Where is the Cabin Air Filter of Haval H6 Located?

2 Answers
VonMicah
07/25/25 5:30am
Haval H6's cabin air filter is located behind the glove compartment on the passenger side. To replace it, you need to first remove the glove compartment. The cabin air filter is a crucial component in the vehicle's air conditioning system and requires regular replacement. It filters the air, and over time, it can become dirty, so it's recommended to replace it on schedule. In addition to regularly replacing the filter, the air conditioning system should also be periodically cleaned and disinfected. Prolonged use of the car's air conditioning can lead to bacterial growth, and failure to clean and disinfect it regularly may affect the health of the passengers. The Haval H6 is a flagship model under the Haval brand, positioned as an urban intelligent SUV. The vehicle's dimensions are 4640mm in length, 1825mm in width, and 1690mm in height. The front suspension of the car uses a MacPherson independent suspension, while the rear suspension features a double-wishbone independent suspension.
Was this review help?
5
1
Share
LailaRose
08/10/25 5:46pm
I've been driving a Haval H6 for several years, and the cabin air filter is located behind the glove compartment on the passenger side. After opening the glove box, you'll see plastic clips on both sides—just press them gently with your fingers and pull outward to remove the glove box. Inside, there's a rectangular cover panel; lifting it reveals the cabin air filter slot. The design is quite convenient, making it super easy to DIY. I recommend checking or replacing it every six months or 10,000 kilometers, especially during seasonal changes when pollen buildup can cause clogs. A dirty filter makes the cabin air stuffy and prone to mildew odors. Buying a compatible filter online is cheap and quick—just remember to install it with the arrow facing downward to ensure proper airflow direction. When reassembling the glove box, align it with the slots and push it back in place—don't force it to avoid cracking the plastic. Regular replacements keep the AC system healthier and improve driving comfort.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What are the common faults of the Soueast DX7?

Soueast DX7 common faults include: electronic parking brake failure, electronic handbrake failure, etc. The following are the specific introductions of the Soueast DX7: 1. Model positioning: The Soueast DX7 is the first SUV model launched by Soueast Motors, with dimensions of 4530mm in length, 1900mm in width, and 1700mm in height. 2. Powertrain: It is equipped with a 1.5T engine model, the Mitsubishi Motors 4A91 turbo, featuring a turbocharger from Mitsubishi Heavy Industries. The engine delivers a maximum power of 115kw/5600rpm and a maximum torque of 215Nm/2000-4500rpm, paired with either a 6-speed manual or a 5-speed automatic transmission, with a top speed exceeding 180km/h.
19
4
Share

How many cylinders does the Dongfeng Nissan X-Trail engine have?

Dongfeng Nissan X-Trail is equipped with a four-cylinder engine. Below is relevant information: 1. X-Trail Introduction: The Nissan X-Trail, known as 'Qijun' in Chinese, was launched in Japan at the end of 2000, directly competing with rivals like the Toyota RAV4 and Honda CR-V. 2. X-Trail Configuration: The X-Trail features an intelligent All-Mode 4×4 system, allowing drivers to freely choose between two-wheel drive, automatic, or locked four-wheel drive modes to handle various road conditions. 3. X-Trail Modes: The two-wheel drive mode effectively maintains low fuel consumption during daily driving; in automatic mode, the system intelligently distributes torque between the front and rear wheels from 100:0 to 50:50 based on road conditions, delivering optimal driving performance on all surfaces.
17
1
Share

What Causes Slower Acceleration After Refueling?

Reasons for slower acceleration after refueling are as follows: Fuel System: The engine fuel system is a common source of car problems. Clogged fuel injectors, leaking fuel lines, reduced fuel pump power, or blocked fuel filters can all cause poor uphill performance. The lack of power mainly occurs because the engine doesn't receive sufficient fuel during uphill driving, leading to decreased combustion efficiency and failure to meet required horsepower. Intake System: Besides fuel, the engine also requires air. If components like the air filter or throttle body become clogged or malfunction, resulting in insufficient air intake, this can also lead to poor acceleration and slower speed gain. Spark Plugs: Spark plugs are another frequent source of issues. If spark plugs fail to ignite properly, it may cause acceleration problems.
19
4
Share

Will Water Enter the Interior of an Off-Road Vehicle When Wading?

Water will not enter as long as the engine is running, because the exhaust pressure in the exhaust pipe is greater than the water pressure, preventing water from flowing back in. However, if the engine stalls and the water level rises above the exhaust valve of the engine cylinder head (or the highest point of the entire exhaust system), water can enter the engine. Here are some important considerations for off-road vehicles when wading through water: Maintain a moderate speed: Off-road enthusiasts often say, 'Drive fast on sand and gravel, but slow through water.' Driving too fast can create a high wave in front of the vehicle, increasing resistance and the risk of submerging the engine. Use a low gear: Keep the throttle steady, select a low gear before entering the water, avoid shifting during the wading process, and maintain a consistent engine speed to ensure strong power and adequate exhaust pressure in the exhaust pipe.
11
4
Share

Where is the Mikuni Carburetor Produced?

Mikuni carburetors are produced in Japan. Here is a detailed introduction to carburetors: Function: They utilize the kinetic energy of the incoming air stream to atomize gasoline. Depending on the engine's various operational states, the carburetor automatically mixes the appropriate concentration and outputs the corresponding amount of air-fuel mixture. To ensure a well-mixed and uniform mixture, the carburetor also has the effect of atomizing the fuel to ensure the machine operates normally. Carburetor Cleaner: Carburetor cleaner is corrosive and suitable for removing oil stains and carbon deposits from the metal surfaces of various components and individual parts. Its primary use is to clean residual oil stains and dirt inside automotive carburetors.
20
5
Share

Is a car water temperature of over 90 degrees normal?

When a car is running normally, the ideal temperature range is between 70-90°C. If the temperature exceeds 90°C and remains high, it indicates abnormal engine operating conditions. A car engine requires a certain operating temperature for normal functioning, and temperatures that are too high or too low are detrimental to the engine's normal operation and performance. Below is an introduction to issues related to high vehicle water temperature: 1. Causes: Common causes include damage to electronic components in the cooling system (such as the thermostat or cooling fan), poor radiator performance, or insufficient coolant. 2. Prevention methods: Regularly clean the car's cooling system. During routine maintenance, it is recommended that car owners clean the cooling system regularly (especially before summer). Dust and debris accumulated over time on the radiator can affect its cooling performance. It is best to conduct a comprehensive inspection of the entire cooling system, including the thermostat and electric fans, to eliminate potential faults.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.