Where is the cabin air filter located in the Volkswagen Magotan?

2 Answers
LeonardoMarie
07/24/25 2:01am
The cabin air filter in the Volkswagen Magotan is located beneath the glove compartment on the passenger side. By removing the protective panel under the glove compartment, you can access it. The function of the cabin air filter is to ensure a tight seal against the housing, preventing unfiltered air from entering the cabin. It also absorbs moisture, soot, ozone, odors, carbon oxides, SO2, and CO2 from the air. The Volkswagen Magotan is a mid-size sedan under the FAW-Volkswagen brand, with a body length of 4865mm, width of 1832mm, height of 1471mm, and a wheelbase of 2871mm. In terms of exterior design, the Magotan features the brand's latest family design language, with a redesigned front grille that incorporates chrome accents and obsidian elements, giving the front end a refined and sophisticated appearance.
Was this review help?
4
0
Share
HenryLee
08/10/25 9:42pm
As a long-time owner of the Volkswagen Magotan, I find it very convenient to replace the air conditioning filter myself every time—it's hidden behind the glove compartment on the passenger side. The steps are simple: open the glove box and pull it to the lowest position, where you’ll usually spot two plastic clips or screws; once released, the glove box can be fully removed, revealing a small rectangular cover. Unclip the fastener or press the latch to remove the old filter—wow, it’s always shocking to see how dusty it is when pulled out. When installing the new filter, make sure the arrow points in the direction of airflow to avoid reversing it. The whole job takes just 5 minutes, and buying a high-quality filter online costs less than 50 yuan, saving a lot compared to dealership service. Replacing it annually or every 15,000 km ensures stronger airflow, no odors, and much fresher cabin air while driving. Especially in heavily polluted cities, replacing it helps filter PM2.5, making family rides much more comfortable.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

Can Two-Stroke and Four-Stroke Engine Oils Be Used Interchangeably?

Two-stroke and four-stroke engine oils cannot be used interchangeably. Due to differences in structure and lubrication characteristics between two-stroke and four-stroke engines, their lubrication performance requirements and oil compositions are fundamentally different, making them incompatible for cross-use. Two-stroke oil enters the combustion chamber with the fuel-air mixture, ignites, and must provide lubrication at high temperatures without causing carbon deposits. Four-stroke oil only lubricates within the crankcase, cannot withstand high temperatures, and cannot be substituted by other oils; otherwise, it may lead to carbon buildup, cylinder seizure, and engine failure. Mixing these oils can cause the following issues: Misfiring: Four-stroke engine oil contains antioxidants and anti-corrosion agents like zinc dialkyldithiophosphate (ZDDP), which can cause spark plug fouling and deposit formation, leading to electrode bridging and misfiring. Deposit accumulation: Four-stroke engine oil has high ash content, which can cause premature ignition and excessive combustion deposits. Exhaust blockage: Single-grade four-stroke oil contains high-viscosity base oils prone to smoke and deposits, while multi-grade oil contains oxidation-resistant polymers. Additionally, the high flash point of four-stroke oil (around 210°C) results in incomplete combustion, leading to severe deposit buildup and exhaust blockage. Engine oil degrades over time and requires regular replacement. For two-stroke engines, oil must be periodically replenished as it burns in the combustion chamber. Four-stroke engines require regular oil changes, and the oil filter should be replaced simultaneously each time. The oil filter is essential for removing contaminants from the oil; without it, the oil becomes dirty quickly, impairing engine lubrication. When purchasing oil filters, always opt for genuine products from reputable brands.
2
2
Share

How to Operate the XT5 Remote Start?

The method to use the XT5 remote start is to first press the lock button on the key, then immediately press the button with an arrow to start the car. The car remote start activates the engine remotely via the remote key, also known as engine remote start. Remote start is the process of starting the engine or motor remotely using the remote key. Its principle is quite simple: the vehicle starts the engine or motor based on the signal received from the remote key. The entire process eliminates the inconvenience of manually entering the car to operate, while the central locking system remains locked during the engine or motor operation, providing effective security. Features of Remote Start: High Reliability: Since the remote start of the engine or motor is structurally identical to manual ignition inside the car, there is no mechanical wear issue with the heater, significantly reducing the probability of malfunctions. Convenience: Although the remote start of the engine or motor cannot be timed like parking heating, the remote start method is still very convenient. The remote range is typically no less than 50 meters, allowing the engine or motor to be started in advance from home or the office if the car is parked in a ground parking lot. Whole Vehicle Heating: This function, like parking heating, warms up the coolant in the radiator, effectively heating the cabin, engine, and even the windows. Automatic Timing: Usually, if no operation is performed after a certain period following a remote start, the engine or motor will automatically shut down, preventing potential fuel waste from forgetting to turn it off.
8
4
Share

What is the ground clearance of the Trumpchi Shadow Leopard?

