Where is the cabin air filter located on the Haval H7?

2 Answers
OAurora
07/25/25 5:49am
The cabin air filter of the Haval H7 is located in the footwell area of the front passenger side. The cabin air filter ensures tight sealing against the housing to prevent unfiltered air from entering the vehicle cabin, protecting occupants from inhaling harmful gases and ensuring driving safety. The Haval H7 is a mid-size SUV equipped with a 2.0-liter turbocharged engine across all variants. This engine delivers a maximum power output of 227 horsepower and 385 N·m of torque, with peak power achieved at 5,500 rpm and maximum torque available between 1,800 to 3,600 rpm. The engine is paired with a 7-speed dual-clutch transmission. As a mid-size SUV, the Haval H7 measures 4,700mm in length, 1,925mm in width, and 1,718mm in height, with a wheelbase of 2,850mm. The vehicle features MacPherson strut independent suspension at the front and multi-link independent suspension at the rear.
Was this review help?
8
3
Share
BarrettLee
08/10/25 5:54pm
As a Haval owner for ten years, I must say the H7's cabin air filter location is quite easy to find - it's hidden behind the glove compartment on the passenger side. Just open the glove box, peek inside, and you'll spot a clip or small cover. Remove it to pull out the old filter. It's best to replace this every six months, especially in dusty urban areas. Delaying replacement can reduce airflow and cause odd odors, affecting your family's respiratory health. I always keep a spare filter at home - a quick five-minute DIY job saves money and gives peace of mind. Remember to buy genuine parts to prevent air leaks.
Was this review help?
14
0
Share
Expand All
More Forum Discussions

What Causes the Noise When the Air Conditioner is Idling?

The reasons for the noise when the air conditioner is idling include ignition system failure; poor quality engine oil; excessive carbon buildup or aging of the engine; abnormal fuel supply pressure or incorrect readings from the intake pressure sensor. Cleaning carbon deposits from the fuel injectors: Since the combustion chamber is prone to carbon buildup, which can cause difficulty in starting, carbon deposits on the fuel injectors can also lead to clogged fuel passages, distorted fuel injection, and poor atomization, naturally increasing fuel consumption. When selecting engine oil: It is necessary to strictly follow the engine oil grade specified in the car's user manual. If the same grade is not available, a higher-grade oil can be used, but a lower-grade oil should not be substituted.
7
2
Share

Is it acceptable to park an automatic transmission car in neutral (N) and then turn off the engine?

It is not advisable to park an automatic transmission car in neutral (N) and then turn off the engine. The N gear is the neutral position, which can be used for brief parking. Automatic transmissions do not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The correct parking procedure is as follows: 1. Press the brake to come to a complete stop; 2. Shift the gear from D (drive) to N (neutral); 3. Engage the handbrake and turn off the engine; 4. Release the foot brake, but do not turn off the power, to ensure the car is completely stabilized by the handbrake; 5. Press the foot brake again and shift the gear from N to P (park); 6. Release the foot brake; 7. Turn the key back, switch off the power, and remove the key.
12
5
Share

Can I wax and polish my car by myself?

If you have mastered the knowledge of car polishing and waxing and have the corresponding tools, you can wax your car by yourself. Restore the paint surface: For car paint surfaces that are oxidized, dull, or have scratches, you can remove oxides and corrosive substances to achieve the goal of restoring the cleanliness of the paint surface; Protective effect: Car waxing can protect the car's paint surface, provide gloss to the body, and serve functions such as waterproofing, acid rain resistance, UV protection, anti-static, and polishing. Polishing is a method that uses polishing wax and a polishing machine to remove scratches and rough areas on the car's paint surface. Polishing can grind off the aged paint film, allowing a new paint film to form, restoring brightness. Waxing or glazing after polishing can achieve more ideal results. The main purpose of car waxing is to protect against rain and acid rain.
8
1
Share

How to troubleshoot non-functional brake lights on Hyundai Verna?

Modern Ruina brake lights are not bright troubleshooting method is: 1, check the brake light switch; 2, check the brake light bulb; 3, check the brake light wire harness plug and ground wire. The Hyundai Verna is a compact 4-door 5-seater sedan with body dimensions of 4300mm in length, 1705mm in width, 1460mm in height, and a wheelbase of 2570mm. The Hyundai Verna is equipped with a 1.4L naturally aspirated engine, delivering a maximum power of 70kW and a maximum torque of 132.4Nm. It features a front-wheel-drive layout, with a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.
7
2
Share

What does the 'C' displayed on the dashboard of the Mercedes GLC300 mean?

The 'C' displayed on the dashboard of the Mercedes GLC300 indicates that the vehicle is in Comfort mode. Specific operations: Depress the brake pedal of the Mercedes; Press the one-touch start button of the Mercedes; The instrument panel lights up and the vehicle's power is activated; Press the mode button located inside the Mercedes; At this point, the Comfort mode of the Mercedes can be activated. Comfort mode: This is the most frequently used mode in Mercedes. In this mode, balanced comfort is the most prominent characteristic of the Mercedes, with a steady and gentle performance that is neither rushed nor sluggish. The light and precise steering is particularly adept at low speeds. However, the vehicle's power performance will decrease in this mode.
5
5
Share

What are the causes of severe engine shaking and exhaust smoke?

Engine shaking severely and exhaust smoke causes: White smoke from the car: Due to wear in the engine cylinder's gasket, a certain gap is created, allowing a large amount of coolant from the cooling system to enter the combustion chamber. Water cannot burn and turns into steam when heated, which is directly discharged through the exhaust pipe. Black smoke from the car: In carburetor models, the fuel injection is not controlled by a computer but by the throttle pedal. In some cases, excessive fuel enters the cylinder and is discharged before it can be burned. Blue smoke from the car: Scratches in certain parts, poor piston sealing, or severe wear at the valve.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.