
The cabin air filter of the Ford Kuga is situated on the left side of the fuse box under the front passenger seat. You can observe screw holes on the cover, but in reality, no screws are used—it is secured solely by clips on the plastic cover. Gently pry it open with a pry tool to access the cabin air filter. The Ford Kuga is a compact SUV introduced by Ford, with body dimensions of 4585mm in length, 1882mm in width, and 1742mm in height, and a wheelbase of 2710mm. The Changan Ford Kuga is equipped with either a 1.5T or 2.0T engine, delivering maximum output power of 181 horsepower and 245 horsepower, respectively. It is paired with a 6-speed automatic transmission, and the 2.0T model also features a four-wheel-drive system.

After driving my Ford Kuga for three years, I finally discovered that the cabin air filter is hidden behind the glove compartment on the passenger side. To replace the filter, you first need to open the glove box. There are plastic clips on both sides – press them simultaneously toward the center until the entire glove box drops down. Then you'll see a rectangular cover plate, about 20 cm wide, which can be easily pried open to reveal the old filter inside. Remember to check the arrow direction on the filter – the new filter must be inserted with the same orientation, otherwise it will affect airflow. Last time I changed it myself, I couldn't reinstall the glove box properly because the clips weren't aligned correctly, and it took me half an hour to fix it. I recommend wearing gloves during the operation to avoid getting your fingers scratched by the plastic edges.

Last month, I just replaced the cabin air filter in my Ford Kuga. Actually, it's located behind the glove compartment on the passenger side, and the method to access it is quite simple. Fully open the glove box, then firmly squeeze the protruding stoppers on both sides until you hear a click - this allows the compartment to drop down completely. Behind it, you'll find a plastic cover that can be pried open to reveal the filter, which can then be pulled straight out for replacement. However, do note that the filter has a specific orientation - usually the arrow should point toward the rear of the vehicle. Last time I didn't pay attention to the direction, which actually made the AC odor worse. When reinstalling the glove box, make sure the tracks are properly aligned, otherwise it won't close properly. This design isn't very user-friendly, and people with larger hands might find it more challenging.

The air conditioning filter for the Ford Kuga is located behind the glove compartment on the passenger side. To access it, press the plastic limiters on both sides of the glove compartment inward to release them, then lower the glove compartment to reveal the cover panel for the air conditioning filter. Open the panel to remove the old filter. When installing the new filter, pay attention to the orientation of the original filter—most models require the airflow arrow on the filter to point downward or toward the passenger seat. Finally, reassemble the glove compartment following the original steps, ensuring all clips are properly secured to avoid any rattling noises. The recommended replacement interval is no more than 15,000 kilometers.


