···
Log in / Register

Where is the cabin air filter located in the Zotye T300?

3 Answers
AllieLynn
07/29/25 12:55am
The cabin air filter of the Zotye T300 is located behind the glove box on the passenger side. To replace the cabin air filter, you need to remove the glove box on the passenger side. After removal, you will see the end of the cabin air filter, which can be pulled out. Finally, insert the new cabin air filter in the same direction as the removed one and reassemble the glove box. The Zotye T300 is a compact SUV with dimensions of 4405mm in length, 1830mm in width, and 1640mm in height, and a wheelbase of 2610mm. The vehicle is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine.
Was this review help?
9
3
Share
LucilleAnn
08/12/25 10:33am
As a T300 owner, I've replaced the cabin air filter myself before. It's hidden behind the glove compartment on the passenger side. Just open the glove box, remove all items inside, then push upwards or squeeze from both sides to detach it. You'll see a rectangular cover - open it to pull out the old filter. The location is quite convenient as it requires no screwdrivers or special tools. By the way, the cabin air filter should be replaced every 10,000 km or so to prevent excessive dust and pollen buildup that could affect air quality and cause allergies or coughing. Especially for frequent city driving with heavy air pollution, regular replacement can save dealership costs - aftermarket filters only cost a few dozen yuan. Don't just focus on engine maintenance during regular servicing, these small components are equally crucial.
Was this review help?
14
0
Share
Expand All
TessaRose
10/01/25 8:16am
Buddy, I've changed the AC filter several times. In the Zotye T300, the filter is behind the panel on the passenger side. To be specific, turn off the AC, open the glove box, and give the panel a firm pull—it's usually stuck on the tracks. Once removed, you'll feel the filter housing. Before installing the new one, remember to clean out any debris, as it's hard to remove if it falls inside. Regular checks are recommended, especially in humid southern regions where filters can easily grow mold, causing unpleasant odors in the airflow. If you're doing it yourself, buy the right model and don't skimp—cheap ones can warp and leak air. Over time, a clogged filter reduces cooling efficiency and increases fuel consumption, so address it early.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Is the reversing radar ultrasonic or electromagnetic wave?

Reversing radar uses ultrasonic waves because they have better directivity. Ultrasonic waves are sound waves with a frequency higher than 20,000 Hz. They have good directionality, strong penetration ability, and are easy to obtain concentrated sound energy, making them suitable for distance measurement, speed measurement, cleaning, welding, crushing stones, sterilization, and disinfection. In contrast, electromagnetic waves are commonly used for data transmission. By utilizing ultrasonic waves for echolocation, the distance between the car and obstacles can be detected, providing the driver with corresponding information. During reversing, warning sounds indicating distance will be emitted, allowing the driver to perform rational operations based on the warnings to achieve smooth parking. The reversing radar mainly consists of three parts: ultrasonic sensors, a controller, and a buzzer. When it operates, the ultrasonic sensors emit ultrasonic waves outward. When these waves hit an obstacle, they bounce back and are received again by the ultrasonic sensors. The controller then calculates the distance between the car and the obstacle based on the time taken for the ultrasonic waves to be emitted and reflected back. Finally, the buzzer emits warning sounds to alert the driver.
17
5
Share

Can I park in the marked areas on the roadside?

In areas with circular prohibition signs featuring a blue background, a red circle, and a diagonal line inside the red circle, temporary parking is allowed. If there is a red cross inside, it indicates no parking or temporary parking. Yellow dashed lines on both sides of the road indicate that temporary parking is permitted. If the road has solid yellow lines, parking is prohibited. Additional information: 1. Areas where parking is not allowed include: sections of the roadside marked with solid lines; areas with no-parking signs; all sections of highways; intercity expressways; strictly controlled urban roads; within 50-100 meters before and after intersections; major urban thoroughfares. 2. Areas where parking is allowed include: temporary parking spots (marked with signs); paid parking spots; marked parking spaces on the roadside (white lines); sections of the road without solid lines on the inner side where temporary stopping is permitted.
16
4
Share

What are the differences between the 2014 and 2015 Skoda Octavia models?

