Where is the cabin air filter located in the Senova D70?
2 Answers
The cabin air filter of the Senova D70 is located inside the cover panel on the left side below the glove compartment on the passenger side. After removing the glove compartment, you will see an evaporator cover panel on the left side. Remove this cover panel to access the cabin air filter. During each maintenance service, it is advisable to check whether the cabin air filter is clogged. When cleaning the cabin air filter, never use water. Typically, compressed air is used to blow through the filter from the reverse side for cleaning. The Senova D70 is positioned as a mid-size sedan. In terms of dimensions, it measures 4861mm in length, 1820mm in width, and 1462mm in height, with a wheelbase of 2755mm. For powertrain, all variants are equipped with a 1.8T inline 4-cylinder turbocharged engine, paired with a 5-speed automatic transmission, delivering maximum power of 130KW (177PS) and peak torque of 240Nm.
The cabin air filter of the Senova D70 is conveniently located behind the glove compartment on the passenger side. First, open the glove compartment and you'll see a retaining clip on each side. Press the inner part of both clips simultaneously with both hands to gently lower the entire glove compartment. After removing the glove box, there's a rectangular plastic cover inside. Simply unclip the fasteners on the cover to access the cabin air filter. When replacing, pay attention to the arrow direction on the filter - the OEM part is usually marked as CF001 model, and choosing one with activated carbon provides better filtration. I recommend replacing it every six months, especially in northern areas with heavy sandstorms, as a clogged filter can reduce airflow and increase fuel consumption. Perform this operation in a clean area, and avoid pulling the glove compartment too hard to prevent plastic parts from breaking.
