Where is the cabin air filter located in the Zotye Damai X7?

1 Answers
AlessandraAnn
07/30/25 2:05am
The cabin air filter in the Zotye Damai X7 is located inside the glove compartment in front of the front passenger seat. Remove the glove compartment to see a rectangular box, then open the box to access the cabin air filter. The function of the cabin air filter is to provide fresh air, ensure clean air in the passenger compartment without bacterial growth, create a healthy environment, and effectively filter out dust, pollen, and abrasive particles in the air. The Zotye Damai X7 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.8L turbocharged engine with a maximum horsepower of 177 PS, maximum power of 130 kW, and maximum torque of 245 Nm, paired with a 6-speed dual-clutch transmission.
Was this review help?
7
2
Share
More Forum Discussions

Which car has a logo of a fork?

A car with a fork logo is Maserati. Maserati is a renowned Italian racing and sports car manufacturer, founded in Bologna in 1914, with its headquarters now located in Modena. Their emblem is a trident. Here is more information about Maserati: 1. Maserati's design embodies: The new coupe series represents the pinnacle of Italian coupe manufacturing technology and the perfect fusion of Italian design aesthetics and high-quality craftsmanship. 2. Introduction to the Maserati Quattroporte: Taking the Maserati Quattroporte as an example, its body dimensions are 5262mm in length, 1948mm in width, and 1481mm in height, with a wheelbase of 3171mm. The front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. It integrates the application of high-performance sports car technology, combining traditional styles with contemporary trends.
4
1
Share

What is the fuel consumption of the Toyota IZOA?

Toyota IZOA's fuel consumption is as follows: urban driving condition consumption is 6.8L/100km, suburban driving condition consumption is 5L/100km, and combined driving condition consumption is 5.7L/100km. Here are some introductions about Toyota IZOA: 1. Power: Equipped with a 2.0L engine, with a maximum power of 171 horsepower and a peak torque of 203 Nm. 2. Exterior: The exterior is very cool and very popular among young people. The interior workmanship and configuration are very exquisite, the overall performance is very good, and the cost performance is very high. It is a very worthwhile small SUV with low fuel consumption.
5
4
Share

Can I still get a motorcycle license with a C1 driver's license?

You can obtain a motorcycle license with a C1 driver's license, but you must wait until the one-year probationary period is over and you have not accumulated more than 12 penalty points during that year. Permitted Vehicle Types: The C1 driver's license allows driving small and mini passenger vehicles, light and mini cargo vehicles, and light, small, and mini specialized operation vehicles. Small passenger vehicles must have a seating capacity of 9 or fewer people. The C1 driver's license does not permit driving: large buses, tractors, city buses, medium-sized buses, large trucks, regular three-wheeled motorcycles, regular two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, or trams. Additionally, the C1 license does not allow driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. Physical Examination Requirements: Motor vehicle drivers aged 70 or older (including 70) must undergo an annual physical examination, while those under 70 do not need to.
13
1
Share

Which brand is the engine of Haval H9?

The engine of Haval H9 is independently developed by Great Wall and is a domestic engine. The engine model of Haval H9 is GW4C20B, with a maximum horsepower of 224, a maximum power of 165KW, a maximum power speed of 5500rpm, and a maximum torque of 385N.m. For daily maintenance of the Haval H9 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, the oil should be changed regularly according to usage conditions, and the oil level should be moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to pass through the bypass valve and bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston rings and cylinder wall, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.
7
1
Share

Can You Release the Clutch While Pressing the Accelerator?

You can release the clutch while pressing the accelerator when driving, but it's important to follow the correct steps. When the clutch is fully depressed, do not press the accelerator. First, shift gears. When the clutch is lifted to the semi-engagement point and held steady, you can gradually lift the clutch with your left foot while simultaneously pressing the accelerator with your right foot until the clutch is fully released. Then, move your left foot away from the clutch. Additional Information: 1. Clutch Definition: The clutch refers to the separation device between the car engine and the transmission, also known as the clutch. In automatic transmission vehicles, the clutch is integrated into the transmission to enable automatic shifting. 2. Clutch Function: The driving and driven parts of the clutch transmit torque through friction between contact surfaces, using either liquid as a transmission medium (hydraulic coupling) or magnetic force (electromagnetic clutch). This allows temporary separation and gradual engagement, permitting relative rotation between the two parts during transmission. 3. Clutch Working Principle: The torque generated by the engine is transmitted to the driven plate through friction between the flywheel, pressure plate, and the driven plate's contact surfaces. When the driver presses the clutch pedal, the mechanism causes the diaphragm spring's large end to move the pressure plate backward.
17
5
Share

What to Do If You Are Nearsighted When Taking the Driving Test?

Nearsighted individuals can wear glasses. During the physical examination, you only need to use glasses that suit you. The same applies during the test. Below is relevant information: 1. Height: To apply for large passenger vehicles, tractors, city buses, large trucks, or trolleybuses, the height must be at least 155 cm. For medium-sized passenger vehicles, the height must be at least 150 cm. 2. Vision: For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, the naked or corrected vision of both eyes must reach at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, the naked or corrected vision of both eyes must reach at least 4.9 on the logarithmic visual acuity chart. 3. Color Vision: No red-green color blindness. 4. Hearing: Both ears must be able to distinguish the direction of sound at 50 cm from a tuning fork. Those with hearing impairments who can meet the above conditions with hearing aids can apply for a driver's license for small cars or small automatic transmission vehicles. 5. Upper Limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement. However, those with missing fingertip segments or a missing right thumb can apply for a license for small cars, small automatic transmission vehicles, low-speed trucks, or three-wheeled vehicles. 6. Lower Limbs: Both lower limbs must be intact with normal movement, and the length difference must not exceed 5 cm. Those missing a left lower limb or with impaired movement can apply for a license for small automatic transmission vehicles. Those missing a right lower limb or both lower limbs but can sit independently can apply for a license for small automatic transmission vehicles designed for disabled individuals.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.