Where is the cabin air filter located on the Lynk & Co 03?

1 Answers
HazelAnn
07/30/25 6:18am
The cabin air filter of the Lynk & Co 03 is located inside the glove compartment in front of the passenger seat. Below are the steps for replacement: 1. Open the glove compartment in front of the passenger seat and remove all items inside. 2. Press the plastic clips inside the glove compartment to remove the upper black cover panel. 3. After removing the black cover panel, you will see the cabin air filter cover inside. 4. Press the plastic clips on both sides of the cabin air filter cover to remove it. 5. Once the cabin air filter cover is removed, the cabin air filter will be visible. Replace it with a new one, then reassemble everything in reverse order following the glove compartment panel removal sequence. This completes the entire process of replacing the cabin air filter on the Lynk & Co 03.
Was this review help?
7
0
Share
More Forum Discussions

Is Cleaning the Catalytic Converter Effective?

Cleaning the catalytic converter is effective. The catalytic converter is an emission control device in the engine, and its proper functioning determines the engine's fuel consumption, power, emissions, and other working conditions. If it becomes clogged or malfunctions, the exhaust emissions will exceed the standard, and the vehicle will fail the annual inspection. Additionally, it can affect the engine's performance, often manifesting as increased fuel consumption, reduced acceleration, abnormal exhaust noise, and unpleasant exhaust odors. Cleaning intervals for the catalytic converter: 1. Typically, the catalytic converter should be cleaned every 30,000 kilometers; 2. If you notice increased fuel consumption or reduced power, inspect and clean the catalytic converter as needed; 3. Whenever the fuel injectors, throttle body, or intake system are cleaned, the catalytic converter can also be cleaned; 4. Before the annual vehicle inspection, it is advisable to clean the catalytic converter to ensure passing the emissions test.
4
5
Share

Where is the Central Control Box of Wuling Hongguang Located?

The central locking system of the Wuling Hongguang is located below the steering wheel and can be seen by looking down. The full name of the central locking system is Central Control Door Lock, which is an automotive accessory. It allows remote opening and locking of doors without inserting the key into the lock. The system consists of a door lock switch, an actuator, and a controller. The main functions of the central locking system are as follows: Central Control: When the driver locks the door beside them, all other doors are simultaneously locked. The driver can open all doors via the door lock switch or open a specific door individually. Speed Control: When the vehicle reaches a certain speed, all doors automatically lock to prevent passengers from accidentally opening the doors by operating the door handles. Individual Control: In addition to the door beside the driver, other doors are equipped with separate spring lock switches, allowing independent control of the opening and locking of each door.
11
5
Share

What is the 0-100 km/h acceleration time of the Malibu XL 2.0T?

The Malibu XL 2.0T has a measured 0-100 km/h acceleration time of 6.7 seconds. Below is the relevant information: Product Features: The 2018 Malibu series is equipped with a 1.5T top-mounted direct-injection turbocharged engine and a 6-speed automatic DSS intelligent start-stop transmission. It adopts Chevrolet's new unified tail badge naming convention and adds the 530T Fashion Edition model. Powertrain: In terms of powertrain, the Malibu is equipped with a 1.5T engine, delivering a maximum power of 125 kW (170 PS). The transmission system features a 6-speed automatic transmission, with a minimum combined fuel consumption of 6.8 L per 100 km.
19
2
Share

Which car models feature a horizontally opposed engine?

Currently, only Japanese automaker Subaru and German manufacturer Porsche offer car models with horizontally opposed engines, though not all vehicles in their lineups feature this engine type. The horizontally opposed engine boasts numerous advantages, primarily its smooth operation, stability, low center of gravity, and enhanced handling. Presently, Porsche equips only the 718 and 911 models with its renowned horizontally opposed engines. The Porsche 718 comes with either a 2.5T or 2.0T four-cylinder horizontally opposed turbocharged engine, both paired with a 7-speed dual-clutch transmission. The Porsche 911 offers three horizontally opposed forced induction engine options: 3.0T, 3.8T, and 4.0L. In terms of powertrain configurations, Subaru has long been celebrated for its horizontally opposed engines. Subaru models such as the Forester, Subaru XV, Impreza WRX, Legacy, and Outback all utilize horizontally opposed engines.
8
3
Share

How Long Until a Mini Truck is Scrapped?

Mini trucks have a service life of 12 years. Specific details about vehicle scrapping timelines are as follows: 1. Definition: The vehicle scrapping timeline refers to a safety inspection system based on seating capacity and usage duration during a vehicle's operational period. Regulations state that small and mini non-commercial passenger vehicles, large non-commercial sedans, and wheeled special-purpose machinery vehicles have no usage lifespan restrictions. 2. New Scrapping Standards: For various motor vehicle categories, the regulations specify that mini and small taxi passenger vehicles have an 8-year service life, medium-sized taxi passenger vehicles 10 years, large taxi passenger vehicles 12 years; public transit passenger vehicles 13 years; dedicated school buses 15 years; large and medium non-commercial passenger vehicles (excluding large sedans) 20 years; three-wheeled motorcycles 12 years, and other motorcycles 13 years.
18
0
Share

What to Do When Newly Replaced Wiper Blades Leave Water Marks on the Return Stroke?

Newly replaced wiper blades leaving water marks on the return stroke may be due to impurities mixed on the wiper blades, causing scratches between the blades and the windshield. In this case, it is recommended to clean the wiper blades thoroughly. Another possibility is the presence of foreign substances such as insect residue on the windshield surface, preventing a clean wipe. This requires cleaning the windshield thoroughly before conducting a water-wiping test. Additional information is as follows: 1. Basic Introduction: The technical name for wipers is Windshield Wiper. It is a blade-like structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Its main function is to clear rain, snow, and dust that obstruct the view on the windshield. 2. Wiper Control System: The wiper control system (wiper-control-system) can achieve not only delay control of the wipers through the electronic control system but also some other complex controls. The electronic control system includes a dual-speed motor and two limit switches, allowing the following functions through a handle switch: washing, wiping, high-speed wiping, low-speed wiping, intermittent wiping, and delay control. More complex electronic control systems can also achieve swing adjustment pressure control and rain-sensing control.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.