Where is the cabin air filter located in the Volkswagen Lamando?

2 Answers
HadleyRose
08/26/25 5:20am
The cabin air filter in the Volkswagen Lamando is located in the storage compartment under the windshield on the front passenger side. The steps to remove the cabin air filter in the Volkswagen Lamando are as follows: 1. First, open the glove box cover. Locate the fixing buckle on the right side of the glove box and pull it outward firmly. 2. Remove the fixing buckle of the glove box cover to detach it. 3. Squeeze both sides of the glove box inward with both hands, and the glove box can then be removed. 4. After removing the glove box, you will see the cabin air filter cover. Press firmly on the fixing buckles on both sides of the cover to remove it. 5. Pull the old cabin air filter outward to remove it.
Was this review help?
7
5
Share
OAmy
09/08/25 7:25am
I remember when I first bought my Volkswagen Lamando, I was eager to locate the cabin air filter. It's positioned behind the glove compartment in front of the passenger seat. To replace it, you'll first need to open and empty the glove box, removing all contents inside. Then, locate the plastic clips on both sides—pressing them will release the entire glove box, allowing it to hang down. This reveals a rectangular cover panel; pry it open with some force to pull out the old filter and slide in the new one. DIY is quite straightforward, with plenty of tutorial videos on YouTube. Don’t skip this—last time I replaced mine, the airflow improved significantly, eliminating that musty odor. Driving to work felt much fresher, and I saved hundreds compared to a dealership visit. It’s recommended to check every six months, especially in humid southern climates—a clogged filter reduces cooling efficiency and increases fuel consumption.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

Does Long-Term Use of Mineral Oil Harm the Car?

Long-term use of mineral oil is not a problem as long as the model specifications and oil grade meet the recommendations in the manual and the oil is changed promptly. Below is an extended introduction: 1. Introduction to Mineral Oil: Mineral oil is the lowest grade of engine oil. For vehicles with lower emission requirements, such as small cars and economy models, choosing mineral oil can achieve the desired lubrication and protection for the engine. 2. The Difference Between Mineral Oil and Synthetic Oil: The biggest difference between mineral oil and synthetic oil lies in the fact that synthetic oil has a wider temperature range, longer service life, and higher cost. Under the same oil film requirements, synthetic oil can achieve the desired effect with a lower viscosity, whereas mineral oil requires a relatively higher viscosity compared to synthetic oil to meet this requirement.
20
4
Share

What brand are the original Mercedes wiper blades?

They are usually Valeo, Bosch, Denso, or Continental. The following is a related introduction about Mercedes: 1. Meaning of the name: "Mercedes" means happiness, implying that the cars produced by Daimler will bring happiness to their owners. Mercedes, a German automotive brand, is considered one of the most successful premium car brands in the world, renowned for its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe models. 2. Noble products: Currently, it mainly produces C-Class (mid-range sedans and coupes), E-Class (high-end sedans and coupes), S-Class (luxury sedans and coupes), and G-Class (SUV off-road vehicles).
7
3
Share

Does the 48V Mild Hybrid System Need Charging?

48V mild hybrid vehicles do not require charging. The hybrid system utilizes part of the engine's power to generate electricity and store it in the battery when the vehicle does not require high power output from the engine. Additionally, the kinetic energy reduced during vehicle deceleration and braking is converted into electrical energy and stored in the battery through a process known as "regenerative braking". Below is relevant information about mild hybrid systems: 1. In traditional internal combustion engine vehicles, idling at traffic lights or in traffic jams leads to energy waste and environmental pollution. The BSG (Belt-driven Starter Generator) system intelligently shuts off the engine under such conditions, achieving both environmental protection and fuel savings. 2. During startup, the BSG motor, powered by the battery pack, can reach 3000r/min in an extremely short time with very high ignition success rates. This allows the system to bypass the traditional engine's process of accelerating from zero to idle speed, thereby achieving fuel efficiency.
3
1
Share

What Causes Weak Acceleration in Manual Transmission Cars?

Introduction to causes of weak acceleration when starting: 1. Engine or transmission issues: This is a fault-induced weak acceleration that requires timely troubleshooting; 2. Small engine displacement with heavy load: Many modern vehicles adopt small-displacement turbocharged powertrains. When starting, the engine may not reach the turbocharging RPM, resulting in perceived weak acceleration - this is normal. Other possible causes include: 1. Throttle carbon buildup: Carbon deposits on the throttle body affect air intake volume, leading to insufficient engine power and weak acceleration. The solution is throttle cleaning. 2. Transmission clutch failure: The clutch transmits and disengages engine power. Manual transmissions and dual-clutch transmissions use friction plate clutches. Prolonged use causes severe wear and slipping, resulting in weak acceleration.
16
1
Share

What is the P2138 fault?

If the vehicle displays the P2138 fault code, it indicates an issue with the car's throttle or accelerator pedal sensor. The specific cause should be diagnosed by professionals at a repair shop or 4S dealership. Details are as follows: 1. Throttle failure: When the throttle malfunctions, symptoms may include engine shaking, unstable idling, poor acceleration, and difficulty starting when cold. In such cases, the throttle should be thoroughly cleaned, especially removing any oil sludge buildup. If the throttle is structurally damaged, it should be replaced promptly. 2. Accelerator pedal sensor problem: When the accelerator pedal fails, symptoms may include weak acceleration, severe jerking, and unresponsiveness to throttle input. In this situation, the accelerator pedal sensor should be inspected, and high-quality fuel should be used regularly. After repairs, the fault code must be cleared promptly; otherwise, it may cause memory confusion in the vehicle's electronic system, leading to unnecessary issues later on.
13
3
Share

What does Lexus ODO mean?

Lexus ODO is an abbreviation of the English word odograph (representing total mileage, automatic odometer). ODO cannot be reset. Below is a detailed introduction about Lexus vehicles: 1. Overview: Lexus was established in 1983 and is a globally renowned luxury car brand under the Japanese Toyota Group. Main models include LM, UX300e, ES, RX, NX, UX, CT, LS, LC, LY650, etc. 2. Others: Lexus was first launched in North America. The pronunciation of "Lexus" is similar to the English word "Luxury," evoking associations with luxury cars. The Lexus car logo uses the uppercase letter "L" from the name "Lexus," enclosed within an oval. The oval represents the Earth, symbolizing that Lexus vehicles are distributed worldwide.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.