Where is the cabin air filter of GAC Trumpchi GS5 located?

What does the yellow exclamation mark in Audi A4 mean?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. Below is a detailed introduction to the exclamation mark warning light: General faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a malfunction in the transmission or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle. This represents a warning for the brake system, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure abnormality: A horizontal line with parentheses below and an exclamation mark in the middle. This represents the tire pressure monitoring warning light. When the car's tire pressure is too low, this warning light will illuminate. Check the car's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a fault in one of the car lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-inspection, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily use of the vehicle, the warning lights displayed on the vehicle dashboard are divided into two different colors: yellow and red: Yellow indicates a fault in the corresponding system, but the problem is not very serious. Reduce speed and proceed to the nearest repair point for maintenance to eliminate potential safety hazards in a timely manner. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over immediately and seek professional assistance to prevent unpredictable dangers to the vehicle and personal safety from forced driving. It is important to note that when the car is started, all lights will illuminate, and the system will perform an automatic check. After the check is completed, the lights will automatically turn off. If a light does not illuminate when the ignition is turned on, remains lit without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection and elimination of safety hazards.

4

0

Share

How to Adjust the Time on CRV?

The method to adjust the time on Honda CRV is as follows: 1. Press the vehicle's one-touch start button to power on the vehicle. 2. Press the menu toggle button on the left side of the multifunction steering wheel to access the time adjustment function. 3. Use the res and set buttons on the right side of the multifunction steering wheel to adjust the time display. 4. Press the enter button on the left side of the multifunction steering wheel to confirm the time settings. Introduction to Honda CRV: 1. Body dimensions: The length, width, and height are 4550mm, 1820mm, and 1685mm respectively, with a wheelbase of 2620mm. 2. Safety features: Equipped with SRS dual airbags, door beams, front and rear 3-point ELR seat belts, seat belt reminders, and a seat safety system with pretensioners and load limiters.

8

3

Share

How to reset the tire pressure on an Audi A3?

Audi A3 tire pressure reset method is as follows: 1. Press the "CAR" button below the gear lever, then click the blank button at the bottom left of the knob; use the knob to select the "Maintenance and Inspection" option. 2. The screen will pop up a list of options, select "Tire Pressure Monitoring System", then click "Store Tire Pressure"; when two options appear on the screen, choose "Yes, Store". 3. Additional information: The Audi A3's tire pressure monitoring system is a built-in passive sensing type. When issues occur, the dashboard will display a warning but won't show specific values - you'll only see the tire pressure warning light illuminate.

20

5

Share

How to Replace the Air Filter in a Ford Kuga?

Steps to replace the air conditioning filter in a Ford Kuga: 1. The air conditioning filter is located inside the glove box; you need to release the glove box fasteners before replacing it. 2. Push the white clips on both sides of the glove box upwards simultaneously, and the glove box will then come loose. 3. After removing the glove box, open all the clips on the air filter box to access the old air conditioning filter. 4. If the filter surface is too dirty or partially damaged, it needs to be replaced with a new one. If there is only some dust on the surface, tapping it lightly can allow for continued use. 5. When installing the new filter, ensure the side with the letters faces outward; this string of letters indicates the correct orientation.

2

4

Share

How often should the brake pads of an Audi Q5 be replaced?

Audi Q5 brake pads need to be replaced every 40,000 kilometers, or inspected during maintenance, and replaced if excessively worn. Introduction to brake pads: 1. Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking depends decisively on the brake pads. 2. Brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored with an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating meets quality standards. The heat insulation layer is made of non-heat-conductive materials to provide thermal insulation. The friction block consists of friction materials and adhesives, which are pressed against the brake disc or brake drum during braking to create friction, thereby slowing down or stopping the vehicle.

6

2

Share

What Causes a Diesel Vehicle to Emit White Smoke and Fail to Start?

Here are the reasons why a diesel vehicle may have difficulty starting and emit white smoke: 1. Low engine temperature: If white smoke appears during startup in winter, it is usually due to the engine temperature being too low and not yet reaching optimal condition; 2. Water in the fuel supply system: If you place your hand behind the exhaust pipe and water droplets form on your hand when the white smoke passes over it, it indicates the presence of water in the fuel supply system; 3. Low air pressure in the engine cylinders: If the engine emits white smoke at low temperatures and black smoke when the temperature rises, it suggests that the air pressure in the engine cylinders is too low; 4. Low fuel injection pressure: If the engine emits grayish-white smoke and the vehicle lacks acceleration power after starting, it indicates that the pressure in the fuel injection system is too low.

5

Share

Where is the cabin air filter of GAC Trumpchi GS5 located?

What does the yellow exclamation mark in Audi A4 mean?

How to Adjust the Time on CRV?

How to reset the tire pressure on an Audi A3?

How to Replace the Air Filter in a Ford Kuga?

How often should the brake pads of an Audi Q5 be replaced?

What Causes a Diesel Vehicle to Emit White Smoke and Fail to Start?

Does the 2021 14th-generation Sylphy have a particulate filter?

Who is at fault in a collision caused by cutting in line?

Are the Audi A4 and Passat in the same class?

Where to Add Windshield Washer Fluid in a Corolla?