Where is the Cabin Air Filter of Haval H2S Located?

2 Answers
StJackson
07/29/25 3:54am
The cabin air filter of Haval H2S is located in the glove compartment in front of the front passenger seat. Regular cleaning of the cabin air filter can extend its service life, which depends on the vehicle's usage, driving environment, and seasonal climate. If the air conditioning is frequently used or the road conditions are particularly dusty, it is recommended to replace the filter twice a year or shorten the replacement cycle appropriately. The Haval H2S is a compact SUV under the Haval brand. The vehicle has a length, width, and height of 4195mm, 1772mm, and 1617mm respectively, with a wheelbase of 2550mm. It is equipped with a 1.5T engine that delivers a maximum power of 150 horsepower and a peak torque of 210 Nm, paired with either a 6-speed manual or 7-speed dual-clutch transmission.
Was this review help?
14
2
Share
GeorgeMarie
08/12/25 7:41am
The location of the Haval H2S's cabin air filter is very clear—it's inside the glove compartment under the dashboard on the passenger side. I own this model myself, and every time I replace it, I start by opening the glove box. Sometimes, I need to press or twist the clips on both sides to fully remove the glove box, and then I can see the square filter compartment cover. Unscrew the cover, and the old filter is right inside. Just swap in a new one, and the whole process usually takes less than five minutes. Honestly, the placement is quite thoughtful, designed for easy operation, so you don’t even need to visit a repair shop to get it done. The cabin air filter is responsible for purifying the air. If left unchanged for too long, accumulated dust can lead to strong odors in the car and even affect health. I recommend checking it once a year or every 10,000 kilometers, especially in areas with poor air quality. Opting for an activated carbon filter is even better—it absorbs odors, keeping the car fresher during long drives.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

How Many Points Can Be Reduced Through Traffic Law Learning?

The maximum points that can be reduced through traffic law learning within one scoring cycle is 6 points. According to Article 5 of the "Notice on the Work Standards for Reducing Points of Road Traffic Violations by Accepting Traffic Safety Education (Trial)" issued by the Ministry of Public Security on January 14, 2020 (Public Traffic Management [2020] No. 14): Motor vehicle drivers who apply to participate in traffic safety education to reduce points for traffic violations must participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public activities according to their highest permitted driving model and meet the relevant requirements to apply for point reduction. Point reduction through learning is a measure for drivers holding a driver's license who have been penalized with points due to traffic violations. After participating in online traffic safety learning and passing the examination, their points can be reduced. This is a convenient measure for traffic management uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Specific precautions are as follows: Applicable groups: Motor vehicle drivers with a driver's license of the People's Republic of China, regardless of the permitted driving model or whether they are commercial vehicle drivers, can participate in point reduction through learning. They must participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations according to their highest permitted driving model. Specific rules: Motor vehicle drivers participating in online road traffic laws, regulations, and related content learning must study continuously for 5 minutes each time, accumulate 30 minutes of study time within 3 days, and then register for the examination within 7 days. Passing the examination can reduce 1 point. Drivers can also attend on-site learning, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for the examination. Passing the examination can reduce 2 points. Cases not accepted: Under any of the following circumstances, the application will not be accepted: The driver had more than two full-point records in the previous scoring cycle. Within a 3-point cycle, the driver was involved in hit-and-run accidents, drunk driving, or the manufacture or alteration of documents or license plates. The driver's license is in the probation period or has not been reviewed as required. The driver has unprocessed traffic violation records. The driver has a motor vehicle under their name with an expired safety technical inspection or not deregistered as required. The driver has already reduced the maximum 6 points within the cycle.
17
5
Share

What is the wading depth of a Wrangler?

The wading depth of a Wrangler is 762mm. When driving through water, ensure the vehicle maintains a low speed and constantly monitor the water depth. For manual transmission models, it is advisable to use first gear, maintain steady throttle control for a smooth passage. Automatic transmission models should engage forced low gear or snow mode to increase vehicle torque and prevent tire slippage, avoiding abrupt driving maneuvers and stalling midway. Below are additional details: Intake height: Red high-risk zone. The aforementioned are theoretical wading depths; in actual wading scenarios, factors such as vehicle speed and the influence of surrounding vehicles can alter these theoretical values, so relying solely on the above standards is insufficient. Correct wading method: Ensure the vehicle maintains a low speed and constantly monitor the water depth. For manual transmission models, use first gear, maintain steady throttle control for a smooth passage. Automatic transmission models should engage forced low gear or snow mode to increase vehicle torque and prevent tire slippage, avoiding abrupt driving maneuvers and stalling midway. After exiting the water, apply the brakes several times in succession to quickly evaporate moisture from the brake discs, ensuring optimal braking performance. Water-induced stalling: If the vehicle stalls due to water ingress while wading, remain calm and immediately turn off the ignition. Do not attempt to restart the engine, as this can cause significant damage and may void insurance coverage. Quickly disconnect the negative terminal of the battery to prevent electrical short circuits in the vehicle's electronics. Then arrange for a tow truck and contact your insurance provider.
2
5
Share

When will the VF11 be launched?

Geely VF11 was launched at the end of 2018. The following are the relevant configurations of the Geely VF11: 1. Exterior: The overall design largely continues the concept car's styling released earlier. Although some details have been toned down, the overall appearance is more attractive than the concept car, or more in line with current aesthetic preferences. The ripple-pattern grille is integrated with the headlight assembly, forming a large V-shaped design that looks exquisite and aesthetically pleasing. The floating roof and the small notch design at the D-pillar give the side profile a very sleek appearance, distinctly different from the rounded Song MAX. 2. Rear section: The taillights of the new car are nearly triangular in shape, connected by a chrome strip in the middle, giving a clean and simple look. The lower part of the bumper features a two-tone design, with a black plastic panel at the bottom, complemented by chrome strips and a silver skid plate. Notably, the rear of the car bears the 'VF11' badge, which is the internal code name of the vehicle, with an official name to be announced in the future. 3. Powertrain: The pure gasoline version is equipped with a 1.5T engine (model JLH-3G15TD) with a maximum power of 177 horsepower. The plug-in hybrid version features a plug-in hybrid system consisting of a 1.5T engine, an electric motor, and a ternary lithium battery pack, with a declared combined fuel consumption of 1.7L/100km.
12
2
Share

How often should the air filter of the Tiguan be replaced?

