Where is the cabin air filter of Dongfeng Fengxing X5 located?

1 Answers
LaAniyah
07/29/25 8:51pm
The cabin air filter of Dongfeng Fengxing X5 is located in the engine compartment, covered by a rectangular cover plate. Remove the cover plate to see it. The car's air conditioning system has the following four functions: 1. It can control the temperature inside the car, providing a comfortable environment for the driver and passengers. 2. It can draw in fresh air for ventilation. 3. It can remove moisture from the car. 4. It can filter dust and impurities from the air, purifying the interior environment. Additional information: When using the car air conditioning daily, avoid keeping it on for extended periods without opening the windows, as this can lead to carbon monoxide poisoning for the occupants. Every 20,000 kilometers, the air conditioning system should be checked to prevent blockages that could reduce its cooling and heating efficiency.
Was this review help?
2
1
Share
More Forum Discussions

What material is the original spark plug of the Baojun 510?

The original spark plug of the Baojun 510 is made of nickel alloy. Introduction to spark plugs: A spark plug is a crucial component of the ignition system in gasoline engines. It introduces high voltage into the combustion chamber and generates a spark by jumping across the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. It mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell, with the side electrode welded to the shell. Working principle of spark plugs: Under high voltage, the air between the center electrode and the side electrode of the spark plug rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties.
1
0
Share

Why is the engine noise of BMW 320li very loud?

The reasons and solutions for the loud engine noise of BMW 320li are as follows: Poor fuel quality: When the car uses poor quality fuel, the combustion condition inside the engine will deteriorate, causing the engine to vibrate and produce noise. Replacing it with high-quality fuel can solve this problem. Loose engine mounts: Since the engine inside the engine compartment relies on components like engine mounts for support and fixation, if these parts become aged or loose, the engine will move during operation, resulting in noise. To solve this issue, simply tighten the engine mounts. Moving plastic parts: It could also be due to moving plastic parts inside the engine compartment, such as the engine cover or intake pipe. Once these plastic parts become loose, they will collide with the engine compartment, thereby generating noise.
12
3
Share

What does 'off' mean when displayed on a car?

When 'off' is displayed on a car, it refers to the Vehicle Stability Control (VSC) system, also known as the Anti-Skid Control System. This is an active safety system in automobiles that enhances vehicle handling safety and driving convenience. The 'off' light indicates that the vehicle's stability control system is either turned off or malfunctioning. The function of the Vehicle Stability Control System is to quickly detect and take appropriate braking measures in emergency situations such as sharp turns, sudden acceleration, or hard braking. It controls each tire individually while reducing engine output to maintain vehicle stability. Features of the Vehicle Stability Control System include: 1. Real-time monitoring of the driver's control actions; 2. Actively adjusting the engine throttle and speed, modifying wheel driving and braking forces, and correcting oversteering or understeering; 3. When the driver operates improperly or encounters abnormal road conditions, the system will alert the driver with a warning light.
15
3
Share

What is the method for cleaning a three-way catalytic converter?

Cleaning a three-way catalytic converter involves the following steps: 1. Start the engine and let it run until the water temperature is normal, then turn off the engine; 2. Pour the cleaning solution into a specialized device, and connect the device's output connector to the vacuum tube; 3. Start the engine again, maintaining the speed at around 2000 rpm, then open the flow control valve to slowly drip the cleaning solution into the intake manifold; 4. After cleaning, keep the engine running for 3 to 5 minutes. The reasons for cleaning a three-way catalytic converter are: 1. Sulfur and phosphorus in gasoline form chemical complexes on the surface of the converter; 2. Heavy urban traffic with frequent stops and starts leads to incomplete fuel combustion, which deposits on the converter's surface; 3. Carbon deposits and particles from cleaning the fuel injectors, throttle body, or intake manifold can contaminate the three-way catalytic converter.
9
0
Share

What are the dimensions of the GLC?

The dimensions of the GLC are 4765/1898/1648mm, with a wheelbase of 2973mm. Exterior dimensions: In terms of exterior, the Mercedes-Benz GLC200L remains consistent with the current model. The new car measures 4661/1898/1664mm in length, width, and height, with a wheelbase of 2873mm. The front and rear proportions of the body remain harmonious and natural, while the overall lines, which tend to be sharp and robust, give the GLC200L a very sporty appearance. Historical background: The world's first traffic light appeared in Parliament Square in London, installed in 1868. The world's first automobile was invented by German Karl Benz, and the first car appeared in 1886.
6
5
Share

What is the adjustment method for xenon headlight focus?

Xenon headlight focus adjustment method: Remove the screws of the xenon headlight assembly, then detach the bulb clip. After turning on the headlight, move the bulb upward and check against a wall to ensure the focal point is slightly above the cutoff line. Xenon headlights have high brightness, measured in lumens—the higher the lumen value, the brighter the light. Xenon lamps, also known as high-intensity discharge (HID) lamps, are metal halide lamps. They work by filling an ultraviolet-resistant quartz glass tube with various chemical gases, including xenon and other inert gases. A ballast then boosts the vehicle's 12-volt power supply to 23,000 volts instantaneously. Under this high voltage, xenon gas is ionized, creating a light source between the two electrodes.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.