···
Log in / Register

Where is the cabin air filter located in the Tiguan L?

4 Answers
ColemanLynn
07/28/25 6:47pm
The cabin air filter in the Tiguan L is located under the glove compartment. Its functions are: 1. To provide fresh air; 2. To absorb harmful substances; 3. To filter solid impurities. Taking the 2021 Tiguan L 2WD Comfort Edition as an example, its body dimensions are: 4712mm in length, 1839mm in width, and 1673mm in height, with a wheelbase of 2791mm, a fuel tank capacity of 60 liters, and a trunk capacity of 495 liters. The 2021 Tiguan L 2WD Comfort Edition features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 186 PS, a maximum power of 137 kW, and a maximum torque of 320 Nm.
Was this review help?
12
1
Share
ElijahMarie
08/11/25 10:43pm
I've been driving a Volkswagen Tiguan L for a while, and I'm very familiar with the location of the cabin air filter—it's behind the glove compartment in front of the passenger seat. Replacing it isn't difficult; you just need to remove the glove compartment first. The glove compartment is usually secured by a few clips or screws. Use a small screwdriver to gently pry them open or unscrew them, then take out the entire compartment to reveal the filter cover inside. After opening the cover, simply pull out the old filter and replace it with a new one. Buying a compatible filter online is very affordable, and even the OEM ones aren't expensive. Doing it yourself saves time and money. I usually replace it every six months or every 10,000 kilometers, and I always change it before summer to ensure fresh air conditioning. Don’t forget to check the arrow direction on the filter during installation to avoid putting it in backward, which could affect performance. Take your time during the first replacement—don’t rush. After a few tries, you’ll get the hang of it. Be gentle with the plastic parts to avoid damage. The filter is placed there to be close to the blower, ensuring smooth airflow.
Was this review help?
17
2
Share
Expand All
LaEllie
09/30/25 4:25am
I've been driving the Tiguan L for several years, and the cabin air filter is located behind the glove compartment on the passenger side. Open the glove box, and you'll find the filter cover. Make sure the vehicle is turned off during replacement to prevent accidents. I recommend purchasing activated carbon filters for better performance. Replace it once a year or every 15,000 kilometers, adjusting based on driving conditions. DIY is super easy: use a small screwdriver to remove screws or press the clips, then take off the glove box to access the cover, pull out the old filter and install the new one. The design is reasonable there, allowing quick access to the blower. Remember to keep clean during operation and avoid dirtying the interior. Regular filter replacement has many benefits, especially practical for reducing dust and odors inside the car, which is particularly helpful for people sensitive to pollen. Although the location is not obvious, it's easy to find, and there are plenty of online tutorials to assist learning.
Was this review help?
17
3
Share
Expand All
AdamDella
11/13/25 6:17am
I always check the air conditioning filter before servicing my Tiguan L. It's located behind the inner side of the glove compartment on the passenger side. To replace it, first remove the glove compartment clips, then you'll see the cover plate. Open it and you'll find the filter. Don't underestimate this small part - when dirty, it can develop a musty smell. Replacing it yourself is quick and easy; just buy a new filter and insert it. Generally, it should be replaced once a year to maintain air quality. The location is convenient and unobtrusive. Remember to check the airflow direction when installing - the arrow usually points downward. While cleaning the interior, take the opportunity to check for any potential leaks.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

Corolla's Fuel Consumption with Air Conditioning in Summer?

Corolla's fuel consumption with air conditioning in summer is 9.69 liters per 100 kilometers. Below is a detailed introduction about it: 1. Introduction 1: Equipped with a 1.2T turbocharged engine, among its peers, as a Japanese model, its fuel economy is decent. 2. Introduction 2: Manual transmission models with air conditioning indeed have a more significant impact on fuel consumption when the air conditioning is turned on, while automatic transmission models with air conditioning are relatively more fuel-efficient. 3. Introduction 3: The temperature setting does not affect fuel consumption, but the fan speed is key, depending on the engine's speed regulation type, which may be related to fuel consumption.
19
2
Share

What are the features of BMW xDrive?

