···
Log in / Register

Where is the cabin air filter located in the Trumpchi GS5?

4 Answers
JosieFitz
07/24/25 9:30pm
The cabin air filter of the Trumpchi GS5 is located inside the glove box on the passenger side. Additional information about the Trumpchi GS5 is as follows: 1. The Trumpchi GS5 is a trendy urban SUV newly developed by GAC Motor based on a high-performance European vehicle chassis. It features a stylish and dynamic exterior design, offering European-level driving comfort and safety, surpassing world-class quality in its segment. 2. The Trumpchi GS5 adopts a unique wing-style grille that combines family identity with sporty characteristics. 3. The Trumpchi GS5 is equipped with two engine options: a 2.0L DCVVT and a 1.8T turbocharged engine. The 2.0L DCVVT engine provides ample power with good fuel economy, while the 1.8T engine delivers even stronger performance, enabling the Trumpchi GS5 to possess snow leopard-like explosive power.
Was this review help?
1
2
Share
Adriana
08/10/25 9:46am
I've changed the air conditioning filter on my Trumpchi GS5 myself, which is located behind the glove compartment on the passenger side. You need to move the seat back to make space, then crouch down to look at the bottom of the glove compartment. There are twist-type fasteners on the left and right inner sides of the glove compartment; turn them 90 degrees counterclockwise to remove them, and the entire glove compartment will naturally hang down. At this point, you can see a black rectangular cover, usually with a filter icon printed on it. Press the fasteners on both sides of the cover towards the middle, and the entire cover can be removed. The filter is accordion-folded and can be pulled out directly. When installing the new one, pay attention to the arrow direction, which should point towards the rear of the car; otherwise, it will affect the filtering efficiency. Be careful not to force or pull hard during the process, as it's easy to break the plastic parts. It's best to watch a video for the first time to see the proper technique. The location hasn’t changed much for the facelifted models after the 2019 version.
Was this review help?
11
0
Share
Expand All
VonSara
09/26/25 5:30am
Just replaced the AC filter for my GS5, and the location is quite user-friendly. The key is inside the glove compartment on the passenger side: after fully opening the glove box, press both sides inward with your hands until you hear a click, indicating the stopper has disengaged. At this point, the entire glove box will flip down 90 degrees. No screws need to be removed to reveal the vertical white plastic cover behind it. The cover has clips at the top and bottom—use your index finger to push the top clip and your thumb to press the bottom clip, then pull outward to open it. The filter is a grayish-black rectangle with activated carbon. Remember to align the pleats vertically when installing the new filter, with the arrow mark facing the driver's seat. A quick tip: replacing the filter before the rainy season can prevent musty odors, and it should be changed every six months.
Was this review help?
19
2
Share
Expand All
OAngela
11/09/25 7:34am
The air filter for the Trumpchi GS5 is hidden in the passenger side. When performing the replacement, first empty the glove compartment, then use both hands to firmly squeeze the inner sides of the compartment towards the middle, causing the entire compartment to drop down. Be careful not to let go and leave the compartment hanging, as this can easily damage the damping rod. Once removed, you will directly see a 30cm long plastic cover panel at the back, with two spring clips on top of the panel. Use a flat-head screwdriver to gently pry open the clips. When removing the old filter, observe the direction of the arrow; the new filter must be installed with the same airflow direction. After replacement, turn on the maximum fan speed for two minutes to blow away any fiber debris from the filter. This location is much more reasonable compared to some models that require removing the accelerator pedal.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

Do Motorcycles Have CVT?

Motorcycles do have CVT. How Motorcycle CVT Works: The CVT in motorcycles is a continuously variable transmission system, a type of transmission without gears. It relies on a centrifugal clutch and a drive belt to transmit power and control speed changes. Scooter motorcycles mostly use this transmission system. Advantages of Motorcycle CVT: In normal operation, a typical geared motorcycle requires at least the operation of the throttle, clutch, and gear lever. However, the CVT system used in scooter motorcycles eliminates the need for shifting gears. Only the throttle needs to be operated to drive the vehicle easily. Besides being simple and easy to use, the combination of the belt and the pulley also produces relatively low vibration, ensuring considerable comfort.
7
4
Share

Does Driving a New Car on the Highway Reduce Fuel Consumption?

