Where is the Cabin Air Filter of Baojun 530 Located?

2 Answers
StNaomi
07/25/25 9:16am
The cabin air filter of Baojun 530 is installed at the footwell of the front passenger seat, positioned inward near the left foot area. When replacing the cabin air filter, ensure the blower motor is turned off and choose an unobstructed location to prevent accidents. Refer to the owner's manual for filter specifications and required tools. Below are the functions of the cabin air filter: 1. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc. from the air. 2. Provides strong and lasting moisture absorption to prevent windshield fogging, ensuring clear visibility and driving safety. 3. Supplies fresh air to the cabin, protecting occupants from harmful gases and enhancing driving safety. 4. Effectively sterilizes and deodorizes, maintaining clean cabin air and preventing bacterial growth for a healthier environment. 5. Efficiently filters solid impurities like dust, pollen, and abrasive particles from the air.
Was this review help?
10
2
Share
VonPaige
08/11/25 7:14pm
To locate the cabin air filter on the Baojun 530, you'll need to access the passenger side. First, empty the glove compartment and open it. Press the clips on both inner sides inward simultaneously to release the entire glove box. Behind it, you'll spot a roughly palm-sized rectangular cover – that's the filter housing. Pry open the retaining clips with your fingernail or a small tool, and you'll find the dusty square filter inside. DIY replacement is straightforward: order a new one online for around 20 yuan, ensuring the arrow points toward the interior. As a seasoned driver, I recommend changing it every 8,000 km or when you detect musty odors – otherwise you'll be breathing dust and pollen. Last maintenance showed the mechanic completing this in three minutes; the location is cleverly concealed but not hard to find.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

How to Open the Car Window with the Key for the Sylphy?

There is a one-touch window lift button on the side of the driver's door. The remote key for the Sylphy has functions such as tailgate opening, unlocking, and locking. The fuel tank opening function button for the Sylphy.
8
2
Share

How to properly start an Audi A3 automatic transmission car?

Press the brake to start the car, and continue to hold the brake after the engine starts. Automatic transmission cars do not have a clutch, mainly relying on the accelerator and brake. Shift the gear from P to D, release the handbrake, slowly lift the brake pedal, and gently press the accelerator to start.
4
5
Share

How to Remove Yellow Stains from Leaves on the Car?

Rinse the area with tree sap using water to prevent the paint from being scratched by sand particles during wiping. Soak a towel in hot water and place it over the area with tree sap. Once the sap melts, it can be wiped off. If hot water doesn't work, pour some white vinegar, soapy water, or alcohol solvent onto a cloth and wipe the affected area. The sap will decompose and can be easily removed.
20
3
Share

How to Connect the Wiring for Motorcycle Ignition?

Magnetic stator ignition coil, connect to the two-pin socket of the igniter. The blue-white and green-white wires are the stator trigger coil, which connect to the four-pin socket of the igniter. The red and yellow wires are the lighting coil, connected to the rectifier. The igniter has a total of two wires that need to be connected, while the rest are plugged in.
1
5
Share

Can Training Vehicles Operate Normally on Public Roads?

Training vehicles can operate normally on public roads. There are two scenarios for training vehicles on the road: instructional and non-instructional use. 1. Non-instructional use: As long as the training vehicle complies with relevant motor vehicle management regulations such as registration and licensing, and the driver possesses a valid driver's license, it can be used like any ordinary motor vehicle. 2. Instructional use on the road: The training vehicle must be equipped with a secondary brake, and a certified driving instructor must accompany the student during road practice. Any traffic violations or accidents that occur during this period will be the responsibility of the instructor. Additional information: 1. Instructional road sections typically have less traffic and complete signage. Other vehicles passing through these sections should exercise extra caution to reduce the likelihood of accidents. 2. Refrain from practicing driving on non-designated roads. 3. When passing through instructional road sections, other vehicles should drive carefully, maintain a safe distance, and patiently wait if encountering a training vehicle turning, making a U-turn, or stalling, ensuring safety. 4. If you observe a training vehicle practicing on non-designated roads, you can report it to the traffic police or transportation management authorities via their hotline, and the relevant departments will handle the situation promptly.
12
5
Share

Should You Press the Brake or Shift to Neutral When Stopping at a Red Light with an Automatic Transmission?

When encountering a red light with an automatic transmission, the parking methods are: 1. For short red lights, you can directly press the brake pedal; 2. For long red lights, shift to N (Neutral) and engage the handbrake. Driving precautions for automatic transmissions include: 1. Accelerate gently when starting, and shift into P (Park) or N (Neutral) when starting the car—do not coast in neutral; 2. Shift back to N (Neutral) when stopping at a red light or briefly parking, and shift into P (Park) when parking; 3. Do not shift into P (Park) while driving; 4. When reversing, ensure the vehicle is completely stopped before shifting into R (Reverse). The steps for starting an automatic transmission car are: 1. Insert the key and turn it to the second ignition position (power-on mode), then wait for the system to complete self-inspection; 2. Shift the gear lever from P (Park) to N (Neutral); 3. Release the brake and start the engine; 4. Press the brake pedal, shift the gear lever from N (Neutral) to D (Drive), release the brake, and press the accelerator to start moving.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.