Where is the cabin air filter located in the Range Rover Evoque?

1 Answers
JosiahAnn
07/25/25 3:50pm
The cabin air filter in the Range Rover Evoque is located inside the glove compartment on the passenger side. To replace it, you need to first remove the white bracket. There is a protective panel next to the bracket, which can be removed by releasing three clips separately. After removing the panel, you can access and replace the cabin air filter inside. The dimensions of the Range Rover Evoque are: length 4545mm, width 1856mm, height 1668mm, with a wheelbase of 2680mm, minimum ground clearance of 190mm, and a curb weight of 1480kg. The Range Rover Evoque is equipped with a 2.0T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 249PS, maximum torque of 365Nm, and maximum power of 183kW. The engine reaches its maximum power at 4000 to 5500rpm and maximum torque at 1300 to 4500rpm, paired with a 9-speed automatic transmission.
Was this review help?
19
5
Share
More Forum Discussions

How to Adjust the Clock on a Buick GL8?

When the ignition switch of the Buick GL8 is in the ACC (Accessory) or ON position, the digital clock displays the time. The digital clock has two adjustment buttons. The specific methods are as follows: 1. H: Hour button. To adjust the time forward by more than one hour, press and hold the H button until the correct time is reached. 2. M: Minute button. To adjust the time forward by one minute, press the M button. To adjust the time forward by more than one minute, press and hold the M button until the correct time is reached. 3. S: Set button. To reset the time to the nearest whole hour, press the S button. For example, if you press this button between 8:00 and 8:29, the time display will be reset to 8:00.
20
4
Share

What does the letter K represent in a car's model year?

The Vehicle Identification Number (VIN) is a 17-character code formed by a combination of letters and numbers, often referred to as the "car's ID card." The 10th character represents the model year, with K indicating vehicles manufactured in 2019. Below is relevant information: 1. The Vehicle Identification Number (VIN), also known as the chassis number, is a unique 17-character alphanumeric code assigned to each vehicle. It identifies the manufacturer, engine, chassis serial number, and other specifications of the car. 2. How to read a car's VIN: The 1st character "L" represents China. The 2nd and 3rd characters indicate the manufacturing plant. Characters 4-9 represent the vehicle type and configuration. The 10th character denotes the model year, using a letter or number (excluding 0, O, Q, I, and Z). The 11th character identifies the assembly plant with a letter or number. The last 6 characters are the production sequence number.
6
4
Share

What Causes the Clutch Pedal Not to Return to Position?

The reasons for the clutch pedal not returning to position are as follows: 1. There are two main causes for the clutch pedal not returning. First, with sufficient brake fluid, if the clutch master cylinder is damaged, the clutch pedal will not return, and the vehicle can only be driven after replacing the faulty clutch master cylinder. 2. Second, if there is no brake fluid or if the brake fluid delivery pipe is cracked and leaking, causing the brake fluid level to drop to an unreasonable state, the clutch will not automatically return. Additional Information: 1. The clutch refers to the separation device between the car engine and the transmission, also known as the clutch. In automatic transmission vehicles, the clutch is integrated into the transmission to enable automatic shifting. The clutch is not the brake. In purely automatic transmission vehicles, there is no clutch, only the brake and accelerator pedals. 2. The clutch should not be used as a brake. If the clutch is pressed while going downhill, the car will accelerate because the drivetrain is disconnected from the wheels, and the engine can no longer control the vehicle. The car's speed will increase under the influence of inertia and gravity.
16
3
Share

How to turn off the NIO ES8?

The NIO ES8 does not have a start button or a shut-off button. The NIO ES8 is equipped with a smart key that can be used to perform the shut-off operation. The steps are as follows: 1. After parking, shift to P gear and take the car key with you. 2. After exiting and closing the door, press the lock button on the key to automatically shut off the engine and lock the car. Here is some information about this car: 1. Exterior. The NIO ES8 features a large front grille, with unique and bold designs for the daytime running lights and headlight areas. The side profile includes a floating roof, while the rear adopts streamlined LED taillights, resulting in a design that is both simple and elegant. 2. Interior. The NIO ES8 primarily uses a vertical 10.4-inch in-car screen to control most functions, equipped with an "In-Car AI Assistant" human-machine interaction system. 3. Performance. The NIO ES8 is equipped with dual front and rear AC asynchronous motors, each with a maximum power output of 240kW (326PS) and a peak torque of 420N·m. The official 0-50km/h acceleration time is 2.2 seconds, and the 0-100km/h acceleration time is just 4.4 seconds. It comes with a 70kWh ternary lithium battery, which can charge from 0 to 80% in 1 hour under fast charging mode.
14
4
Share

What does a triangle with an exclamation mark inside indicate?

It indicates an important warning in the vehicle. You can press the function button on the left side of the steering wheel to access the warning section and see what it is alerting you about. Generally, it could be one of the following situations: 1. It might indicate low fuel, low tire pressure, or low engine oil. In some vehicles, this light serves as the traction control system warning light, which may appear after a wheel loses signal during an inspection (when the wheels are suspended) and can be resolved by visiting a service station for adjustment. 2. It could also indicate issues with the ABS or traction control system, alerting you that driving may be affected on poor road conditions. It is recommended to visit a service station for inspection when possible. This indicator is the TCS (Traction Control System) light. 3. The dashboard varies among different vehicles, but common gauges include the speedometer, tachometer, oil pressure gauge, coolant temperature gauge, fuel gauge, and charging gauge. 4. The brake warning light is red and features a circle with an "!" symbol inside. If the red brake warning light is illuminated, it indicates one of the following issues with the braking system: severely worn brake pads, low brake fluid level, or the parking brake being engaged (parking brake switch closed).
9
1
Share

Where is the VIN number on the Haval H6?

The VIN number of the Haval H6 is located at: 1. The lower right corner of the front windshield; 2. On the crossbeam under the front passenger seat; 3. Behind the engine side. More details are as follows: 1. The Haval H6 is a compact SUV with body dimensions of 4653mm in length, 1886mm in width, 1730mm in height, and a wheelbase of 2738mm. 2. The Haval H6 is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 211PS, a maximum power of 155kW, and a maximum torque of 325Nm. Its tire specification is 235/60R18, with a non-full-size spare tire. It features a MacPherson independent front suspension and a double-wishbone independent rear suspension.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.