Where is the cabin air filter of Hyundai Verna located?

2 Answers
MacJosephine
07/24/25 10:41am
The cabin air filter of Hyundai Verna is installed behind the glove box. To replace the cabin air filter, follow these specific steps: 1. Open the glove box and remove the stoppers on both sides of the glove box. 2. Pull out the cabin air filter cover and remove the cabin air filter. 3. After replacing the cabin air filter, reassemble in the reverse order of disassembly. Here is some additional information about the cabin air filter: 1. Function of the cabin air filter: It filters dust and other pollutants entering the vehicle through the heating and air conditioning system from outside. 2. The cabin air filter should be replaced every 20,000 km: If you frequently drive in heavily polluted cities or on dusty and bumpy roads, it should be replaced more frequently.
Was this review help?
17
3
Share
VanDante
08/11/25 5:45am
Last time I changed the air conditioning filter on my Hyundai Verna, it was super easy! It's located behind the glove compartment on the passenger side. The exact steps are: first open the glove box, gently press the clips on both sides with your fingers to release them, revealing a plastic cover. Pry open the cover and you'll see the filter. The whole process takes about five or six minutes, and there are video tutorials online showing how to do it. I replace it every six months because accumulated dust and pollen can degrade the air quality inside the car, easily causing nasal sensitivity or odors. If you don’t change it, the airflow from the AC weakens, and the cooling effect worsens. Buying a filter yourself costs just 20-30 yuan—just make sure it matches the Verna model, and don’t install it backward (check the arrow direction). For daily commutes, keeping it clean gives peace of mind, saves money and time on garage visits, and even teaches you a handy skill—it really lifts your mood. After replacing it, the air feels fresher, and long drives become less tiring. Remember to check it regularly—don’t wait until a scorching day when problems arise to rush and fix it.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

What transmission does the Volkswagen Phideon use?

Volkswagen Phideon uses a transmission manufactured by Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Volkswagen Phideon is equipped with a 7-speed dual-clutch transmission. Dual-clutch transmissions differ from conventional automatic transmission systems by providing uninterrupted power output while offering the flexibility of a manual transmission and the comfort of an automatic transmission. There are two types of dual-clutch transmissions: dry-type and wet-type. When using the Phideon's transmission in daily driving, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid prolonged coasting in neutral. Many experienced drivers coast in neutral when driving manual transmission vehicles, but for automatic transmission models, coasting in neutral can cause overheating and may produce a noticeable jolt when shifting back into D (Drive) mode. Never shift into D or R (Reverse) before the vehicle comes to a complete stop. Some drivers shift into reverse while the vehicle is still moving to demonstrate smooth operation, but this can severely damage the transmission gears and may lead to gear grinding over time. Avoid frequently climbing steep slopes in D mode. Automatic transmission vehicles can overheat under high load or may upshift too early, resulting in insufficient power for climbing. In such situations, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck and move the vehicle onto the tow platform while in N (Neutral). Never use a tow rope or tow the vehicle directly with another vehicle.
3
2
Share

How to unlock the steering wheel of a Honda CRV?

To restore the dented areas on the car body, hammering and welding are required. Uneven areas after metalworking should be smoothed out with a clay-like material (commonly referred to as putty). Different grades of sandpaper are used to smooth out the uneven surfaces of the putty. To prevent rust, a layer of anti-rust paint needs to be applied. Before painting, the paint color must be matched according to the color palette, and the paint should be applied to the damaged area. The vehicle then needs to enter a paint drying booth for drying, and the previously removed parts should be reinstalled after the metalwork is completed.
19
1
Share

How to Quickly Shift Gears in Subject 3?

Subject 3 gear shifting operation methods are as follows: 1. It is necessary to coordinate the three operating components: the gearshift lever, the accelerator pedal, and the clutch pedal. 2. The basic principles of gear shifting are: increase speed before upshifting, decrease speed before downshifting, and ensure the gear matches the vehicle speed. Specific steps are as follows: 1. Coordination between accelerator and clutch: Depress the clutch pedal all the way down, and press the accelerator pedal gently and release it slowly. While driving, when upshifting, first increase speed, then release the accelerator with the right foot, depress the clutch with the left foot, perform the upshift operation, complete the upshift, slowly release the clutch, and after fully releasing, press the accelerator again; when downshifting, first release the accelerator pedal, gently tap the brake, then depress the clutch with the left foot, perform the downshift operation, complete the downshift, slowly release the clutch, and after fully releasing, press the accelerator again. 2. Operation method of the gearshift lever: The palm should touch the gear knob, and the five fingers should naturally grip the knob without holding it too tightly. When shifting gears, use the strength of the wrist and arm joints as the main force, with the shoulder joint assisting in shifting and disengaging gears. Avoid looking down at the gearshift or pulling and pushing forcefully when shifting. To shift from 1st to 2nd gear, gently push to the left and pull directly backward; to shift from 2nd to 3rd gear, first disengage 2nd gear, pause in neutral, then gently push forward into 3rd gear; to shift from 3rd to 4th gear, gently grip the knob and pull straight backward; to shift from 4th to 5th gear, after disengaging the gear, gently push to the right, then push forward into 5th gear.
3
2
Share

What is the normal temperature for the Hyundai Elantra's coolant temperature gauge?

Modern Elantra coolant temperature gauge 90 degrees is normal. The coolant temperature gauge displays the temperature of the coolant, making it easier for the owner to understand the condition of the car. When the car's coolant temperature is too high, the owner needs to stop and rest, waiting for the vehicle's coolant temperature to drop to normal temperature before continuing to drive. The following are the reasons why the coolant temperature gauge does not move: 1. The power cord of the coolant temperature gauge is open; the heating coil of the coolant temperature gauge is burned out; 2. The heating coil of the coolant temperature gauge sensor is burned out or the contact is poor; 3. The wiring of the coolant temperature gauge sensor is poor or open; 4. The stabilizer that supplies stable power to the coolant temperature gauge circuit is damaged.
18
3
Share

What are the dimensions of the Mercedes-Benz E300 model?

The dimensions of the Mercedes-Benz E300 are divided into length, width, and height: 1. Length is 5012mm; 2. Width is 1855mm; 3. Height is 1464mm; Here is an introduction about the Mercedes-Benz E300: The new generation Mercedes-Benz E-Class has dimensions of 5012mm in length, 1855mm in width, and 1464mm in height. Since the long-wheelbase model is 140mm longer than the prototype, reaching 3014mm; the interior space after the extended wheelbase is very ample, improving the comfort of both front and rear seats. The new generation Mercedes-Benz E-Class sedan has recently been officially introduced to the domestic market as an imported model, with the first two models being the Elegance and Fashion versions of the new E300.
14
0
Share

What type of engine oil is suitable for Nissan Sylphy?

Nissan Sylphy uses the original 5W30 engine oil. Among the two types of engine oil, 5W30 and 0W20, the Sylphy tends to favor 5W30, which offers better low-temperature fluidity and can adapt to lower temperature environments. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the value, the better it maintains viscosity at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a Nissan Sylphy is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows. Start the engine for 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add new engine oil through the oil filler cap on the engine valve cover. Generally, fill about three-quarters of a standard oil bottle; Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.