Where is the cabin air filter located on the Roewe 550?

1 Answers
EliasAnn
07/29/25 7:17pm
The cabin air filter of the Roewe 550 is located behind the engine compartment sealing strip. The steps to replace the cabin air filter are as follows: 1. Remove the clips of the sealing strip and pull the strip from left to right. 2. Then unscrew the screws at this position (one on each side). 3. Next, you will see the cabin air filter. 4. Grip the retaining strip and gently pull to remove the old filter. 5. Install the new cabin air filter (pay attention to the correct installation direction). The functions of the cabin air filter: 1. Filter dust particles from the air to prevent these pollutants from entering the car's evaporator and causing sludge buildup that could block it. 2. Filter dust, mist, pollen, carbon oxides, and sulfides from the air, as the filter contains activated carbon to adsorb harmful gases and particles.
Was this review help?
20
4
Share
More Forum Discussions

How to Use Lights When Entering a Highway Ramp?

Before entering the ramp, you should turn on the right turn signal. Before merging onto the highway from the ramp, you should turn on the left turn signal. When driving on the road, it is essential to use lights correctly, as this can enhance safety during the journey. Here are some relevant details: 1. When driving on urban roads, do not use high beams, as this can impair the vision of oncoming drivers and the drivers ahead. 2. When driving on urban roads, you can alternately switch between high and low beams when approaching pedestrian crossings to alert pedestrians. 3. When changing lanes or making turns, you should activate the turn signals in advance. 4. When driving on rural roads or highways without streetlights, you can use high beams. However, as a courtesy, you should switch to low beams when encountering oncoming vehicles. 5. Among the vehicle's lighting systems, brake lights and turn signals are more prone to malfunction. It is recommended that drivers regularly check the operational status of these lights. Brake lights are particularly important—when the driver presses the brake pedal, the brake lights illuminate, alerting the following driver to maintain a safe distance and prevent rear-end collisions. If the brake lights are not working, the following driver may easily collide with your vehicle, which is very dangerous.
2
4
Share

What is the fuel tank capacity of the Nissan Kicks?

The 2022 Nissan Kicks comes in 3 models, all with a fuel tank capacity of 41L. The vehicles are equipped with a 1.5L naturally aspirated engine and a 6-speed continuously variable transmission (CVT). All models feature front-wheel drive. In the same class, the 2020 Song PLUS has a fuel tank capacity of 60 liters, while the 2021 Trax has a 40-liter fuel tank. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety level, with additional space from the safety level to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the calibrated capacity. Methods to open the fuel tank: Mechanical key: Typically found in some rugged off-road vehicles, this method is less common in regular household cars due to its relative complexity. In-car switch: The location of the in-car fuel tank switch varies by model. It may be on the floor to the left of the driver's seat, on the left front door panel, or on the center console, usually marked with a fuel pump icon. Note that using the in-car switch can sometimes lead to forgetting to turn off the engine before refueling, so always remember to turn off the engine before refueling. Press-to-open: This is currently the most convenient method. After parking, the fuel attendant can simply press to open the fuel tank door. However, when not refueling, remember to lock the central control to prevent the fuel tank cap from being opened.
17
2
Share

How to Replace the Battery in a Lamando Key?

To replace the battery in a Lamando key, follow these steps: 1. Eject the mechanical key from the key fob. 2. With the logo facing upwards, use a flathead screwdriver or a similar flat, hard tool to insert into the mechanical key slot. 3. Apply force to rotate the tool left and right to unscrew the plastic cover of the key. 4. Once the plastic back cover is pried open, you will see the battery inside. Remove the old battery, install the new one, and then reattach the plastic back cover. Note: After completing the battery replacement, test all the buttons on the key. If they all respond, it means the battery replacement was successful.
14
1
Share

What is the fuel consumption of the Passat?

The combined fuel consumption of the Passat is 5.8-6.7L/100km. There are currently 10 models of the Passat on sale. The 280TSI Business Edition and Elite Edition have a combined fuel consumption of 5.8L/100km. The 330TSI Elite Edition, Starry Sky Elite Edition, Luxury Edition, Starry Sky Luxury Edition, Starry Sky Premium Edition, and Premium Edition have a combined fuel consumption of 6.3L/100km. The 380TSI Luxury Edition and Flagship Edition have a combined fuel consumption of 6.7L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test cycle. The actual fuel consumption is higher than these values, ranging from 8.0-9.1L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive carbon deposits in the engine are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates a significant amount of carbon deposits in the engine. In this case, the vehicle must be taken to a 4S shop for professional cleaning of the engine carbon deposits by technicians. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor primarily monitors the air-fuel ratio of the engine. Once it is damaged, it will cause an imbalance in the air-fuel ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gases during driving, and the oxygen sensor should be replaced immediately. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in vehicles with long service lives, various faults may inevitably occur.
15
3
Share

What is the reason for the thumping sound when the car is running?

The reason for the thumping sound when the car is running is: If the sound changes with the vehicle speed and has a periodic rhythm, it is likely caused by abnormal noises from rotating components such as wheels or the drive shaft. It is important to thoroughly inspect the wheels, drive shaft, and other rotating parts for any abnormalities and to check if there is any interference with surrounding fixed components. The drive shaft is a high-speed rotating body with minimal support, so its dynamic balance is crucial. Typically, drive shafts undergo dynamic balance testing before leaving the factory and are adjusted on a balancing machine. For front-engine, rear-wheel-drive vehicles, the drive shaft transmits the rotation from the transmission to the differential. It can consist of multiple sections connected by universal joints.
13
0
Share

What are the color options for the Mazda CX-4?

Mazda CX-4 offers six color choices: Phantom Silver, Soul Red Crystal, Pearl White, Deep Crystal Blue, Brown, and Starry Blue. Below is an introduction to the Mazda CX-4: 1. In terms of configuration, the new CX-4 has undergone certain upgrades. The central control LCD screen has been increased from 7 inches to 8 inches, high-end models are equipped with BOSE audio, the i-ACTIVSENSE intelligent safety system adds 360-degree panoramic video monitoring, AEB pedestrian detection, and the new MZDCONNECT Mazda Connect system integrated with smart connectivity. 2. In terms of power, the new CX-4 still comes with 2.0L/2.5L engines, with maximum power outputs of 116kW (158PS) and 141kW (192PS) respectively, and peak torques of 202N.m and 252N.m, paired with a 6AT transmission, meeting the China VI emission standards.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.