Where is the cabin air filter located in the Volvo S80L?

2 Answers
Cardoso
07/24/25 12:33am
The cabin air filter in the Volvo S80L is located under the center console on the passenger side, to the left below the glove compartment, adjacent to the central computer board. To access it, remove the right-hand storage compartment in the cabin. You will see a white power distribution panel (computer board). Turn off the ignition switch, unplug all connectors, remove the power distribution panel, and disconnect the black connector on the left. You will then see a heating box with an approximately 15 cm long strip. Remove this strip to reveal the cabin air filter. Here are the functions of the cabin air filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other pollutants from the air.
Was this review help?
9
1
Share
ValeriaDella
08/10/25 8:18pm
I found that the cabin air filter of the Volvo S80L is located behind the glove compartment on the passenger side, and you need to remove the glove box to access it. I change it frequently myself because air quality is especially important when driving for long periods with children in the car. The filter's role is to trap dust and pollen. If not replaced regularly, the AC vents may emit odd odors, which can also affect health. Replacing it isn't difficult—usually, it should be checked every 10,000 to 20,000 kilometers or about once a year. I remember the steps are simple: first, open the glove box, locate and release the clips, and the space inside is the filter housing. Doing it myself saves some money and avoids unnecessary trips to the shop. Also, when choosing a filter, just look for OEM or compatible models—don’t go for the cheapest options. Keeping the filter clean makes driving much more comfortable with smooth airflow.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

How to reset the maintenance light on Haval H2s?

Haval H2s maintenance light reset method: First, start the engine, press the set button on the right side of the multifunction steering wheel, then press the down button on the left side of the multifunction steering wheel twice, and finally press the ok button to complete the maintenance light reset. The Haval H2s is a new compact SUV from the Haval brand, with dimensions of 4195mm in length, 1772mm in width, and 1617mm in height, and a wheelbase of 2550mm. In terms of appearance, the 2018 Haval H2s mainly adjusted the front bumper in its design. The blue label version features a larger fog light position design with chrome trim accents, and the hexagonal grille was changed to a five-horizontal-bar design. The red label model has a honeycomb grille, while the blue label model retains the hexagonal design.
3
4
Share

What is the purpose of automotive wiring harnesses?

Automotive wiring harnesses serve as the main network of a vehicle's electrical circuits; without them, automotive circuits would not exist. A wiring harness refers to a component formed by crimping contact terminals made from copper material with wires and cables, then molding an insulating layer or adding an external metal casing, and finally bundling them together to create a connected circuit. The wiring harness industry chain includes wires and cables, connectors, processing equipment, wiring harness manufacturing, and downstream application industries. Wiring harnesses have a wide range of applications, including in automobiles, household appliances, computers and communication devices, various electronic instruments, and more. The body wiring harness connects the entire vehicle body, generally taking on an H-shaped form. The wires within automotive wiring harnesses commonly have nominal cross-sectional areas, each with allowable load current values, and are used to connect electrical equipment of different power ratings.
14
5
Share

Do brake pads with 4mm remaining need to be replaced?

Brake pads with 4mm remaining do not need to be replaced. They can be used until worn down to only 0.3cm, at which point they should be replaced immediately. This is the minimum thickness limit for brake pad replacement. Composition of brake pads: Brake pads are generally composed of steel plates, bonded heat insulation layers, and friction blocks. The steel plates are coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating meets quality standards. Definition of brake pads: Brake pads are also known as brake linings. In a car's braking system, brake pads are the most critical safety components. The effectiveness of all braking performance is decisively influenced by the brake pads. Therefore, high-quality brake pads act as protectors for both people and vehicles.
10
5
Share

Can 17-inch to 18-inch wheel modification be approved for record?

17-inch to 18-inch wheel modification cannot be approved for record. Because modifying non-original size wheels is considered illegal modification, even if you proactively apply for record, it won't be approved. Modifiable parts: Owners can install roof racks, add side steps for jeeps, or install front/rear bumpers for small vehicles, as long as they are not too prominent, do not exceed the original length and width of the vehicle body, and do not affect the safety performance of the vehicle. These modifications are not considered illegal. Illegal modifications: Changing the car logo, adding lighting devices, installing xenon lights, etc., which alter the fundamental characteristics of the original vehicle, are all illegal. For example, changing a domestic car logo to a "Mercedes-Benz" for fun, or adding original Toyota logos that change the vehicle's identifying features, are considered illegal modifications.
17
5
Share

Can I Test Drive a Car on a Rainy Day?

You can test drive a car on a rainy day. As long as the rain isn't heavy enough to affect visibility, it's generally acceptable. Test Drive Requirements: You can go to a 4S store for a test drive. Bring your driver's license and ID card, fill out the required forms as per the 4S store's requirements, and then you can proceed with the test drive. A staff member will drive the car to the designated test drive route before handing it over to the customer for the driving experience. Test Drive Precautions: During the test drive, please follow the route specified by the dealer and ensure there is a professional accompanying driver to guarantee a smooth experience. Test driving carries certain risks, so before starting, make sure to ask whether the car is insured. Only proceed if it is covered by insurance.
7
4
Share

Are There Dash Cams That Don't Need to Be Plugged In?

Currently, there are no dash cams that don't require being plugged in. Overview of Dash Cams: A dash cam is a device that records images, sounds, and other related information while a vehicle is in motion. After installing a dash cam, it can record the entire driving process's video and audio, providing evidence in case of traffic accidents. It continuously records while driving, capturing time, speed, and location in the footage, essentially acting as a 'black box.' Functions of Dash Cams: They protect the legal rights of drivers. In case of accidental collisions with pedestrians crossing the road or cyclists and motorcyclists, drivers might face extortion. Having a dash cam allows drivers to provide valid evidence for themselves.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.