Where is the cabin air filter of Kaiyi C3 located?

2 Answers
MacPaisley
07/25/25 2:11pm
The Kaiyi C3 does not come with a cabin air filter from the factory. If you wish to improve the air quality inside the vehicle, you can install an aftermarket cabin air filter. The Kaiyi C3 is a compact car under the Kaiyi brand, with body dimensions of 4250mm in length, 1726mm in width, and 1510mm in height, and a wheelbase of 2510mm. The Kaiyi C3 is equipped with a 1.5-liter naturally aspirated engine across all variants, delivering a maximum power output of 80 kilowatts and a peak torque of 140 Newton-meters. The engine reaches its maximum power at 6000 revolutions per minute and its maximum torque at 4500 revolutions per minute. In terms of suspension, the Kaiyi C3 features a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
Was this review help?
19
2
Share
LaHarley
08/11/25 9:01pm
The air filter for the Kyrie C3 is typically located behind the glove compartment in front of the passenger seat. I often help friends with car repairs, so I'm very familiar with this. To find it, you need to open the glove compartment, reach inside or remove the panel, and the filter is hidden inside, usually housed in a plastic case. Removing it isn't too difficult, but if you're not experienced, you might damage the clips, so it's advisable to check the manual or look up a video online for the steps. The air filter is responsible for filtering the air, and if not replaced for a long time, it can accumulate dust and mold, affecting the air quality inside the car. It's best to replace it during seasonal changes, especially in spring and autumn, and it should be checked every 10,000-20,000 kilometers or once a year, which is quite important for improving driving comfort. Developing a habit of regular checks can help avoid odors and cooling issues.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

What Causes the Clicking Sound and Jerking Sensation When Braking?

The main reason for the sound may be the electronic linkage between the braking system and the automatic transmission. When the brake is pressed, the transmission solenoid valve opens and produces a "clicking" sound. At this point, the gear shift lock button must be pressed to engage the gear, which serves as a safety reminder. Here are the possible reasons for the clicking sound and jerking sensation when braking: 1. Normal ABS activation. The ABS operates in a cycle of locking and releasing, keeping the vehicle in a state of near-lock rolling. When you brake hard and trigger the ABS, it produces a clicking sound, which is normal. In this case, simply press the brake pedal firmly to the floor. 2. The "clicking" sound from the gear shift in automatic transmission vehicles when braking. If you hear a "clicking" sound between the transmission and the gear shift when pressing the brake pedal, the main cause may be the electronic linkage between the braking system and the automatic transmission. Pressing the brake causes the transmission solenoid valve to open, producing the sound, and the gear shift lock button must be pressed to engage the gear—this acts as a safety reminder. 3. Actual malfunction. If the clicking sound occurs even during light braking, or if your vehicle lacks an automatic transmission lock button, or if the sound is continuous or persistent, be cautious. This likely indicates a fault in the braking system or a loose component in the chassis. For safety reasons, the owner should promptly visit a 4S shop for inspection and repair.
1
4
Share

What is the top speed of the Gold Wing 1800?

Honda Gold Wing 1800 can reach a top speed of 180 km/h. The introduction of Honda Gold Wing 1800 is as follows: 1. Overview: The Honda Gold Wing GOLD-WING-1800 (GL1800) is the first model in the Honda Gold Wing series. It was introduced in 1975 and has undergone several generations of upgrades, each featuring significant changes and more luxurious equipment, with the only constant being the Gold Wing's enduring premium quality. When the new century began, the BMW K1200LT, a long-time rival in the luxury touring motorcycle segment, nearly surpassed the Gold Wing with its ultra-luxury features, prompting the release of the latest 1.8L Gold Wing. In the following years, the Gold Wing continued to lead the pack. 2. Performance Features: The engine's rotation is smooth and harmonious, culminating in the exhaust system, with the 3×2 exhaust pipes clearly indicating this is a true 6-cylinder masterpiece. After the airflow passes through the 7L airbox, the dual 40mm electronic fuel injection carburetors begin their orderly operation, with each nozzle of the Keihin high-pressure carburetor featuring a four-point spray head, ensuring the engine delivers powerful performance at every stage. As expected, the GL1800's engine is electronically controlled. When the fuel mixture entering the cylinders is in question, control sensors step in to coordinate, which is why Honda proudly set the Gold Wing's first factory inspection interval at 50,000 kilometers.
15
5
Share

What are the reasons for the engine warning light in the Volkswagen Tacqua?

The engine warning light in the Tacqua may illuminate due to the following 7 main reasons: Sensor malfunction: The sensors involved include those for coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or oil quality issues: Failure to use the fuel or engine oil as specified by the manufacturer may cause engine wear, leading to the illumination of the warning light. Poor combustion of the air-fuel mixture: Incomplete combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Issues such as faulty spark plugs, ignition coils, fuel pump, or clogged fuel lines can cause poor combustion. Turbocharger problems: The intake boost pipeline or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake issues: Problems with the vehicle's intake system, such as clogged engine pipes, can lead to the warning light. A dirty or uncleaned air filter can cause intake problems. Exhaust issues: Exhaust system faults can also trigger the engine warning light. Common causes include faulty rear oxygen sensors, catalytic converter issues, or problems with the exhaust camshaft and bearings. The catalytic converter is the most frequent culprit, often due to the use of leaded gasoline, improper lubricant additives, physical damage, or fuel system malfunctions. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or if there is a mismatch between the anti-theft controller and the engine ECU, the engine may not operate correctly, and the warning light will illuminate. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally. Look for symptoms like shaking or black smoke. If present, avoid restarting the engine. Note: Do not restart the engine if the red warning light is on. If the engine can start, turn it off for 5-10 minutes. Then, without pressing the brake, press the start button once or turn the key halfway to the 'on' position (without engaging the clutch). The vehicle will perform a self-diagnostic check. After 5-10 seconds, observe if the warning light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use a diagnostic tool to read fault codes, identify the issue, and perform targeted repairs.
2
3
Share

What is Turbo Lag?

Turbo lag refers to the time required for the turbocharger's boost pressure to rise to its maximum value after the throttle is fully opened. The turbo lag phenomenon generated by turbocharged engines can be altered through technical means. Turbo lag is influenced by many factors, including the size of the turbocharger, engine displacement, degree of engine modification, rotational inertia of the turbo shaft, efficiency of the turbocharger, and intake losses. Turbocharging utilizes the exhaust gases produced during engine operation to drive the compressor. Throughout the boosting process, it does not consume engine power and can even enhance the engine's performance.
7
4
Share

How Do Driving Schools Recruit Students?

Here are the methods for driving schools to recruit students: 1. Establish registration offices in high-traffic areas to enhance visibility and credibility. 2. Launch different advertising slogans during different periods and under different policies to increase enrollment numbers. 3. Focus on promotional campaigns, recruit student agents, and offer corresponding rewards for in-depth promotion. Additional Information: Students can enroll as long as the driving school is legitimate. Required documents for registration may include copies of ID cards, residence permits, etc., with some regional variations in the specific documents needed.
19
2
Share

Can auxiliary license plates be installed?

A vehicle can only have one license plate; auxiliary plates cannot be installed. Here is some information about license plates: Introduction: License plates, commonly known as vehicle tags, are plates affixed to the front and rear of a vehicle. Materials: They are typically made of aluminum, sheet metal, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information. Purpose: License plates serve to identify and register vehicle information. Their primary function is to indicate the vehicle's registered region and allow authorities to trace the owner and registration details of the vehicle.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.