The minimum ground clearance of the Shadow Leopard is approximately 138 millimeters. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the road surface when the car is fully loaded. It indicates the vehicle's ability to overcome obstacles such as rocks. The smaller the ground clearance, the weaker the ability to overcome obstacles. Sedans typically operate on flat urban roads, hence their ground clearance is relatively small. Off-road vehicles have larger minimum ground clearances to navigate over larger obstacles. Impact of minimum ground clearance on driving: A larger minimum ground clearance enhances the vehicle's ability to pass over obstacles or uneven terrain but raises the center of gravity, reducing stability. Conversely, a smaller minimum ground clearance weakens the vehicle's ability to navigate obstacles or rough terrain but lowers the center of gravity, improving stability. The design of minimum ground clearance must consider the vehicle's ability to pass loading and unloading platforms during transport and ensure that the car does not scrape against curbs when parked near sidewalks. If the vehicle is intended for sale in specific countries or regions, local road conditions must also be taken into account. Additionally, the value of minimum ground clearance is subject to certain limitations, as it relates to the vehicle's function and aerodynamics. For example, sports cars typically have smaller ground clearances, while SUVs have larger ones. For sedans, the minimum ground clearance generally ranges between 110 millimeters and 150 millimeters. A larger ground clearance (over 130 millimeters) improves off-road capability but reduces high-speed stability, while a smaller ground clearance (below 110 millimeters) enhances high-speed stability but compromises off-road performance. Modern vehicles equipped with air suspension can automatically adjust ground clearance, effectively balancing both off-road capability and high-speed stability.
4
2
Share

How often should the Reiz transmission fluid be changed?

The Reiz requires transmission fluid replacement every 4 years. Transmission fluid is an oil product that maintains the cleanliness of the gear system, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and reduces oil loss under severe operating conditions. The Reiz has dimensions of 4750mm in length, 1795mm in width, and 1450mm in height, with a wheelbase of 2850mm, front and rear track of 1545mm, and a fuel tank capacity of 70 liters. This vehicle is equipped with a 2.5L naturally aspirated engine, delivering a maximum power of 142 kilowatts at 6200 rpm and a maximum torque at 4400 rpm.
19
4
Share

How long does it take to obtain a motorcycle license endorsement?

You can get your motorcycle license endorsement by the license renewal period. Below are some motorcycle riding precautions: 1. Pre-ride safety inspection for two-wheeled motorcycles: Before riding, conduct necessary safety checks to ensure all components are flexible and functional. Taking a two-wheeled motorcycle as an example, the following safety inspections should be performed before departure: Check if the wheels are loose or misaligned; verify if the tire pressure is appropriate. 2. Safe riding speed for motorcycles: According to Chinese traffic regulations: The maximum speed for two-wheeled motorcycles and reverse three-wheeled motorcycles is 50km/h in urban areas and 60km/h on highways; the maximum speed for motorcycles is 30km/h; on expressways, the maximum speed for motorcycles must not exceed 90km/h, and the minimum speed must not be lower than 50km/h.
12
0
Share

What are the differences between Continental MC5 and TC6?

The differences between Continental MC5 and TC6 are as follows: 1. Different main performance: Continental MC5 focuses on the handling and stability performance of the tire; Continental TC6 focuses on quiet performance and grip, and is a product developed for uneven road conditions. 2. Different patterns: Continental MC5 adopts an asymmetric pattern; Continental TC6 adopts a diamond chamfer pattern. 3. Different advantages: Continental MC5 allows the vehicle to get closer to the ground more effectively during driving, improving the tire's grip, and the rigidity of the inner fine pattern blocks is relatively low, which can effectively reduce the noise generated when the pattern blocks collide with the road; Continental TC6 has excellent handling performance at high speeds, ensuring even force distribution on the tire contact surface during turns, and high-speed stability.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.