Where is the cabin air filter located on the Buick Excelle?

What is the introduction to gears one to five?

The shifting speeds for gears one to five are as follows: 1. 1st gear: Used for normal starting or climbing very steep slopes. The speed is generally around 10 km/h when using this gear. 2. 2nd gear: Used as a transitional gear for acceleration after starting, or for low-speed driving or climbing steep slopes. The speed is generally around 20 km/h. 3. 3rd gear: Used at speeds between 20-40 km/h, commonly used for city driving. 4. 4th gear: Used at speeds between 40-60 km/h. 5. 5th gear: Used at speeds of 60 km/h or above. Additional information: Generally, to engage 1st gear, move the gear lever to the left and then push forward; for 2nd gear, move left and then push down; for 3rd gear, return to neutral and then push straight up; for 4th gear, return to neutral and then push straight down; for 5th gear, push straight to the right and then up (specific operations should refer to your vehicle's gear markings).

14

1

Share

What is the minimum ground clearance of the Hyundai Fista?

The minimum ground clearance of the Hyundai Fista is 160mm. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the car's ability to pass obstacles such as stones and tree stumps without collision. In terms of interior, the Fista is based on Hyundai's design style, with clear functional divisions. It is equipped with a floating central control screen, a three-spoke sports steering wheel, and lines carved in the direction of showing a sense of strength, with a significant sports style. The body dimensions of the Hyundai Fista are 4660mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm. The Hyundai Fista is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The body structure is of a load-bearing type.

1

Share

Are Vehicle Inspection Stations Open on Saturdays?

Most vehicle inspection stations are closed on Saturdays and Sundays. The vehicle inspection process is as follows: 1. Vehicle Inspection: Bring your driver's license, ID card, vehicle registration certificate, and the current valid compulsory traffic insurance policy. Drive the vehicle to the vehicle management office or an authorized vehicle inspection station for inspection. 2. Form Filling: Fill out the annual vehicle inspection application form at the vehicle management office. Then submit the form along with other required documents to the staff and pay the inspection fee. 3. Obtain Inspection Pass Certificate: After payment, proceed to the exterior inspection area where staff will check the vehicle's appearance. Ensure you have a fire extinguisher and warning triangle ready. Once the exterior inspection is complete, the vehicle will immediately undergo the line inspection. After the line inspection, return to the main hall and collect the inspection pass certificate from the designated window. 4. Receive Annual Inspection Stickers: Take the pass certificate to the designated window to collect the annual inspection sticker and environmental inspection pass sticker, completing the inspection process. When collecting these stickers, you'll need to submit a copy of the vehicle registration certificate for each, which can be prepared in advance.

7

0

Share

What does 04 acceleration race mean?

04 refers to the 0~400 meter car acceleration race (also known as the 1/4 mile acceleration race), where the car that completes the 400-meter distance in the shortest time wins. In addition to 04, there are related events such as 02 and 08. This type of competition originated from the NHRA events in the United States, with the first such event held in the U.S. dating back to 1951, after which it became popular nationwide. The rules of the 04 acceleration race: 1. Race time: Two cars compete simultaneously, and the winner is not determined by who finishes first, but by the time each car takes to complete the 400 meters (calculated separately). 2. Classification: Due to significant inherent differences in car engine models, the 04 acceleration race groups cars based on engine displacement and cylinder count, including categories like four-cylinder four-wheel drive, four-cylinder front-wheel drive, six-cylinder front-wheel drive, turbocharged, etc., with very detailed classifications.

15

3

Share

How to Turn Off a Car Dash Cam?

Simply press the power button of the dash cam to turn it off. When the dash cam in the car is not needed, it can be turned off. Generally, the switch of the dash cam is located directly on the device, and pressing it once will turn it off. Below is some related information about dash cams: 1. Definition of Dash Cam: A dash cam is an instrument that records images, sounds, and other related information during vehicle travel. The function of a car dash cam is similar to the "black box" used in aircraft. Its working principle involves digitally recording and cyclically updating the road conditions in front of, inside, and around the vehicle. The recorded data includes in-car audio, the car's acceleration, steering, and braking, among others, to be used for investigating traffic accident liability. 2. Classification: Dash cams are mainly divided into two types: rearview mirror dash cams and data dash cams. Rearview mirror dash cams and data dash cams are characterized by good concealment and ease of use. All-in-one dash cams are highly integrated, feature-rich, and maximize their advantages within the limited space of a car.

18

1

Share

What Causes a Thud Sound from the Chassis When Starting the Car?

Car starting with a thud sound from the chassis is due to the aging of certain components in the car's chassis. After a period of use, the suspension system ages rapidly. Some supporting parts gradually lose their original function, causing the chassis to make a creaking sound when starting the car. Below is an introduction to car maintenance: 1. Exterior Inspection: Before driving, check the doors, hood, trunk, and glass condition. Inspect for body damage, tilting, oil or water leaks, etc. 2. Engine and Various Fluids: Check the fastening of engine components and inspect for oil or water leaks at engine joints. Adjust belt tension and inspect the fastening of pipelines and wiring. Top up engine oil, coolant, and battery electrolyte as needed. 3. Tires: Check tire wear and clean the trunk. Replace tires when they approach the wear indicators. Inspect for bulges, abnormal wear, aging cracks, or hard damage. 4. Cleaning and Lubrication: Clean oil stains from the engine compartment cover, door, and trunk hinge mechanisms, and lubricate them. Antifreeze typically has a service life of 2 years and should be replaced during maintenance, along with a thorough cleaning of the cooling system. Due to the hygroscopic nature of the brake system, brake fluid should be replaced every two years.

11

0

Share

Where is the cabin air filter located on the Buick Excelle?

What is the introduction to gears one to five?

What is the minimum ground clearance of the Hyundai Fista?

Are Vehicle Inspection Stations Open on Saturdays?

What does 04 acceleration race mean?

How to Turn Off a Car Dash Cam?

What Causes a Thud Sound from the Chassis When Starting the Car?

What year was F produced?

Why are there few people buying the Encore?

Does Driving Through Water Have a Significant Impact on a Car?

Why does the car air conditioning not cool when the vehicle is not moving?