···
Log in / Register

Where is the cabin air filter located on the Changan Alsvin?

6Answers
ORemington
08/28/2025, 12:45:27 AM

The cabin air filter of the Changan Alsvin is located inside the glove compartment on the passenger side. After opening the passenger door, you can find a black box inside the glove compartment. Opening this box will reveal the cabin air filter, which requires regular cleaning. The Changan Alsvin has body dimensions of 4390mm in length, 1725mm in width, and 1490mm in height, with a wheelbase of 2535mm. In terms of power, the Changan Alsvin is equipped with a 1.4L naturally aspirated engine, paired with a 5-speed manual transmission, delivering a maximum power of 74kW and a maximum torque of 135Nm.

Was this review help?
103
Share
MacChloe
09/09/2025, 11:14:01 PM

I remember changing the air conditioning filter several times when driving the Changan Yuexiang. The filter is located behind the glove box, and the specific operation is as follows: Open the glove box, take a look inside, and you'll see a plastic cover or clip. Push it inward firmly to remove it, and inside lies the filter housing. The first time I changed it, I was worried about breaking something, but after doing it a few times, it became much easier. The filter plays a significant role in trapping dust and pollen, making the air inside the car much fresher while driving, which is good for health. If it hasn't been changed for too long and gets clogged, the airflow from the AC weakens, and there's an unpleasant odor inside the car—it feels really awful. I recommend checking it every six months or 10,000 kilometers. Buying the right filter model and doing it yourself saves money and hassle, and there are plenty of video tutorials online for reference. The location is generally the same, though details might vary slightly across different model years of the Yuexiang. Just shine a light inside the glove box and don't panic.

Was this review help?
5
Share
Expand All
ArthurRose
10/24/2025, 12:04:39 AM

As a car enthusiast, I've studied the air conditioning system of the Changan Alsvin. The air filter location is quite scientifically designed, tucked behind the glove box mainly to prevent external debris from directly entering the AC ducts. To replace it, you need to open the glove box, locate the internal fixing clips or brackets, and gently push to remove the filter housing. The advantage of this layout is easy maintenance without disturbing the car body; regularly replacing the filter can improve AC efficiency by filtering allergens like pollen or bacteria, especially important in cities with heavy air pollution – don't delay too long. I make it a habit to check every season and replace if dust accumulation is found, otherwise the AC workload increases, leading to higher fuel consumption. Compared to other compact cars, the Alsvin is much more user-friendly in this aspect – I've never had issues doing it myself, just remember to wear gloves for dust protection.

Was this review help?
2
Share
Expand All
McAmy
12/06/2025, 11:28:21 PM

As a new car owner, I just learned how to handle the cabin air filter. On the Changan Yuexiang, its location is straightforward—right behind the glove box. The steps are simple: open the glove box, gently press the small clips inside, and the filter housing slides out. You can check the manual to confirm the model number. Replacing the filter reduces dust inside the car, especially important for keeping the air fresh when you have kids. If you're unsure or find it complicated, don’t force it to avoid damaging the interior—just ask the 4S shop. I blow out the dust monthly and replace it yearly, ensuring a more comfortable and worry-free drive.

Was this review help?
8
Share
Expand All
DanteMarie
01/27/2026, 12:42:00 AM

As a middle-aged car owner with limited time, I find replacing the air conditioning filter in my Changan Yuexiang quite effortless, as it's located behind the glove box. The quick method is: open the glove box, remove the inner partition or card slot, and the filter housing will be revealed. Just purchase a compatible replacement, and it's done in two minutes. Why change it regularly? It filters cabin impurities, prevents bacterial growth, enhances cooling efficiency, and saves fuel. I use high-quality filters and inspect them every season—saving money and hassle. Always perform the replacement in a clean area to prevent particles from falling in and affecting the system. The location remains unchanged, and simple maintenance extends the AC's lifespan.

Was this review help?
3
Share
Expand All
DelEthan
04/22/2026, 10:52:52 PM

I'm retired now, but I used to work on cars when I was younger. The design of the air conditioning filter location in the Changan Yuexiang is much better than in older car models—it's right behind the glove box. Just open the glove box, pull out the support bracket, and the filter box is immediately exposed. I remember teaching my grandson how to replace it the first time—it's a simple operation. The filter plays a big role in protecting the family's health by filtering out pollutants. In the past, without this feature, people were more prone to respiratory issues. Nowadays, technology has made things much more convenient. I recommend not skimping on replacements; maintaining it every six months can extend the air conditioner's lifespan and make driving more comfortable.

Was this review help?
11
Share
Expand All
More Q&A

What Causes the Engine Warning Light to Illuminate in a Jaguar XEL?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or signal interruption occurs, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Spark plug failure, ignition coil malfunction, fuel pump issues, or fuel line blockages can all result in poor combustion. Turbocharging problems: Issues with the intake boost piping or turbocharger can also trigger the engine light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: Air intake issues may lead to engine pipe blockages, potentially causing the warning light to activate. A dirty or uncleaned air filter can restrict proper airflow. Exhaust system faults: Exhaust problems can trigger the engine light. Common causes include rear oxygen sensor failure, catalytic converter issues, or exhaust camshaft and bearing failures. Using leaded gasoline, improper lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may damage this component. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or doesn't properly communicate with the engine control unit, it may prevent normal engine operation while illuminating the warning light. When the engine warning light appears, follow these steps: First check if the engine operates normally - observe for vibrations, black smoke, etc. If present, avoid restarting the engine. Note: Never restart if the light is red. If the engine starts normally, turn off the vehicle for 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the ON position (without engaging the clutch). The system will perform a self-check - observe if the warning light turns off after 5-10 seconds. If the light remains on, visit a service center immediately. Technicians can use diagnostic tools to retrieve trouble codes and perform targeted repairs.
116
Share

Is There Any Impact from Switching from 95 Octane to 92 Octane Fuel Long-Term?

