Where is the cabin air filter located on the Great Wall Haval H6?

What does the Volkswagen faulty engine auto start-stop system mean?

Engine auto start-stop is a system that automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving. When it's time to move forward again, the system automatically restarts the engine. Its English name is STOP&START, abbreviated as STT. The STT intelligent fuel-saving system is a set of controls for engine start and stop. Reasons for engine auto start-stop failure: Volkswagen vehicles displaying auto start-stop faults are generally due to insufficient battery power, as auto start-stop vehicles have higher power requirements for the battery, or due to throttle valve faults, etc. When a car experiences an auto start-stop malfunction, it is recommended to seek a mechanic to check the cause as soon as possible to avoid other unnecessary losses. Auto start-stop mainly relies on: Battery capacity. When starting the car, the very high current consumes a large amount of battery power, so cars equipped with the auto start-stop function use high-capacity batteries that can withstand large current impacts. When the battery power is consumed to a certain extent and can no longer continuously provide the huge current required, the auto start-stop will automatically deactivate to protect the battery and maintain its usage cycle. If the auto start-stop still cannot be used after the battery is fully recharged, it means the original battery can no longer meet the ultra-high current demand of the auto start-stop, and a new battery must be replaced.

4

3

Share

What do the 10 functions on the MG ZS dashboard represent?

The dashboard of the MG 6 features ten major warning indicators: engine oil, coolant temperature, handbrake, battery, ABS, seatbelt, engine status, brakes, fuel, and airbag. Engine Oil Indicator: This indicator displays the oil pressure status within the engine. Coolant Temperature Indicator: This indicator primarily shows the temperature of the coolant in the engine. It lights up for a few seconds during vehicle self-inspection and remains off under normal conditions. Handbrake Indicator: A common mistake made by beginners is driving without releasing the handbrake. This indicator is represented by a circled "P" and remains off normally. It lights up automatically when the handbrake is engaged. Battery Indicator: A new car battery typically lasts at least two years, but for used or stock vehicles, this indicator requires early attention. ABS Indicator: If the ABS light does not flash when starting the engine or remains lit afterward, it indicates an ABS malfunction. Seatbelt Indicator: This indicator shows the seatbelt status. Depending on the vehicle model, it may light up for a few seconds as a reminder or stay on until the seatbelt is fastened, sometimes accompanied by an audible alert. Engine Status Indicator: It lights up when the ignition is turned on and should turn off after about 3-4 seconds, indicating normal engine operation. If it doesn't light up or stays lit, it signifies an engine fault requiring immediate inspection. Brake Indicator: This displays the wear of brake discs and the status of the braking system. If it remains lit, the braking system should be checked immediately. Fuel Indicator: When this light comes on, it indicates very low fuel levels, and it's advisable to refuel at the nearest gas station. Airbag Indicator: This indicator shows the operational status of the airbag system. It lights up when the ignition is turned on and should turn off after about 3-4 seconds, indicating normal system function. If it doesn't light up or stays lit, it indicates a system fault.

20

4

Share

Is Wheel Balancing Necessary When Rotating Car Tires?

Wheel balancing is not necessary when rotating car tires. Tire rotation involves swapping the positions of the wheels without altering the mass balance between the tires and rims. Wheel balancing is required when tires are removed from the rims, as this process can disrupt the mass balance between them. An unbalanced wheel may cause severe vibrations during high-speed rotation, which is when balancing becomes necessary. The functions of tires include: 1. Transmitting driving force, braking force, and steering force to enable vehicle control; 2. Supporting the vehicle load; 3. Absorbing shocks and vibrations during driving to prevent damage to automotive components from excessive vibrations.

16

5

Share

What is a Universal Driver's License Like?

The following details the so-called universal driver's license: 1. The commonly referred to as 'universal license' exploits system loopholes by some insiders or intermediary agents to deduct points for multiple traffic violation vehicles indefinitely. 'After multiple upgrades to the police system, such loopholes have been significantly reduced, but some may still slip through the cracks.' 2. The traffic police department explains that both buying and selling points violate Article 60 of the Public Security Administration Punishment Law, which pertains to 'forging, concealing, or destroying evidence, providing false testimony, or falsely reporting cases, thereby affecting the lawful handling of cases by administrative law enforcement agencies. Offenders shall be detained for 5 to 10 days and fined.'

10

5

Share

What should I do when the coolant warning light on the dashboard comes on?

When the coolant warning light on the dashboard comes on, you should promptly add coolant. Here is some relevant information about coolant: 1. If you continue driving with insufficient coolant, it will affect the engine's heat dissipation and potentially damage the engine. 2. Most cars use water-cooled engines, which rely on the continuous circulation of coolant within the engine to dissipate heat. 3. Coolant follows two circulation paths within the engine: one is the major cycle, and the other is the minor cycle. 4. When replacing coolant, always go to a professional shop and use specialized equipment for the replacement.

5

Share

How to solve the P13BA fault code?

P13BA fault code indicates a malfunction in the engine ECU. You can check whether the ECU circuit is normal, inspect the battery charging status unit, battery condition, and whether the power supply network is functioning properly, etc. Here is some information about automotive fault codes: 1. Automotive fault codes are codes that reflect faults analyzed by the vehicle's computer ECU after a malfunction occurs. Generally, common fault codes are caused by sensor malfunctions or poor sensor performance, but some mechanical faults cannot be read by the ECU. 2. The vehicle dashboard will display some basic fault indications, but these are only a small part. The main faults still require the use of specialized equipment—a diagnostic scanner—to be read.

15

4

Share

Where is the cabin air filter located on the Great Wall Haval H6?

What does the Volkswagen faulty engine auto start-stop system mean?

What do the 10 functions on the MG ZS dashboard represent?

Is Wheel Balancing Necessary When Rotating Car Tires?

What is a Universal Driver's License Like?

What should I do when the coolant warning light on the dashboard comes on?

How to solve the P13BA fault code?

Why is the Volkswagen Tiguan's electric fan not working at 105 degrees?

What is the tire model for Tesla's 19-inch wheels?

What are the body dimensions of the new Infiniti QX50?

What Octane Gas Should a Mitsubishi Pajero Use?