xDrive refers to BMW's intelligent all-wheel drive system, which can quickly change the torque distribution between the front and rear axles while driving, providing the driver with more stable driving performance. Here are some relevant details: 1. Example: During driving, if the car experiences understeer where the front wheels are pulled towards the outside of the curve, the intelligent all-wheel drive system will reduce the torque distributed to the front axle and then transfer the car's power to the rear axle. 2. Specific function: The intelligent all-wheel drive system can work in conjunction with the dynamic stability system to identify wheel slippage. When the car experiences slippage, xDrive's diaphragm clutch is locked by the motor, and the motor transmits appropriate power to the wheel with the best grip. Meanwhile, the slipping wheel is controlled by the braking system to ensure the car's stability.
15
0
Share

Does changing to AT tires affect an SUV?

Changing to AT tires does affect an SUV, with noticeable impacts such as increased fuel consumption, longer braking distance, and significantly slower acceleration. Additional details are as follows: 1. Noticeable increase in fuel consumption: Each AT100 tire is approximately 5kg heavier than a city tire of the same size, leading to a significant rise in fuel consumption. 2. Longer braking distance: Initially, drivers may find it hard to adapt, feeling that the vehicle doesn't brake as effectively as before, requiring deeper pedal pressure. The primary reason is the increased tire weight, which raises the rotational inertia of the tires. 3. Significantly slower acceleration: The substantial increase in tire weight adds to the axle load, weakening the vehicle's acceleration capability and making acceleration noticeably slower.
2
2
Share

What Causes Coolant Leakage at Pipe Joints?

Coolant leakage at pipe joints is generally caused by the liquid being overfilled or the water temperature being too high. Below is relevant information about automotive coolant: 1. Function: To dissipate heat from the engine. Without coolant, the car's engine and radiator lack protection, which affects the heat dissipation efficiency of the radiator. The engine temperature will continue to rise without effective cooling, and the coolant cannot circulate properly. Continuing to drive under such conditions may severely damage the engine. 2. Weather factors: In cold climates, it can also cause the engine or radiator to freeze, leading to engine failure and rendering the vehicle inoperable. 3. Lack of water preventing circulation: The cooling system circulates coolant via the water pump to carry heat away from the engine. A lack of coolant will prevent this circulation and heat dissipation, damaging the engine.
6
5
Share

What are the symptoms of a bad release bearing?

Symptoms of a bad release bearing: 1. Normal sound in neutral gear, but a rustling noise when pressing the clutch; 2. A hissing sound similar to metal friction when driving with gears engaged. Daily maintenance for the release bearing includes: 1. Follow operating procedures to avoid the clutch being in a semi-engaged or semi-disengaged state, and reduce the frequency of clutch usage; 2. Regularly or during inspection and maintenance, remove the release bearing to clean out impurities and soak it in lubricating oil using the boiling method to ensure sufficient lubrication. The release bearing generally refers to the clutch release bearing in a car, which is a relatively important component in the vehicle.
18
0
Share

Does the Civic Sport Edition have one-touch power windows?

The Civic Sport Edition is equipped with one-touch power window functionality. However, this feature needs to be activated at an authorized dealership, which requires signing a liability waiver (as one-touch operation carries certain risks). To use this feature, simply press and hold the lock or unlock button on the remote key. Additional information is provided below: 1. Definition: One-touch power window refers to when the vehicle's computer detects that the window switch has been engaged (lifted and immediately released) for less than a preset duration, it will send a continuous command to the window motor to raise the window until fully closed. If the window switch is lifted or pressed again during this process, the window movement will stop. 2. Functionality: If the window switch is continuously held upward for longer than the preset one-touch duration, the window will continue to rise, but will stop immediately upon releasing the switch. 3. Anti-pinch feature: One-touch power windows must be used in conjunction with an anti-pinch mechanism, otherwise there's a high risk of injury as the motor's lifting force is substantial. This is why many vehicle models offer one-touch down but not one-touch up functionality. The anti-pinch system includes additional motor current monitoring and control circuits that detect when current exceeds a safe range (indicating obstacle interference causing motor overload) and stops the motor accordingly.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.