Switching from 95 octane to 92 octane fuel long-term does have an impact. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after consumption, but long-term use of the wrong gasoline grade can lead to the following effects: For vehicles designed for lower octane fuel, using higher octane fuel will not cause damage, but the increase in octane rating alters the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical experience being poorer performance. For vehicles designed for higher octane fuel, using lower octane fuel can cause engine knocking. Because the octane rating is significantly lower, the reduced ignition point causes premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is imperceptible, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. In addition to checking the appropriate gasoline grade in the vehicle's manual, you can also find it on the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane fuel, while those with a compression ratio between 10.0-11.5 should use 95 octane fuel. However, with the use of new technologies, the compression ratio alone cannot determine the required gasoline grade. High compression ratio engines can be tuned to use lower octane fuel because other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane.
108
Share

What are the hidden functions of the 2011 Teana key?

The hidden functions of the 2011 Teana key include closing the windows after turning off the engine, finding the car in a parking lot, automatically opening the trunk, and remotely opening the windows. Relevant information about the Teana is as follows: 1. Exterior Design: The 2021 Teana newly introduced red-black and white-black dual-color exteriors. Except for the entry-level 2.0L model, all models are equipped with 17-inch or larger wheels, LED headlights, and LED daytime running lights. Additionally, the model also launched the Phantom Edition package, which includes blackened rear emblems, chrome front grille trim, wheels, rear spoiler, Midnight personalized rear emblem, and other unique exterior accessories. 2. Interior Design: The 2021 Teana upgrade features piano-black door trim panels, wood-grain center console and gear lever box, and exquisite soft material wrapping to enhance the cabin's luxury feel. Moreover, the Phantom Edition package also includes luxury LED welcome pedals and exclusive floor mats. 3. Powertrain: The 2021 Teana offers a 2.0L naturally aspirated engine and a 2.0T turbocharged engine, paired with the new intelligent XTRONIC-CVT continuously variable transmission equivalent to an 8AT gear range. The 2.0T model is equipped with the VC-TURBO variable compression ratio turbocharged engine, which allows the engine compression ratio to intelligently and continuously switch between 8:1 (high performance) and 14:1 (high efficiency). The 2021 Teana can accelerate from 0 to 100 km/h in just 6.42 seconds, with a minimum fuel consumption of 6.6L per 100 km.
119
Share

Should the car be started when charging a phone inside?

Starting the car is necessary when charging a phone inside. Here are the precautions for starting a car: 1. Check the surroundings of the vehicle: Walk around the car to inspect its exterior and the environment, ensuring there are no obstacles in front or behind the car. Check the ground where the car is parked for any suspicious oil stains or water stains, verify if the front and rear light assemblies are damaged, and ensure the tire pressure is adequate. 2. Inspect the internal condition of the car: Check if the engine oil and coolant levels are sufficient, and if the front and rear lights, signal lights, and dashboard are functioning properly. The main focus is to examine the technical condition inside the car. Lift the engine hood, pull out the dipstick to check if the oil level is normal, and unscrew the radiator cap to verify if the water level is normal.
112
Share

What is the method to reset the maintenance light on Changan Suzuki?

Turn on the ignition switch, briefly press the right-side information display selection handle until the information display screen goes black and then stops. Press and hold the left-side mileage button for more than 5 seconds until the oil lock display appears on the screen, then release the button. The display area will show the oil lock. Release the button and press it five times consecutively within 2 seconds, completing the action within 3 seconds. The oil lock will turn off, indicating the operation is complete.
115
Share

Why does the car key not respond when locking the car?

If the car key does not respond when locking the car, it may be due to a malfunction of the remote lock or aging of the remote transmitter antenna in the vehicle, which prevents the remote key from working properly. Another possible cause is strong magnetic signal interference around the car. Here are some precautions for car keys: 1. Do not place it near electronic devices: Since smart keys use low-intensity radio waves, they may not function properly under magnetic interference. Frequently placing the smart car key together with a mobile phone can lead to malfunction, as the chip inside the smart key may sometimes be affected by the phone's frequency, temporarily disabling the remote function. Additionally, if the smart key receives high-intensity radio waves, it may excessively drain the battery. Therefore, avoid placing the smart key near electronic devices such as TVs or personal computers. 2. Avoid rough handling: Smart keys are most vulnerable to being dropped from a height. While the outer shell of most smart keys is sturdy, the internal circuitry is less resistant to impact and can easily be damaged by severe collisions. Furthermore, if water enters the smart car key, it can burn out the internal circuitry, also causing remote failure. If the smart car key gets wet, do not shake it vigorously, as this can cause water to spread to other critical circuits. Also, avoid using the remote to unlock the car immediately, as this may damage the circuit board. 3. Use the correct battery: The battery life of a smart car key is approximately one year. Battery consumption varies depending on the frequency and distance of key usage. Replacing the battery of a smart car key requires caution, as any mistake can damage the circuit board inside the key. Before replacement, the owner should carefully review the battery replacement diagram. When disassembling the key, pay attention to the original positions of all components and try to use an original battery. During installation, ensure the correct orientation of the battery's positive and negative terminals to avoid incorrect placement. Additionally, be careful with the sealing ring at the bottom of the key to prevent damage during replacement, which could otherwise burn out the circuit board.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.