The two models differ in body dimensions, engine, and suspension. Different body dimensions: Classic Octavia body dimensions: Length/Width/Height (mm) 4569/1769/1462 (mm), wheelbase 2578mm; New Octavia body dimensions: Length/Width/Height (mm) 4659/1814/1460 (mm), wheelbase 2686mm. Different engines: The Classic Octavia uses a cast iron 1.6L naturally aspirated engine with maximum power of 77KW, maximum horsepower of 105hp, and maximum torque of 155N.m; The New Octavia uses an aluminum alloy 1.6L naturally aspirated engine with maximum power of 81KW, maximum horsepower of 110hp, and maximum torque of 155N.m. Different suspensions: The Classic Octavia uses front MacPherson independent suspension and rear four-link independent suspension; The New Octavia uses front MacPherson independent suspension and rear torsion beam non-independent suspension.
2
4
Share

What Does Vehicle Replacement Subsidy Mean?

Vehicle replacement subsidy refers to a cash subsidy offered for vehicles older than 5 years. Preliminary discussions have categorized the subsidy into three tiers based on the vehicle's age: vehicles used for 5 to 6 years receive ¥5,000, those used for 6 to 8 years receive ¥6,000, and vehicles older than 8 years receive the highest subsidy of ¥7,000. Required Documents for Subsidy: Owner's ID card (original and copy) or organization certificate (original and copy); Driving license (copy) or vehicle registration certificate (copy) of the scrapped old vehicle; For new vehicle purchases, provide the new vehicle invoice and registration certificate; If processed by an agent, provide a power of attorney from the owner or legal entity and the agent's ID card (original and copy). Replacement subsidies are typically available only at 4S stores. When a customer sells their old car to a 4S store, the store provides compensation. The 4S store then sends the collected used cars to dealers, after which these vehicles enter the used car markets in different regions, improving the recycling rate of used cars.
1
3
Share

Why does the Passat Lingyu not respond when starting despite having battery power?

If the Passat Lingyu does not respond when starting, check the starter's fuse and relay. It could also be caused by poor contact in the starter's solenoid coil. Precautions for car batteries: Avoid parking the car in open parking lots for extended periods. The car engine is harder to start in winter. Each attempt to start the car should not exceed 5 seconds, and the interval between attempts should be no less than 15 seconds. Car batteries need to be charged regularly. If left unused for a long time, the battery will slowly discharge on its own. Clean the battery terminals periodically. Avoid using car electronics after the engine is turned off. Running the battery alone without the engine generating power can damage it. Function of relays: Car relays primarily function to control high current with low current. The car control module cannot directly power the actuators, as this could easily burn out the computer board. Therefore, the car control module powers the relay coil to control the actuators.
16
5
Share

Is a manual-automatic transmission CVT or AT?

Both CVT and AT can achieve manual-automatic transmission. The following are the advantages and disadvantages of manual-automatic transmissions: 1. Advantages: (1) The technologically mature AT transmission is the most widely used and popular transmission on the market today. (2) Good reliability. Traditional hydraulic automatic transmissions use a torque converter (or hydraulic coupling, multi-plate clutch, etc.), which can cushion the engine's power impact and is paired with a planetary gear mechanical combination, ensuring stable performance. It can also withstand high torque. 2. Disadvantages: (1) Low transmission efficiency and high fuel consumption. Since the engine power needs to pass through a torque converter (or multi-plate clutch, etc.) to reach the gear set, some of the engine power is wasted. Therefore, compared to manual transmissions (including CVT transmissions), AT transmissions consume more fuel. (2) Average comfort. Since AT transmissions still use fixed gear sets, gear shifts can cause jerks and noise. Although technological advancements have greatly optimized shift impacts, theoretically, AT transmissions are still not as smooth as CVT transmissions. (3) Complex structure and slightly higher manufacturing costs. AT transmissions require more mechanical parts, making the overall weight greater than other types of transmissions and the manufacturing costs higher. However, due to the over-maturity of AT transmission technology and massive production, it creates the illusion of being 'cheap.'
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.