Driving a new car on the highway can reduce fuel consumption. Factors that help reduce fuel consumption when driving on the highway: When a car is driven on the highway, the engine inevitably increases its RPM due to the higher speed. This helps burn off some carbon deposits that accumulated during low-speed driving when the engine RPM was too low. As a result, the engine is effectively cleaned, combustion becomes more efficient, and there is a slight improvement in power. Factors affecting car fuel consumption: The car's own technology has a significant impact on fuel consumption. Compared to cars from the last century, modern vehicles are much more fuel-efficient, highlighting the importance of automotive technology. Several key technologies influence fuel consumption, including engine performance, vehicle weight, transmission efficiency, and overall vehicle condition.
7
3
Share

What Causes Abnormal Noises When Refueling a Motorcycle?

This noise could be caused by unstable engine combustion or air leaks. Solutions: Check the air filter, intake pipe, secondary air injection system pipes, and carburetor mixture ratio for any abnormalities. Clean and adjust the carburetor, and inspect the spark plugs for issues. Motorcycle Refueling Precautions: Avoid refueling during hot midday hours in summer when temperatures are high. Gasoline is sold by volume rather than weight and is subject to thermal expansion and contraction. Refueling in the morning or evening allows for more mass per volume of gasoline, saving you money.
10
3
Share

What does displacement power 1975ml, 101kw mean?

Displacement is 1975ml = 1.975L (liters). 101kw is the engine power Meaning of displacement: The displacement of a car refers to the total capacity of all cylinders in the engine. For example, if a car engine has 4 cylinders, each with a capacity of 0.5 liters, then the engine displacement is 0.5 liters multiplied by 4 = 2.0 liters. Meaning of engine power: Engine power refers to how fast the engine does work. The work done by the engine per unit time is called the engine power. Relationship between displacement and engine power: Engine power generally depends mainly on the engine's displacement and speed. When the displacement is constant, the higher the engine speed and the larger the displacement, the greater the power.
2
5
Share

How to Replace Spark Plugs in the New Cruze?

Determine whether to replace the spark plugs ahead of schedule or shorten the manual standards based on the symptoms of spark plug failure. The spark plug is a crucial component of the gasoline engine's ignition system. It introduces high voltage into the combustion chamber and causes it to jump across the electrode gap to generate a spark, thereby igniting the combustible mixture in the cylinder. Under the effect of high voltage, the air between the spark plug's center electrode and the side electrode rapidly ionizes, forming positively charged ions and negatively charged free electrons. When the voltage between the electrodes reaches a certain level, the number of ions and electrons in the gas increases like an avalanche, causing the air to lose its insulating properties. A discharge channel forms in the gap, leading to a "breakdown" phenomenon. At this point, the gas becomes a luminous body, known as a "spark." Along with thermal expansion, a "crackling" sound is also produced. The temperature of this electric spark can reach as high as 2000-3000°C, sufficient to ignite the mixture in the cylinder's combustion chamber.
5
4
Share

Why is the interior light turned off while driving?

Driving with the interior light off is due to obstructed vision and physiological reasons. Obstructed vision: The fundamental reason for turning off the light at night is that when the outside light is dim and the interior light is on, a physical imaging phenomenon occurs. The darkness outside acts like the back of a mirror, while the bright interior light acts like the front of the mirror, turning the windshield into a full-fledged mirror. Driving under these conditions can easily lead to traffic accidents. Physiological reasons: The human pupil controls the amount of light entering the eye. In bright light, the pupil constricts to prevent too much light from entering. In dim light, the pupil dilates to allow more light in for better vision. During nighttime driving, the dark interior allows the pupil to dilate, improving road visibility. If the interior light is turned on, the light causes the pupil to constrict, thereby worsening visibility.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.