Where is the cabin air filter located in the Volkswagen Touareg?

2 Answers
Elliana
07/24/25 10:10pm
The cabin air filter in the Touareg is located behind the glove compartment. To replace the Touareg's cabin air filter, follow these steps: 1. Remove the glove compartment and detach the lower panel beneath it. Gently pull the panel, as there is a connection wire for the footwell light behind it. Remember to disconnect the footwell light wire when removing the panel. 2. Remove the cover of the air filter by pressing the clips on both sides to release it. 3. After removing the air filter cover, take out the old air filter and replace it with a new one. 4. Reinstall the cover and panel, paying special attention to reconnecting the footwell light wire.
Was this review help?
9
0
Share
LaAnna
08/10/25 2:55pm
I've been driving a Volkswagen Touareg for a while now, and the cabin air filter is located behind the glove compartment in front of the passenger seat. Specifically, you need to open that glove box first, empty all the items inside, and you'll see a latch or small cover inside the compartment. Remove it, and you can directly access the filter housing. The design is quite user-friendly, making it easy to DIY replace. For someone like me who often goes on road trips, driving through dusty areas can easily cause unpleasant odors when the AC is on. Replacing the filter promptly helps maintain fresh air and prevents allergies. Generally, it's recommended to check it every year or 15,000 kilometers. A worn-out filter can affect the AC's cooling efficiency and may even breed bacteria. I use compatible filters—affordable and practical. Before starting, remember to check the vehicle manual to confirm the steps and avoid damaging any parts.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How to Adjust the High and Low Beams of a Volkswagen?

Method to adjust the high and low beams of a Volkswagen: There is a round light switch on the left side of the steering wheel. Pushing it downward activates the high beams, while pulling it back turns on the low beams, with the default position being low beams. The high and low beams are commonly referred to as headlights. As the eyes of a car, headlights not only relate to the external image of a car owner but are also closely linked to safe driving at night or under bad weather conditions. High beams: It is generally best not to use high beams when driving in the city because urban areas usually have good lighting conditions. The high angle of high beams can easily dazzle oncoming drivers and pedestrians, affecting their vision, which is unsafe and considered impolite driving behavior. Volkswagen's lineup includes models such as the Sagitar, Lavida, and Magotan. For example, the Lavida (LAVIDA) is the first A-class car independently developed by Shanghai Volkswagen, with body dimensions of 4605mm in length, 1765mm in width, and 1460mm in height.
6
5
Share

What is the fuel consumption of Dewei D30?

The fuel consumption of Dewei D30 is 13 to 16 liters per 100 kilometers. Formula for calculating fuel consumption: Fuel consumed ÷ Distance traveled × 100 = Fuel consumption per 100 kilometers. The data on fuel consumed is relatively difficult to obtain. Generally, a full tank is used as the initial data. After traveling a certain distance, the tank is filled again, and the fuel quantity provided by the gas station is taken as the accurate data. Tips for reducing fuel consumption: The economical speed is the speed at which the car consumes the least fuel when driving in direct gear or overdrive. When a car travels on the same road, different speeds result in different fuel consumption. Therefore, there is only one speed at which the fuel consumption is the lowest. Thus, the car should be driven at medium speed in direct gear or high gear to save fuel.
8
1
Share

Is the Combination Switch Faulty if Both Headlights and Taillights Are Not Working?

If both the headlights and taillights are not working, it is not due to a faulty combination switch but rather a typical issue with the lighting harness. Introduction to Combination Switch: The combination switch, also known as a changeover switch, is commonly used in electrical control circuits as a power-introducing switch. It can be used to directly start or stop small-power motors or to control motor forward/reverse rotation and direction changes. It is also frequently used to control local lighting circuits. Combination switches come in single-pole, double-pole, triple-pole, and quadruple-pole configurations, with rated continuous currents ranging from 10A, 25A, 60A, to 100A. Function of the Combination Switch: The combination switch is a multifunctional modular switch used to control lighting and signal devices, as well as some other accessories. It is typically a handle-style switch installed on the steering column below the steering wheel for easy operation by the driver.
12
1
Share

Must a motorcycle be scrapped after 13 years?

Motorcycles must be scrapped after 13 years. Vehicle scrapping process: The owner of a vehicle applying for scrapping and renewal must fill out the "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" in duplicate and affix the owner's seal. Apply at the registration and acceptance counter, where a "Vehicle Scrapping Notice" will be issued for vehicles that have reached the scrapping age limit. For vehicles that have not reached the scrapping age limit, the vehicle inspection counter will assess and issue a "Vehicle Scrapping Notice" if the vehicle meets the scrapping standards. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Assessment Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the case will be submitted for approval according to regulations to complete the scrapping registration.
3
2
Share

How Many Points Are Required for Annual Vehicle Inspection?

Annual vehicle inspection requires 12 points on the driver's license. Types of Driver's Licenses and Permitted Vehicle Categories: C1 license permits driving small and micro passenger vehicles, light and micro cargo vehicles, and light, small, and micro special-purpose vehicles. C2 license permits driving small automatic transmission vehicles, including small and micro automatic transmission passenger vehicles and light and micro automatic transmission cargo vehicles. C3 license permits driving low-speed cargo vehicles (formerly four-wheel agricultural transport vehicles). C4 license permits driving three-wheeled vehicles (formerly three-wheel agricultural transport vehicles). B2 license permits driving large trucks, heavy and medium cargo vehicles, and large, heavy, and medium special-purpose vehicles. Validity Period of Driver's License: The driver's license is valid for six years. After the six-year validity period expires, it will be replaced with a ten-year validity license. Eligible drivers may receive a long-term valid license. The driver must apply for a license renewal at the vehicle management office where the license was issued or another office 90 days before the expiration date.
9
0
Share

Why Should a New Car's Engine Be Washed?

Washing a new car's engine is aimed at protecting the engine's safety. Regular engine cleaning not only prevents the blockage of lubrication channels but also helps to some extent in removing carbon deposits from piston rings and ring grooves, thereby maintaining the engine and extending its service life. Engine cleaning method: Prepare a paintbrush, spray bottle, engine compartment surface cleaner, two cloths, and a high-pressure air can. First, remove surface dust with the high-pressure air can, then spray the engine compartment surface cleaner, being careful not to spray it inside the battery or fuse box. Wait for about ten minutes before wiping it dry. For wiring connectors, avoid using the engine compartment surface cleaner; instead, clean them with a damp cloth. For stubborn oil stains and crevices, use the spray bottle and paintbrush for careful cleaning, ensuring to control the water amount, spray method, and avoid sensitive areas. Finally, dry any remaining water in the engine compartment with a cloth or by idling the engine to evaporate the moisture. Benefits of engine cleaning: The engine's interior is lined with oil channels, which over time can accumulate sludge and other contaminants. Engine cleaning helps to remove these sludge impurities from the oil channels, ensuring the proper functioning of the engine's lubrication system. By cleaning away sludge and carbon deposits that affect the engine's normal operation, the engine's performance can be improved, and its lifespan extended.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.