According to the maintenance manual of the Tiguan, the air filter should generally be replaced every 10,000 to 20,000 kilometers or during every other maintenance session. However, it is recommended to clean the air filter every 5,000 kilometers to reduce the formation of throttle sludge. The location of the air filter in a car depends on the intake system and the engine structure. It is usually located in the air filter housing on the engine intake pipe. There are two types of air filters in cars: dry and wet. Dry filters are made of paper or organic materials, while wet filters are made of metal mesh. The function of the air filter is to remove particulate impurities from the air, ensuring that a sufficient amount of clean air enters the cylinders and preventing airborne dust from being sucked into the engine, which can accelerate wear on the piston group and cylinders. Air filter: It is a type of filter, also known as an air filter cartridge, air cleaner, or air element. It is mainly used in engineering vehicles, automobiles, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. During operation, the engine draws in a large amount of air. If the air is not filtered, airborne dust particles can enter the cylinders, accelerating wear on the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe cylinder scoring, especially in dry and sandy working environments. The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles, ensuring that sufficient and clean air enters the cylinders. Using a dirty air filter while driving can cause insufficient air intake into the engine, leading to incomplete fuel combustion. This results in unstable engine operation, reduced power, and increased fuel consumption. Therefore, it is essential to keep the air filter clean. The automobile air filter is a device that removes particulate impurities from the air. It consists of one or several filter components that clean the air. Its main function is to filter out harmful impurities from the air before it enters the cylinders, reducing early wear on the cylinders, pistons, piston rings, valves, and valve seats. Therefore, air must pass through the fine filtration of the air filter before entering the cylinders. A dirty air filter can cause poor engine performance, excessive fuel consumption, and engine damage. When inspecting the air filter, if the dust accumulation is minimal and the blockage is light, it can be cleaned by blowing compressed air from the inside out and reused. A heavily soiled air filter should be replaced promptly.
1
1
Share

Where is the sunroof drain hole located on the Mistra?

The sunroof drain holes on the Mistra are located at the four corners of the sunroof. When water enters the sunroof channel, it flows toward these drain holes and is then directed outside the vehicle through drain tubes. To locate the drain holes, you need to open the sunroof. Inside each drain hole, there is a tube that allows water from the sunroof to flow to the underside of the car. Sunroof drain outlets are generally well-hidden, and their positions vary depending on the vehicle model. If the sunroof is leaking, it's important to check whether the drain outlets are clogged with dust. Under normal circumstances, you should investigate the cause of the leak, which could be due to one of the following three reasons: 1. The sunroof drain outlet is blocked by debris, preventing rainwater from draining and causing it to seep into the cabin. The solution for this issue is relatively simple: clear the sunroof drainage channel. Typically, you can open the sunroof, pour some water into the channel, and check if water flows out from under the front tires. If water flows out, it indicates the drain outlet is clear. Alternatively, you can use a towel to clean the drain outlet, ensuring rainwater drains properly to the ground. 2. The sunroof seal is damaged, compromising the edge seal and allowing rainwater to enter the cabin. To address this issue, you need to replace the sunroof seal. This process is quite complex, as it requires removing both the front and rear sunroof glass panels and carefully adhering the new seal around the edges of the sunroof. This task requires a certain level of technical skill. 3. There are gaps in the sunroof frame, allowing rainwater to seep into the cabin. This usually occurs during heavy rain. Fixing this issue is highly complex. One solution is to apply sealant to the sunroof frame, but this is quite challenging. If the vehicle is still under warranty, the most straightforward solution is to replace the sunroof frame. This is a very involved process, typically taking a professional technician about three days to complete. However, once the sunroof frame is replaced, the leaking issue should be resolved.
6
5
Share

What is the fuel consumption of the MG 5?

The MG 5 currently has 7 models on sale. Among them, the 2021 180DVVT manual Youth Fashion Edition and Luxury Edition are equipped with a 120-horsepower engine, with an NEDC fuel consumption of 5.6L/100km. The 2021 180DVVT CVT Youth Fashion Edition and Luxury Edition, also equipped with a 120-horsepower engine, have an NEDC fuel consumption of 5.7L/100km. The 2021 300TGI DCT Youth Luxury Trend Edition, Flagship Edition, and Premium Enjoyment Edition, equipped with a 173-horsepower engine, have an NEDC fuel consumption of 5.9L/100km. The fuel tank capacity of the MG 5 is 45L. The distance each model can travel on a full tank of fuel is as follows: 2021 180DVVT manual Youth Fashion Edition average fuel consumption: 6.37L/100km. 2021 180DVVT CVT Youth Fashion Edition average fuel consumption: 8.85L/100km. 2021 180DVVT manual Youth Luxury Edition average fuel consumption: 6.85L/100km. 2021 180DVVT automatic Youth Luxury Edition average fuel consumption: 8.03L/100km. 2021 300TGI automatic Youth Luxury Trend Edition average fuel consumption: 7.81L/100km. For models equipped with a 173-horsepower engine, the distance that can be traveled on a full tank of fuel is 45/5.9*100=762km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when approaching a red light, will increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up the car, which also increases fuel consumption.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.