Where is the cabin air filter located on the Changan CX30?

2 Answers
JaxonLynn
07/29/25 6:51am
The cabin air filter of the Changan CX30 is located beneath the wiper panel under the engine hood. You'll need to remove the wiper panel to access it. Since this involves wiper removal, it's recommended to have it replaced at a 4S dealership or auto repair shop. Manufacturers generally recommend replacement every 20,000-30,000 kilometers. Here are the functions of the cabin air filter: 1. Ensures tight sealing against the housing to prevent unfiltered air from entering the cabin. 2. Filters out solid impurities such as dust, pollen, and abrasive particles from the air. 3. Adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., with strong and lasting moisture absorption capability. 4. Prevents windshield fogging to maintain driver visibility and ensure driving safety; provides fresh air to the cabin, preventing occupants from inhaling harmful gases and effectively eliminating bacteria and odors. 5. Maintains clean cabin air to prevent bacterial growth and creates a healthy environment; effectively separates solid impurities like dust, core powder, and abrasive particles; efficiently blocks pollen to prevent allergic reactions that could affect driving safety.
Was this review help?
2
4
Share
DelJessica
08/12/25 11:01pm
I remember it was quite a hassle to locate the cabin air filter in my Changan CX30. Typically, the filter is located behind the glove compartment on the passenger side. You'll need to open the glove box and remove it completely—usually secured by a few clips or screws, just gently pry them open. Then, right behind it, there's a small cover over the filter slot. The first time I replaced it, it took me a while to figure out the location. After installing the new filter, the air inside the car became much fresher, and it reduced the risk of the AC system getting clogged. It's recommended to check it every six months to prevent dust buildup from affecting ventilation. You can replace it yourself with some simple tools, saving time and money instead of going to the repair shop every time. Of course, if you're not familiar with the structure, check the car's manual first to avoid damaging any components.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

What Causes the Chain Noise on CFMOTO 250?

Chain noise on CFMOTO 250 is related to insufficient lubrication and wear of the chain. Insufficient Chain Lubrication: If the chain lacks lubrication, it can produce abnormal noises. Generally, chain lubrication is required every 500-700 kilometers of riding. Many riders, in an effort to keep their bikes clean and tidy, do not apply sufficient chain lubricant, leading to excessive wear on the gears and chain. At high speeds, the chain may skip teeth, resulting in various noises. Chain Wear: Aggressive riding can cause wear on the chain and gears, necessitating chain replacement. When replacing the chain, both the front and rear sprockets must also be replaced as they form a complete transmission system. Replacing only the chain may result in mismatched components. Solution: Try adjusting the chain tension and applying chain lubricant yourself. If the issue persists, promptly take the bike to a repair shop for servicing.
10
3
Share

What brand is the Orochi car?

Orochi is the Mitsuoka Orochi, a car from Japan's Mitsuoka Motors. Due to the many records about snakes in Japanese mythology, Mitsuoka Motors boldly adopted the snake theme as the basis for modifying the Mitsuoka Orochi. Power of the Mitsuoka Orochi: The Mitsuoka Orochi uses Toyota's 3MZ-FE 3.3-liter V6 engine (used in the Lexus RX330), with an MR (mid-engine, rear-wheel drive) layout and a 5-speed automatic transmission. It achieves 0 to 400 meters in 15.1 seconds; 0 to 1 kilometer in 28 seconds. Maximum power is 172 kW (233 horsepower), maximum torque is 328 Nm, top speed is 240 km/h, 0-100 km/h acceleration time is 7.2 seconds, and drag coefficient is 0.32. Appearance of the Mitsuoka Orochi: The Mitsuoka Orochi has a very low body, with a highly avant-garde and exaggerated design. The circular taillights and vertical rear windshield, along with the uniquely styled rear spoiler, complement the four exhaust pipes below.
5
0
Share

What are the differences between Chery Tiggo 5 and Chery Tiggo 5x?

Differences between Chery Tiggo 5 and Chery Tiggo 5x are as follows: In terms of appearance: The Tiggo 5x is a brand-new product built on the T1X platform, featuring a bold design that stands out in today's era of severe styling homogenization, attracting significant attention from young consumers; the Tiggo 5, on the other hand, presents a more conservative and stable appearance. In terms of interior: The Tiggo 5x also adopts a more radical approach, with details and configurations that appear more avant-garde, such as the inclusion of USB ports in both front and rear rows; the Tiggo 5, in contrast, is more restrained and minimalist. In terms of powertrain: The Tiggo 5x is equipped with a 1.5T turbocharged engine paired with either an Aisin 6MT or a Getrag DCT transmission; the Tiggo 5, even in its newer version, continues to use a 1.5T turbocharged engine, delivering a maximum output of 152 horsepower and a peak torque of 205 Nm, matched with either a 5-speed manual or CVT transmission.
11
0
Share

What is the manufacturer model number of the Volkswagen Tiguan L?

The manufacturer model number of the Volkswagen Tiguan L is LSVUD60T3K2051354. Meaning of the manufacturer model number: The manufacturer model number is a type of vehicle information. It includes the manufacturer model number, vehicle photos, wheelbase details, exterior dimensions, and other information, providing a comprehensive introduction to the vehicle. Characteristics of the manufacturer model number: The model number of an automobile product is a designated code consisting of pinyin letters and Arabic numerals used to identify a category of vehicles. In 1988, the state issued the national standard GB9417-88 "Rules for the Preparation of Automobile Product Model Numbers." The automobile model number should indicate the manufacturer brand, type, and main characteristic parameters of the vehicle.
3
1
Share

What are the considerations when purchasing car tires?

Considerations when purchasing car tires include: 1. Check the expiration date; inventory should not exceed 3 years; 2. Inspect the tread patterns and color; pressing firmly on a new tire should not leave marks; 3. Examine the joint between the tread and sidewall for smoothness; 4. Avoid mixing tires of different structures and sizes. The functions of car tires are: 1. To work with the suspension to mitigate shocks encountered while driving; 2. To ensure good ride comfort and smooth driving; 3. To guarantee excellent adhesion between the wheels and the road surface; 4. To improve traction, braking, and off-road capability; 5. To bear the weight of the car.
20
1
Share

What is the range of the Dayang V-Sharp 150?

Mainly involves changing the engine oil and oil filter, along with a full vehicle inspection. Replacement items: Primarily the replacement of engine oil and oil filter. Inspection items: Check doors and engine hood, verify proper functioning of lights, inspect tire pressure, test the tire pressure monitoring system for abnormalities, ensure smooth operation of accelerator and brake pedals, examine parking brake operation, inspect all components of the seat belt system, check for any changes in steering condition, inspect windshield defroster, windshield wipers and washers, check levels of brake fluid, coolant, wiper fluid, and engine oil to ensure they meet requirements, inspect the battery, and examine the engine drive belt for wear. Cleaning items: Clean the air filter element and clean the tires.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.