parking?

Engaging the handbrake is necessary for long-term parking. Additional relevant information is as follows: 1. The handbrake is designed for parking purposes; only by firmly engaging the handbrake can the vehicle be prevented from moving due to external forces. For instance, if the parking area has a slope, failing to engage the handbrake may cause the vehicle to roll due to inertia. Even when parked on level ground, it is advisable to firmly engage the handbrake. 2. It is important to note that applying 100% force to a non-electronic handbrake for extended periods can shorten the lifespan of the handbrake cable. This is because the cable remains under tension when the handbrake is engaged, which over time can lead to irreversible plastic deformation of the cable, increasing its load and eventually causing it to loosen.
15
4
Share

What are the distinguishing marks between China 5 and China 6 emission standards?

China 5 and China 6 emission standards primarily differ in the reduction levels of harmful substances in vehicle exhaust emissions. However, there are no prominent visual markings to distinguish between China 5 and China 6 vehicles. Additional relevant information is as follows: 1. China 5 and China 6 vehicles can only be identified through their accompanying environmental protection information, as they are indistinguishable by appearance. They can also be differentiated by certain key engine parameters. 2. The China 5 emission standard's control level is equivalent to Europe's currently implemented Euro 5 standard. It imposes stricter limits on vehicle emissions such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Each upgrade from China 1 to China 4 standards has reduced single-vehicle pollution by 30% to 50%.
11
0
Share

How to Remove Fog from the Windshield?

Methods to defog car windshields are as follows: 1. Open the windows; 2. Use a defogging agent; 3. Turn on the air conditioning heating; 4. Activate the car's defogging function; 5. Apply a mixture of dish soap and water or soapy water to the windows; 6. Place a dehumidifying box inside the car; 7. Wipe with a towel; 8. Adjust the fan speed appropriately and turn on the cooling switch. The reason for windshield fogging is: the temperature difference between the inside and outside of the car causes the water vapor inside the cabin to condense on the inner windshield, forming fog. Methods to prevent windshield fogging are: 1. Use specialized defogging products before driving; 2. Utilize the air conditioning's cooling and dehumidifying function to reduce air humidity.
4
4
Share

What are Cruise Control and Speed Limiter?

Cruise control system, also known as speedostat or autonomous cruise control, automatically maintains the vehicle's speed as set by the driver without requiring accelerator pedal input, allowing the car to travel at a constant speed. Speed limiter ensures the vehicle operates within the driver-set speed range to prevent speeding. Additional details: 1. Cruise control is most common. Basic operation involves activating cruise mode, selecting the desired speed (enabling throttle release while maintaining speed), and adjusting velocity via control buttons/lever. Cancellation occurs by braking or switching off the system. Key feature: Complete foot relief, allowing hand control of both steering and throttle adjustment. 2. Speed limiter closely resembles cruise control, but crucially requires maintaining accelerator pedal pressure after setting the limit. Upon reaching the preset speed, the ECU automatically regulates fuel injection - only aggressive pedal depression overrides this, as slight throttle increases have no effect.
6
3
Share

How to Clean Carbon Deposits on Engine Valves?

Use the walnut blasting method. The walnut blasting method involves grinding walnut shells into powder and then using a specialized machine to blast the walnut shell particles, which can remove carbon deposits from the engine. It is recommended to seek professional assistance at a specialized service center. Additional relevant information is as follows: 1. It is normal for carbon deposits to form inside a car's engine after prolonged use because the combustible air-fuel mixture in the engine cannot burn completely. Over time, carbon deposits will accumulate. Carbon deposits can affect the engine's performance, so it is advisable for car owners to clean them regularly. 2. Fuel additives can remove some carbon deposits and help reduce their formation. However, fuel additives cannot completely eliminate carbon deposits, and only genuine fuel additives from reputable brands have the effect of cleaning carbon deposits. Low-quality fuel additives may damage the engine and do not effectively remove carbon deposits.
15
4
Share

Is there a charging port on D-series bullet trains?

D-series bullet trains have charging ports located near the luggage rack on the wall, which is overhead, or under the seats, possibly under the front seats as well. There are various models of bullet trains, and the charging sockets are placed in different locations. The power charging sockets in business class and first class are more noticeable than those in second class, usually positioned in front of the armrest or under the seat. In business class, every seat has a charging port. Both hard sleeper and soft sleeper compartments on bullet trains are equipped with charging sockets and USB ports, ensuring safety and convenience. However, these charging sockets do not support high-power appliances and are only suitable for small digital devices. Pay attention to charging safety, as the consequences of a fire could be unimaginable. Currently, high-speed rail and bullet train seats and sleeper compartments are equipped with charging ports for digital products, supporting both three-pin and two-pin national standard plugs.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.